# Zsh configuration file.
# Copyright (C) 2011-2018 Simon Ruderich
#
# This file is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This file is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this file. If not, see .
# Warn when creating global variables from inside a function. Needs to be set
# before declaring a function.
setopt warn_create_global
# HELPER FUNCTIONS
# Return the name of the program which is called in the foreground with `fg`.
# $1 is the name of the program (optional). If it's not 'fg' or 'fg *' it's
# returned unchanged.
zshrc_resolve_fg_to_resumed_job_name() {
# $REPLY is used by convention for scalars ($reply for arrays) to return
# values from functions. unset it here to prevent problems when REPLY is
# bound to an integer or similar. Thanks to Mikachu in #zsh on Freenode
# (2012-09-27 17:14 CEST) for this hint.
unset REPLY
# Replace fg with the resumed job name.
if [[ $1 == fg ]]; then
REPLY=${jobtexts[%+]}
elif [[ $1 == fg\ * ]]; then
REPLY=${jobtexts[${1#fg }]}
# Normal program, return as is.
else
REPLY=$1
fi
}
# MISCELLANEOUS SETTINGS
# Prevent warnings.
typeset -g TMOUT
# Load general shell setup commands. NOTE: Expand this when publishing the
# config.
source_config ~/.shell/rc
# Disable beeps.
setopt nobeep
# Prevent overwriting existing files with '> filename', use '>| filename'
# (or >!) instead.
setopt noclobber
# Entering the name of a directory (if it's not a command) will automatically
# cd to that directory.
setopt autocd
# When entering a nonexistent command name automatically try to find a similar
# one.
setopt correct
# Enable zsh's extended glob abilities.
setopt extendedglob
# Don't exit if is pressed. Prevents exiting the shell by accident (e.g.
# pressing twice).
setopt ignoreeof
# Also display PID when suspending a process.
setopt longlistjobs
# KEY BINDINGS
# Not all bindings are done here, only those not specific to a given section.
# Use Vi(m) style key bindings.
bindkey -v
# Use jk to exit insert mode (jj is too slow to type).
bindkey 'jk' vi-cmd-mode
# I don't need the arrow keys, I use ^N and ^P for this (see below).
bindkey -r '^[OA' '^[OB' '^[OC' '^[OD' '^[[A' '^[[B' '^[[C' '^[[D'
# Also not in Vi mode.
bindkey -a -r '^[OA' '^[OB' '^[OC' '^[OD' '^[[A' '^[[B' '^[[C' '^[[D'
# FUNCTION SETTINGS
# Make sure every entry in $fpath is unique.
typeset -U fpath
# ~/.zsh/functions/completion is a symbolic link to the Completion directory
# of a Zsh Git checkout. Use it to get the newest completions if available.
if [[ -d ~/.zsh/functions/completion ]]; then
fpath=(~/.zsh/functions/completion/*/*(/) $fpath)
fi
# Set correct fpath to allow loading my functions (including completion
# functions).
fpath=(~/.zsh/functions $fpath)
# Autoload my functions (except completion functions and hidden files). Thanks
# to caphuso from the Zsh example files for this idea. Check if there are any
# functions to load or autoload fails; thanks to okdana in #zsh on Freenode
# (2018-07-18 09:29 CEST) for the idea to use (#qNY1) for the check.
if [[ -d ~/.zsh/functions && -n ${fpath[1]}/^_*(#qNY1^/:t) ]]; then
autoload -Uz ${fpath[1]}/^_*(^/:t)
fi
# Simulate hooks using _functions arrays for Zsh versions older than 4.3.4. At
# the moment only precmd(), preexec() and chpwd() are simulated.
if [[ $ZSH_VERSION != (4.3.<4->*|4.<4->*|<5->*) ]]; then
# Run all functions defined in the ${precmd,preexec,chpwd}_functions
# arrays.
function precmd() {
for function in $precmd_functions; do
$function "$@"
done
}
function preexec() {
for function in $preexec_functions; do
$function "$@"
done
}
function chpwd() {
for function in $chpwd_functions; do
$function "$@"
done
}
fi
# Load zmv (zsh move) which is a powerful file renamer.
autoload -Uz zmv
# HISTORY SETTINGS
# Use history and store it in ~/.zsh/history.
HISTSIZE=1000000
SAVEHIST=1000000
HISTFILE=~/.zsh/history
# Append to the history file instead of overwriting it and do it immediately
# when a command is executed.
setopt appendhistory
setopt incappendhistory
# If the same command is run multiple times store it only once in the history.
setopt histignoredups
# Don't add lines starting with a space to the history.
setopt histignorespace
# Vim like completions of previous executed commands (also enter Vi-mode). If
# called at the beginning it just recalls old commands (like cursor up), if
# called after typing something, only lines starting with the typed text are
# returned. Very useful to get old commands quickly - in addition to the
# history commands (!..). Thanks to Mikachu in #zsh on Freenode (2010-01-17
# 12:47 CET) for the information how to a use function with bindkey.
zle -N zshrc-vi-history-beginning-search-backward
zshrc-vi-history-beginning-search-backward() {
local not_at_beginning_of_line
if [[ $CURSOR -ne 0 ]]; then
not_at_beginning_of_line=yes
fi
zle history-beginning-search-backward
# Start Vi-mode and stay at the same position (Vi-mode moves one left,
# this counters it).
zle vi-cmd-mode
if [[ -n $not_at_beginning_of_line ]]; then
zle vi-forward-char
fi
}
bindkey '^P' zshrc-vi-history-beginning-search-backward
bindkey -a '^P' history-beginning-search-backward # binding for Vi-mode
# Here only Vi-mode is necessary as ^P enters Vi-mode and ^N only makes sense
# after calling ^P.
bindkey -a '^N' history-beginning-search-forward
# Use current input when pressing Ctrl-R. Thanks to Mikachu in #zsh on
# Freenode (2016-07-08 20:54 CEST).
zshrc-history-incremental-pattern-search-backward() {
zle .history-incremental-pattern-search-backward $BUFFER
}
zle -N history-incremental-pattern-search-backward \
zshrc-history-incremental-pattern-search-backward
# Enable incremental search which is especially useful when the string is an
# argument and not the command.
bindkey '^R' history-incremental-pattern-search-backward
# Also enable my usual use of Ctrl-P/Ctrl-N to get the previous/next matching
# history entry.
if [[ $ZSH_VERSION == (4.<4->*|<5->*) ]]; then
bindkey -M isearch '^P' history-incremental-pattern-search-backward
bindkey -M isearch '^N' history-incremental-pattern-search-forward
fi
# Automatically push cd-ed directories on the directory stack.
setopt autopushd
# Don't push duplicates on the directory stack.
setopt pushdignoredups
# Exchange the meaning of + and - when specifying a directory on the stack.
# This way cd - lists the last used directory first, which is more
# natural because cd - goes to the last directory.
setopt pushdminus
# PROMPT SETTINGS
# Use colorized output, necessary for prompts and completions.
autoload -Uz colors; colors
# Necessary for $EPOCHSECONDS, the UNIX time.
zmodload zsh/datetime
# Some shortcuts for colors. The %{...%} tells zsh that the data in between
# doesn't need any space, necessary for correct prompt drawing. Use %F{color}
# in more recent zsh versions (here compatibility is important).
local red="%{${fg[red]}%}"
local blue="%{${fg[blue]}%}"
local green="%{${fg[green]}%}"
local yellow="%{${fg[yellow]}%}"
local default="%{${fg[default]}%}"
# Linux network namespace
local netns="$(ip netns identify 2>/dev/null)"
# vcs_info was added in 4.3.9 but it works in earlier versions too. So load it
# if the necessary files are available in ~/.zsh/functions/vcs_info (often a
# symbolic link to current checkout of Zsh's sources).
if [[ $ZSH_VERSION == (4.3.<9->*|4.<4->*|<5->*) ||
-d ~/.zsh/functions/vcs_info ]]; then
# Update fpath to allow loading the vcs_info functions.
if [[ -d ~/.zsh/functions/vcs_info ]]; then
fpath=(~/.zsh/functions/vcs_info/
~/.zsh/functions/vcs_info/Backends
$fpath)
fi
# Load vcs_info to display information about version control repositories.
autoload -Uz vcs_info
# Only look for certain VCS.
zstyle ':vcs_info:*' enable git
# Check the repository for changes so they can be used in %u/%c (see
# below). This comes with a speed penalty for bigger repositories.
zstyle ':vcs_info:*' check-for-changes yes
# Set style of vcs_info display. The current branch (green) and VCS (blue)
# is displayed. If there is an special action going on (merge, rebase)
# it's also displayed (red). Also display if there are unstaged or staged
# (%u/%c) changes.
if [[ $ZSH_VERSION == (4.3.<11->*|4.<4->*|<5->*) ||
-d ~/.zsh/functions/vcs_info ]]; then
zstyle ':vcs_info:*' formats \
"(${green}%b%u%c${default}:${blue}%s${default}%m)" \
"${green}%u%c${default}"
zstyle ':vcs_info:*' actionformats \
"(${green}%b%u%c${default}/${red}%a${default}:${blue}%s${default}%m)" \
"${green}%u%c${default}"
else
# In older versions %u and %c are not defined yet and are not
# correctly expanded.
zstyle ':vcs_info:*' formats \
"(${green}%b${default}:${blue}%s${default})"
zstyle ':vcs_info:*' actionformats \
"(${green}%b${default}/${red}%a${default}:${blue}%s${default})"
fi
# Set style for formats/actionformats when unstaged (%u) and staged (%c)
# changes are detected in the repository; check-for-changes must be set to
# true for this to work. Thanks to Bart Trojanowski
# (http://jukie.net/~bart/blog/pimping-out-zsh-prompt) for the idea
# (2010-03-11 00:20 CET).
zstyle ':vcs_info:*' unstagedstr '¹'
zstyle ':vcs_info:*' stagedstr '²'
# Default to run vcs_info. If possible we prevent running it later for
# speed reasons. If set to a non empty value vcs_info is run.
zshrc_force_run_vcs_info=1
# Cache system inspired by Bart Trojanowski
# (http://jukie.net/~bart/blog/pimping-out-zsh-prompt).
zstyle ':vcs_info:*+pre-get-data:*' hooks pre-get-data
+vi-pre-get-data() {
# Only Git and Mercurial support and need caching. Abort if any other
# VCS is used.
[[ $vcs != git && $vcs != hg ]] && return
# If the shell just started up or we changed directories (or for other
# custom reasons) we must run vcs_info.
if [[ -n $zshrc_force_run_vcs_info ]]; then
zshrc_force_run_vcs_info=
return
fi
# Don't run vcs_info by default to speed up the shell.
ret=1
# If a git/hg command was run then run vcs_info as the status might
# need to be updated.
case $(fc -ln $(($HISTCMD-1))) in
git* | g\ *)
ret=0
;;
hg*)
ret=0
;;
esac
}
# Display number of WIP stashes (this excludes manually named commits
# which might be used for something else), thanks to
# http://eseth.org/2010/git-in-zsh.html (viewed on 2013-04-27) for the
# idea to display the stash count.
function +vi-git-stashes() {
if [[ -s ${hook_com[base]/.git/refs/stash} ]]; then
local -a stashes
# Thanks to Valodim in #zsh on Freenode (2013-07-01 14:14 CEST)
# for the solution to "grep" the output with (M) and :#(...).
stashes=( ${(M)${(f)"$(git stash list 2>/dev/null)"}:#(*WIP*)} )
if [[ ${#stashes} -gt 0 ]]; then
hook_com[misc]+=" ${yellow}${#stashes}s${default}"
fi
fi
}
# Apply hooks to Git.
zstyle ':vcs_info:git*+set-message:*' hooks git-stashes
# Must run vcs_info when changing directories.
prompt_chpwd() {
zshrc_force_run_vcs_info=1
}
chpwd_functions+=(prompt_chpwd)
# Used by prompt code below to determine if vcs_info should be run.
zshrc_use_vcs_info=1
else
zshrc_use_vcs_info=
fi
typeset -a zshrc_longrun_data
zshrc_longrun_data=()
# Display runtime in seconds for long running programs (> 60 seconds) and send
# a bell to notify me.
zshrc_longrun_preexec() {
local program=$3
# Handle fg.
local REPLY
zshrc_resolve_fg_to_resumed_job_name $program
program=$REPLY
# No background process found.
if [[ -z $program ]]; then
return
fi
# Don't track the time for certain (possible) long running processes which
# need no automatic notification.
local ignore
for ignore in elinks man mutt vim; do
case $program in
$ignore | $ignore\ *)
zshrc_longrun_data=()
return
;;
esac
done
zshrc_longrun_data=($program $EPOCHSECONDS)
}
zshrc_longrun_precmd() {
# No previous timestamp available or disabled for this command, ignore.
if [[ -z $zshrc_longrun_data ]]; then
return
fi
local difference=$(( EPOCHSECONDS - zshrc_longrun_data[2] ))
if [[ $difference -gt 60 ]]; then
echo
echo -n "${fg[yellow]}"
echo -n "~> ${(V)zshrc_longrun_data[1]} took $difference seconds."
echo -n "${fg[default]}"
echo "\a" # send bell
fi
# Clear status. Prevents displaying old status information when pressing
# enter with an empty command line.
zshrc_longrun_data=()
}
preexec_functions+=(zshrc_longrun_preexec)
precmd_functions+=(zshrc_longrun_precmd)
# Set the prompt. A two line prompt is used. On the top left the current
# working directory is displayed, on the right vcs_info (if available) and the
# current time in hex. On the bottom left current user name and host is shown,
# the exit code of the last command if it wasn't 0, the number of running jobs
# if not 0.
#
# The prompt is in green and blue to make easily detectable, the error exit
# code in red and bold and the job count in yellow. Designed for dark
# terminals.
#
# Thanks to Adam's prompt for the basic idea of this prompt.
zshrc_prompt_precmd() {
# Regex to remove elements which take no space. Used to calculate the
# width of the top prompt. Thanks to Bart's and Adam's prompt code in
# Functions/Prompts/prompt_*_setup.
local zero='%([BSUbfksu]|([FB]|){*})'
# Call vcs_info before every prompt.
if [[ -n $zshrc_use_vcs_info ]]; then
vcs_info
else
vcs_info_msg_0_=
vcs_info_msg_1_=
fi
# Setup. Create variables holding the formatted content.
# Current directory in yellow, truncated if necessary (WIDTH is replaced
# below).
local directory="${yellow}%WIDTH<..<%~%<<${default}"
# Minimal information about the VCS, only displayed if there are
# unstaged/staged changes.
local vcs_staged=${vcs_info_msg_1_}
# Information about the VCS in this directory.
local vcs=${vcs_info_msg_0_}
# Current time (seconds since epoch) in Hex in bright blue.
local seconds="${blue}%B0x$(([##16] EPOCHSECONDS))%b${default}"
# User name (%n) in bright green.
local user="${green}%B%n%b${default}"
# Host name (%m) in bright green; underlined if running on a remote system
# through SSH.
local host="${green}%B%m%b${default}"
if [[ -n $SSH_CONNECTION ]]; then
host="%U${host}%u"
fi
# Linux network namespace if any
if [[ -n $netns ]]; then
host="${host}[$netns]"
fi
# Number of background processes in yellow if not zero.
local background="%(1j.${yellow}%j${default}.)"
# Exit code in bright red in parentheses if not zero.
local exitcode="%(?..(${red}%B%?%b${default}%) )"
# Prompt symbol, % for normal users, # in red for root.
local symbol="%(!.${red}#${default}.%%)"
# Prefix characters in first and second line.
local top_prefix="${blue}%B.-%b${default}"
local bottom_prefix="${blue}%B'%b${default}"
# Combine them to create the prompt.
local top_left=${vcs_staged}
local top_right="${vcs}(${seconds})"
local width_top_prefix=${#${(S%%)top_prefix//$~zero/}}
local width_top_left=${#${(S%%)top_left//$~zero/}}
local width_top_right=${#${(S%%)top_right//$~zero/}}
# Calculate the maximum width of ${top_left}. -2 are the braces of
# ${top_left}, -1 is one separator from ${top_separator} (we want at least
# one between left and right parts).
local top_left_width_max=$((
COLUMNS - $width_top_prefix
- $width_top_left - 2
- 1
- $width_top_right
))
# Truncate directory if necessary.
top_left="(${directory/WIDTH/${top_left_width_max}})${top_left}"
width_top_left=${#${(S%%)top_left//$~zero/}}
# Calculate the width of the top prompt to fill the middle with "-".
local width=$((
COLUMNS - width_top_prefix - width_top_left - width_top_right
))
local top_separator="%B${blue}${(l:${width}::-:)}%b${default}"
PROMPT="${top_prefix}${top_left}${top_separator}${top_right}
${bottom_prefix}${user}@${host} ${background}${symbol} ${exitcode}"
}
precmd_functions+=(zshrc_prompt_precmd)
# When GNU screen, tmux, xterm or rxvt is used set the name of the window to
# the currently running program.
#
# When a program is started preexec() sets the window's name to it; when it
# stops precmd() resets the window's name to 'zsh'. 'fg' is supported and sets
# the window's name to the resumed job.
#
# It works with GNU screen, tmux, xterm and rxvt.
#
# If a command is run with sudo or if the shell is running as root then a ! is
# added at the beginning of the command to make this clear. If a command is
# running on a different computer with ssh a @ is added at the beginning. If
# screen/tmux is running on the remote machine instead of @screen @:hostname
# (or @tmux ..; hostname replaced by the machine's hostname) is displayed.
# This only works if the .zshrc on the server also uses this command.
#
# screen* is necessary as `screen` uses screen.linux for example for a linux
# console.
if [[ $TERM == screen* || $TERM == xterm* || $TERM == rxvt* ]]; then
# Is set to a non empty value to reset the window name in the next
# precmd() call.
zshrc_window_reset=yes
zshrc_window_preexec() {
# Get the program name with its arguments.
local program_name=$1
# When sudo is used, use real program name instead, but with an
# exclamation mark at the beginning (handled below).
local program_sudo=
if [[ $program_name == sudo* ]]; then
program_name=${program_name#sudo }
program_sudo=yes
fi
# Handle fg.
local REPLY
zshrc_resolve_fg_to_resumed_job_name $program_name
program_name=$REPLY
# Remove all arguments from the program name.
program_name=${program_name%% *}
# Ignore often used commands which are only running for a very short
# time. This prevents a "blinking" name when it's changed to "cd" for
# example and then some milliseconds later back to "zsh".
[[ $program_name == (cd*|d|ls|l|la|ll|clear|c) ]] && return
# Change my shortcuts so the real name of the program is displayed.
case $program_name in
e)
program_name=elinks
;;
g)
program_name=git
;;
m)
program_name=make
;;
p)
program_name=less
;;
v)
program_name=vim
;;
mu)
program_name=mutt
;;
esac
# Add an exclamation mark at the beginning if running with sudo or if
# running zsh as root.
if [[ -n $program_sudo || $UID -eq 0 ]]; then
program_name=!$program_name
fi
# Add an at mark at the beginning if running through ssh on a
# different computer.
if [[ -n $SSH_CONNECTION ]]; then
program_name="@$program_name"
# If screen is running in SSH then display "@:hostname" as title
# in the term/outer screen.
if [[ $program_name == @screen || $program_name == @tmux ]]; then
program_name="@:${HOST//.*/}"
# Use "@:!hostname" for root screens.
elif [[ $program_name == @!screen || $program_name == @!tmux ]]; then
program_name="@:!${HOST//.*/}"
fi
fi
# Set the window name to the currently running program.
zshrc_window_title $program_name
# Tell precmd() to reset the window name when the program stops.
zshrc_window_reset=yes
}
zshrc_window_precmd() {
# Abort if no window name reset is necessary.
[[ -z $zshrc_window_reset ]] && return
# Reset the window name to 'zsh'.
local name=zsh
# If the function was called with an argument then reset the window
# name to '.zsh' (used by clear alias).
if [[ -n $1 ]]; then
name=.zsh
fi
# Prepend prefixes like in zshrc_window_preexec().
if [[ $UID -eq 0 ]]; then
name="!$name"
fi
if [[ -n $SSH_CONNECTION ]]; then
name="@$name"
fi
zshrc_window_title $name
# Just reset the name, so no screen reset necessary for the moment.
zshrc_window_reset=
}
# Sets the window title. Works with GNU screen, tmux (which uses screen as
# TERM), xterm and rxvt. (V) escapes all non-printable characters, thanks
# to Mikachu in #zsh on Freenode (2010-08-07 17:09 CEST).
if [[ $TERM == screen* ]]; then
zshrc_window_title() {
print -n "\ek${(V)1}\e\\"
}
elif [[ $TERM == xterm* || $TERM == rxvt* ]]; then
zshrc_window_title() {
print -n "\e]2;${(V)1}\e\\"
}
else
# Fallback if another TERM is used.
zshrc_window_title() { }
fi
# Add the preexec() and precmd() hooks.
preexec_functions+=(zshrc_window_preexec)
precmd_functions+=(zshrc_window_precmd)
else
# Fallback if another TERM is used, necessary to run screen (see below in
# "RUN COMMANDS").
zshrc_window_preexec() { }
fi
# COMPLETION SETTINGS
# Load the complist module which provides additional features to completion
# lists (coloring, scrolling).
zmodload zsh/complist
# Use new completion system, store dumpfile in ~/.zsh/cache to prevent
# cluttering of ~/. $fpath must be set before calling this. Thanks to Adlai in
# #zsh on Freenode (2009-08-07 21:05 CEST) for reminding me of the $fpath
# problem.
autoload -Uz compinit; compinit -d ~/.zsh/cache/zcompdump
# Use cache to speed up some slow completions (dpkg, perl modules, etc.).
zstyle ':completion:*' use-cache yes
zstyle ':completion:*' cache-path ~/.zsh/cache
# List all files in the current directory when pressing tab on an empty input,
# behave like complete-word otherwise. Thanks to John Eikenberry [1] for the
# code, read on 2014-03-15.
#
# [1]: http://unix.stackexchange.com/a/32426
complete-word-or-complete-list-of-files() {
if [[ $#BUFFER == 0 ]]; then
BUFFER='ls '
CURSOR=3
zle list-choices
zle backward-kill-word
else
zle complete-word
fi
}
zle -N complete-word-or-complete-list-of-files
# Let the completion system handle all completions, including expanding of
# shell wildcards (which is handled by other shell mechanisms if the default
# expand-or-complete is used).
bindkey '^I' complete-word-or-complete-list-of-files
# If there are multiple matches after pressing always display them
# immediately without requiring another . a completes to aa and
# lists aaa, aab, aac as possible completions if the directory contains aaa,
# aab, aac, bbb instead of only completing to aa.
setopt nolistambiguous
# Support completions in the middle of a word, without this option zsh jumps
# to the end of the word before the completion process begins. Is required for
# the _prefix completer.
setopt completeinword
# Force a reload of the completion system if nothing matched; this fixes
# installing a program and then trying to tab-complete its name. Thanks to
# Alex Munroe [1] for the code, read on 2014-03-03.
#
# [1]: https://github.com/eevee/rc/blob/master/.zshrc
_force_rehash() {
if (( CURRENT == 1 )); then
rehash
fi
# We didn't really complete anything.
return 1
}
zstyle ':completion:::::' completer \
_force_rehash _expand _complete _prefix _ignored _approximate
# Match specification to be tried when completing items. Each group ('...') is
# tried after another if no matches were found, once matches are found no
# other groups are tried. Thanks to Mikachu in #zsh on Freenode (2012-08-28
# 18:48 CEST) for explanations.
#
# When matching also include the uppercase variant of typed characters
# ('m:{a-z}={A-Z}'); using '' before this group would try the unmodified match
# first, but I prefer to get all matches immediately (e.g. if Makefile and
# makefile exist in the current directory echo m matches both, with '' it
# would only match makefile because it found one match). This allows typing in
# lowercase most of the time and completion fixes the case, which is faster.
#
# Don't perform these fixes in _approximate to prevent it from changing the
# input too much. Thanks to the book "From Bash to Z Shell" page 249.
zstyle ':completion:*:(^approximate):*' matcher-list 'm:{a-z}={A-Z}'
# Allow one mistake per three characters. Thanks to the book "From Bash to Z
# Shell" page 248.
zstyle -e ':completion:*:approximate:*' max-errors \
'reply=( $(( ($#PREFIX + $#SUFFIX) / 3 )) )'
# Expand shell wildcards to all matching files after . echo *
# results in a b c if the directory contains the files a, b, c. Thanks to the
# book "From Bash to Z Shell" page 246.
zstyle ':completion:*:expand:*' tag-order all-expansions
# Keep prefixes unexpanded if possible: $HOME/ doesn't expand $HOME,
# while $HOME does.
zstyle ':completion:*:expand:*' keep-prefix yes
# When completing multiple path components display all matching ambiguous
# components. For example /u/s/d/r/README lists all matching READMEs
# instead of just the matching paths up to the r/ component. Can be slow if
# there are many matching files.
zstyle ':completion:*' list-suffixes yes
# Use ls-like colors for completions.
zstyle ':completion:*' list-colors ${(s.:.)LS_COLORS}
# Make completion lists scrollable so "do you wish to see all n possibilities"
# is no longer displayed. Display current position in percent (%p).
zstyle ':completion:*:default' list-prompt '%p'
# Display group name (%d) (like 'external command', 'alias', etc.), in bold.
# Also display a message if _approximate found errors and no matches were
# found.
zstyle ':completion:*' format ' %B%d%b:'
zstyle ':completion:*:corrections' format ' %B%d%b (errors: %e)'
zstyle ':completion:*:warnings' format ' %Bno matches for %d%b'
# Display different types of matches separately.
zstyle ':completion:*' group-name ''
# Separate man pages by section.
zstyle ':completion:*' separate-sections yes
# Don't draw trailing / in bold (new in zsh 4.3.11). Thanks to Mikachu in #zsh
# on Freenode for the fix (2010-12-17 13:46 CET).
zle_highlight=(suffix:none)
# Ignore completion functions.
zstyle ':completion:*:functions' ignored-patterns '_*'
# When offering typo corrections, do not propose anything which starts with an
# underscore (such as many of Zsh's shell functions). Thanks to paradigm [1]
# for the idea (read on 2013-04-07).
#
# [1]: https://github.com/paradigm/dotfiles/blob/master/.zshrc
CORRECT_IGNORE='_*'
# Ignore parent directory.
zstyle ':completion:*:(cd|mv|cp):*' ignore-parents parent pwd
# Always complete file names only once in the current line. This makes it easy
# to complete multiple file names because I can just press tab to get all
# possible values. Otherwise I would have to skip the first value again and
# again. Thanks to Mikachu in #zsh on Freenode (2011-08-11 14:42 CEST) for the
# hint to use other. other is necessary so prefix lists both prefix and
# prefixrest if the directory contains prefix and prefixrest.
zstyle ':completion:*:all-files' ignore-line other
# Except for mv and cp, because I often want to use to similar names, so I
# complete to the same and change it.
zstyle ':completion:*:(mv|cp):all-files' ignore-line no
# Don't complete ./config.* files, this makes running ./configure much
# simpler. Thanks to Nomexous in #zsh on Freenode (2010-03-16 01:54 CET)
zstyle ':completion:*:*:-command-:*' ignored-patterns './config.*'
# Don't complete unwanted files with Vim. Thanks to Nomexous in #zsh on
# Freenode (2010-06-06 04:54 CEST). See below for a way to complete them.
zstyle ':completion:*:*:vim:*:all-files' ignored-patterns \
'*.aux' '*.log' '*.pdf' '*.bbl' '*.blg' '*.out' '*-blx.bib' '*.run.xml' \
'*.o' \
'*.pyc' \
'*.class'
# Provide a fallback completer which always completes files. Useful when Zsh's
# completion is too "smart". Thanks to Frank Terbeck
# (http://www.zsh.org/mla/users/2009/msg01038.html).
zle -C complete-files complete-word _generic
zstyle ':completion:complete-files:*' completer _files
bindkey '^F' complete-files
# Completion for my wrapper scripts.
compdef slocate=locate
compdef srsync=rsync
compdef srsync-incremental=rsync
compdef sc=systemctl
# CUSTOM ALIASES AND FUNCTIONS
# If ^C is pressed while typing a command, add it to the history so it can be
# easily retrieved later and then abort like ^C normally does. This is useful
# when I want to abort an command to do something in between and then finish
# typing the command.
#
# Thanks to Vadim Zeitlin for a fix (--) so lines
# starting with - don't cause errors; and to Nadav Har'El
# for a fix (-r) to handle whitespace/quotes
# correctly, both on the Zsh mailing list.
TRAPINT() {
# Don't store this line in history if histignorespace is enabled and the
# line starts with a space.
if [[ -o histignorespace && ${BUFFER[1]} = ' ' ]]; then
return $1
fi
# Store the current buffer in the history.
zle && print -s -r -- $BUFFER
# Return the default exit code so Zsh aborts the current command.
return $1
}
# Load aliases and similar functions also used by other shells.
if [[ -f ~/.shell/aliases ]]; then
. ~/.shell/aliases
fi
# Make sure aliases are expanded when using sudo.
alias sudo='sudo '
# Global aliases for often used redirections.
alias -g E='2>&1'
alias -g N='>/dev/null'
alias -g EN='2>/dev/null'
alias -g L='2>&1 | less'
alias -g LS='2>&1 | less -S' # -S prevents wrapping of long lines
alias -g D='2>&1 | colordiff | less'
# Global aliases for often used commands.
alias -g A='| awk'
alias -g A1="| awk '{ print \$1 }'"
alias -g A2="| awk '{ print \$2 }'"
alias -g A3="| awk '{ print \$3 }'"
alias -g G='| grep'
alias -g GB='| grep -vE "^Binary file .+ matches\$"'
alias -g H='| head'
alias -g P='| perl'
alias -g S='| sort'
alias -g SL='| sort | less'
alias -g T='| tail'
alias -g U='| uniq'
alias -g X='-- "$(xsel -p || xclip -o)"' # X selection
# Make going up directories simple.
alias -g ...='../..'
alias -g ....='../../..'
alias -g .....='../../../..'
# If the window naming feature is used (see above) then use ".zsh" (leading
# dot) as title name after running clear so it's clear to me that the window
# is empty. I open so much windows that I don't know in which I have something
# important. This helps me to remember which windows are empty (I run clear
# after I finished my work in a window).
if [[ -n $zshrc_window_reset ]]; then
alias clear='clear; zshrc_window_reset=yes; zshrc_window_precmd reset'
fi
# CUSTOM COMMANDS
# Display all branches (except stash) in gitk but only 200 commits as this is
# much faster. Also put in the background and disown. Thanks to drizzd in #git
# on Freenode (2010-04-03 17:55 CEST).
(( $+commands[gitk] )) && gitk() {
command gitk --max-count=200 --branches --remotes --tags "$@" &
disown %command
}
# Same for tig (except the disown part as it's no GUI program).
(( $+commands[tig] )) && tig() {
command tig --max-count=200 --branches --remotes --tags "$@"
}
# Choose the "best" PDF viewer available. Also setup completion for `pdf`.
if (( $+commands[katarakt] )); then
pdf() {
command katarakt "$@" 2>/dev/null &
disown %command
}
# No completion for katarakt yet.
compdef pdf=xpdf
elif (( $+commands[xpdf] )); then
pdf() {
command xpdf "$@" 2>/dev/null &
disown %command
}
compdef pdf=xpdf
elif (( $+commands[zathura] )); then
pdf() {
command zathura "$@" 2>/dev/null &
disown %command
}
# No completion for zathura yet.
compdef pdf=xpdf
fi
# OS SPECIFIC SETTINGS
if [[ $OSTYPE == linux* ]]; then
# Settings when creating Debian packages.
export DEBEMAIL=simon@ruderich.org
export DEBFULLNAME='Simon Ruderich'
fi
# LOAD ADDITIONAL CONFIGURATION FILES
# Configuration options for rc.local.
# Multiplexer to use. By default GNU screen is used. Possible values: screen,
# tmux and empty (no multiplexer).
zshrc_use_multiplexer=screen
# Additional arguments for fortune.
zshrc_fortune_arguments=()
source_config ~/.zsh/rc.local
# RUN COMMANDS
# Make sure the multiplexer is available. Otherwise the exec terminates our
# session.
if [[ -n $zshrc_use_multiplexer ]]; then
if ! (( $+commands[$zshrc_use_multiplexer] )); then
echo "Multiplexer '$zshrc_use_multiplexer' not found." >&2
zshrc_use_multiplexer=
fi
fi
# If not already in screen or tmux, reattach to a running session or create a
# new one. This also starts screen/tmux on a remote server when connecting
# through ssh.
if [[ $TERM != dumb && $TERM != dialup && $TERM != linux
&& -z $STY && -z $TMUX ]]; then
# Get running detached sessions.
if [[ $zshrc_use_multiplexer = screen ]]; then
session=$(screen -list | grep 'Detached' | awk '{ print $1; exit }')
elif [[ $zshrc_use_multiplexer = tmux ]]; then
session=$(tmux list-sessions 2>/dev/null \
| sed '/(attached)$/ d; s/^\([0-9]\{1,\}\).*$/\1/; q')
fi
# As we exec later we have to set the title here.
if [[ $zshrc_use_multiplexer = screen ]]; then
zshrc_window_preexec screen
elif [[ $zshrc_use_multiplexer = tmux ]]; then
zshrc_window_preexec tmux
fi
# Create a new session if none is running.
if [[ -z $session ]]; then
if [[ $zshrc_use_multiplexer = screen ]]; then
exec screen
elif [[ $zshrc_use_multiplexer = tmux ]]; then
exec tmux
fi
# Reattach to a running session.
else
if [[ $zshrc_use_multiplexer = screen ]]; then
exec screen -r $session
elif [[ $zshrc_use_multiplexer = tmux ]]; then
exec tmux attach-session -t $session
fi
fi
fi
# Colorize stderr in bold red. Very useful when looking for errors.
if [[ $LD_PRELOAD != *libcoloredstderr.so* ]]; then
# coloredstderr found, use it.
if [[ -f ~/.zsh/libcoloredstderr.so ]]; then
export LD_PRELOAD="$HOME/.zsh/libcoloredstderr.so:$LD_PRELOAD"
export COLORED_STDERR_FDS=2,
export COLORED_STDERR_PRE=$'\033[91m' # bright red
export COLORED_STDERR_IGNORED_BINARIES=/usr/bin/tset
# Use the fallback solution.
#
# Thanks to http://gentoo-wiki.com/wiki/Zsh for the basic script and
# Mikachu in #zsh on Freenode (2010-03-07 04:03 CET) for some improvements
# (-r, printf). It's not yet perfect and doesn't work with su and git for
# example, but it can handle most interactive output quite well (even with
# no trailing new line) and in cases it doesn't work, the E alias can be
# used as workaround.
#
# Moved in the "run commands" section to prevent one unnecessary zsh
# process when starting GNU screen/tmux (see above).
else
exec 2>>(while read -r -k -u 0 line; do
printf '\e[91m%s\e[0m' $line
print -n $'\0'
done &)
# Reset doesn't work with this hack.
reset() {
command reset "$@" 2>&1
}
fi
fi
# Display possible log messages from ~/.xinitrc (if `xmessage` wasn't
# installed). No race condition as xinitrc has finished before a shell is
# executed and only one shell is started on login.
if [[ -f ~/.xinitrc.errors ]]; then
echo "${fg_bold[red]}xinitrc failed!${fg_bold[default]}"
echo
cat ~/.xinitrc.errors
rm ~/.xinitrc.errors
echo
fi
# Run the following programs every 4 hours (and when zsh starts).
PERIOD=14400
periodic() {
# Display fortunes.
(( $+commands[fortune] )) && fortune -ac "${zshrc_fortune_arguments[@]}"
# Display reminders.
(( $+commands[rem] )) && [[ -f ~/.reminders ]] && rem -h
}
# RESTART SETTINGS
zmodload -F zsh/stat b:zstat
# Remember startup time. Used to perform automatic restarts when ~/.zshrc is
# modified.
zshrc_startup_time=$EPOCHSECONDS
# Automatically restart Zsh if ~/.zshrc was modified.
zshrc_restart_precmd() {
local stat
if ! zstat -A stat +mtime ~/.zshrc; then
return
fi
# ~/.zshrc wasn't modified, nothing to do.
if [[ $stat -le $zshrc_startup_time ]]; then
return
fi
local startup
strftime -s startup '%Y-%m-%d %H:%M:%S' $zshrc_startup_time
echo -n "${fg[magenta]}"
echo -n "~/.zshrc modified since startup ($startup) ... "
echo -n "${fg[default]}"
if [[ -n $zshrc_disable_restart ]]; then
echo 'automatic restart disabled.'
return
fi
# Don't exec if we have background processes because execing will let us
# lose control over them.
if [[ ${#${(k)jobstates}} -ne 0 ]]; then
echo 'active background jobs!'
return
fi
# Try to start a new interactive shell. If it fails, something is wrong.
# Don't kill our current session by execing it, abort instead.
zsh -i -c 'exit 42'
if [[ $? -ne 42 ]]; then
echo -n ${fg_bold[red]}
echo 'failed to start new zsh!'
echo -n ${fg_bold[default]}
return
fi
echo 'restarting zsh.'
echo
exec zsh
}
precmd_functions+=(zshrc_restart_precmd)
# RELOAD SETTINGS
zshenv_reload_time=0 # load before first command
zshenv_boot_time=$(date -d "$(uptime -s)" '+%s') # uptime in epoch seconds
# Automatically source ~/.zsh/env.update when the file changes (and exists).
# Can be used e.g. to update SSH_AGENT_PID and GPG_AGENT_INFO variables in
# running zsh processes. Sourced immediately before executing shell commands
# (preexec) to ensure the environment is always up to date.
zshenv_reload_preexec() {
local file
file=~/.zsh/env.update
local stat
if ! zstat -A stat +mtime $file 2>/dev/null; then
return
fi
# File was modified before reboot. Skip it to prevent loading of old
# values.
if [[ $stat -lt $zshenv_boot_time ]]; then
return
fi
# File wasn't modified, nothing to do.
if [[ $stat -le $zshenv_reload_time ]]; then
return
fi
zshenv_reload_time=$EPOCHSECONDS
unsetopt warn_create_global
. $file
setopt warn_create_global
}
preexec_functions+=(zshenv_reload_preexec)
# vim: ft=zsh