- ...
- select mode (optional, URL mode is used on startup):
- f: file paths
+ - i: IPs
- u: URLs
+ - c: checksums (e.g. MD5, SHA1, ..)
- ...
- /: search mode
- for `normal' modes:
entered number.
Press return before entering a number to select the last (lowest numbered)
-match (underlined by default). To abort without selecting any match either use
-"q".
+match (underlined by default). To abort without selecting any match use "q".
To change the selection mode (e.g. paths, files, etc.) use one of the mappings
explained below. Per default URLs are selected, see options for a way to
$fh = undef; # a failed open still writes a value to $fh
return;
}
+ $fh->autoflush(1);
}
foreach (@args) {
$_ = $self->encode($_);
}
- say $fh "$module: @args";
+ say $fh "$module: @args" or CORE::die $!;
return;
}
sub run_command {
- my ($screen, $config, $cmd) = @_;
+ my ($screen, $cmd) = @_;
$screen->debug('run_command', "running @{$cmd}");
# closes the window (because the parent process has exited).
local $SIG{HUP} = 'IGNORE';
- # Necessary for GNU screen or it'll keep the window open until the
- # paste command has run.
- close STDIN or die $!;
- close STDOUT or die $!;
- close STDERR or die $!;
+ # Necessary for GNU screen or it'll keep the window open until an
+ # external command has run.
+ require File::Spec;
+ my $devnull = File::Spec->devnull();
+ open STDIN, '<', $devnull or die $!;
+ open STDOUT, '>', $devnull or die $!;
+ open STDERR, '>', $devnull or die $!;
# Double-fork to prevent zombies.
my $pid = fork;
$number = int($number / 10);
} elsif ($char eq "\n"
or $char eq $config->{setting}{alternative_return}) {
- if ($number == 0) { # number without selection matches last entry
- $number = 1;
- }
last;
# Selecting a new mode requires falling through into the main input
return { key => $char };
# All other mappings stay in the current mode.
} elsif (defined (my $m = $config->{mapping}{simple}{$char})) {
- $m->($char, $screen, $config, $input);
+ my $result = $m->($char, $screen, $config, $input);
+ last if defined $result->{select_match};
next;
} else {
$screen->draw_matches($config, $matches, \@remaining);
$screen->refresh;
}
+ # Number without selection matches last entry.
+ if ($number == 0) {
+ $number = 1;
+ }
$screen->draw_matches($config, $matches, []); # remove matches
return {};
}
+sub mapping_paste_now {
+ my ($key, $screen, $config, $input) = @_;
+
+ $screen->debug('mapping_paste_now', 'started');
+
+ $config->{state}{handler} = $config->{handler}{paste};
+
+ return {
+ select_match => 1,
+ };
+}
+
sub mapping_yank {
my ($key, $screen, $config, $input) = @_;
return {};
}
+sub mapping_yank_now {
+ my ($key, $screen, $config, $input) = @_;
+
+ $screen->debug('mapping_yank_now', 'started');
+
+ $config->{state}{handler} = $config->{handler}{yank};
+
+ return {
+ select_match => 1,
+ };
+}
=head2 NORMAL MODES
=over 4
-=item B<path mode> select relative/absolute paths
+=item B<path mode> select relative/absolute paths
+
+=item B<url mode> select URLs
+
+=item B<ip mode> select IPv4 and IPv6 addresses
-=item B<url mode> select URLs
+=item B<checksum mode> select checksums (MD5, SHA1, SHA256, SHA512)
=back
return {
select => 'path select',
matches => \@matches,
- handler => $config->{handler}{yank},
+ handler => $config->{handler}{path},
};
}
sub mapping_mode_url {
handler => $config->{handler}{url},
};
}
+sub mapping_mode_ip {
+ my ($key, $screen, $config, $input) = @_;
+
+ $screen->debug('mapping_mode_ip', 'started');
+
+ my @ipv4 = get_regex_matches($input, $config->{regex}{ipv4});
+ my @ipv6 = get_regex_matches($input, $config->{regex}{ipv6});
+ return {
+ select => 'ip select',
+ matches => [@ipv4, @ipv6],
+ handler => $config->{handler}{ip},
+ };
+}
+sub mapping_mode_checksum {
+ my ($key, $screen, $config, $input) = @_;
+
+ $screen->debug('mapping_mode_checksum', 'started');
+
+ my @matches = get_regex_matches($input, $config->{regex}{checksum});
+ return {
+ select => 'checksum select',
+ matches => \@matches,
+ handler => $config->{handler}{checksum},
+ };
+}
=head2 SEARCH MODE (AND EXTEND MODE)
$screen->cursor(0);
+ $screen->prompt(name => undef, value => undef); # clear prompt
+ $screen->draw_prompt($config);
+
+ $screen->debug('mapping_mode_search', 'done');
+
return {
select => 'search',
matches => \@last_matches,
# Use a temporary file to prevent leaking the yanked data to other users
# with the command line, e.g. ps aux or top.
my ($fh, $tmp) = File::Temp::tempfile(); # dies on its own
- print $fh $screen->encode($match->{value});
+ print $fh $screen->encode($match->{value}) or die $!;
close $fh or die $!;
if ($config->{setting}{multiplexer} eq 'screen') {
# GNU screen displays an annoying "Slurping X characters into buffer".
# Use 'msgwait 0' as a hack to disable it.
my $msgwait = $config->{setting}{screen_msgwait};
- run_command($screen, $config, ['screen', '-X', 'msgwait', 0]);
- run_command($screen, $config, ['screen', '-X', 'readbuf', $tmp]);
- run_command($screen, $config, ['screen', '-X', 'msgwait', $msgwait]);
+ run_command($screen, ['screen', '-X', 'msgwait', 0]);
+ run_command($screen, ['screen', '-X', 'readbuf', $tmp]);
+ run_command($screen, ['screen', '-X', 'msgwait', $msgwait]);
} elsif ($config->{setting}{multiplexer} eq 'tmux') {
$screen->debug('handler_yank', 'using tmux');
- run_command($screen, $config, ['tmux', 'load-buffer', $tmp]);
+ run_command($screen, ['tmux', 'load-buffer', $tmp]);
} else {
die 'unsupported multiplexer';
}
unlink $tmp or die $!;
+
+ if ($config->{setting}{yank_x11}) {
+ $screen->debug('handler_yank', 'setting X11 selection');
+
+ my @xsel_cmd = qw( xsel --input --primary );
+ my @xclip_cmd = qw( xclip -in -selection primary );
+
+ my $fh;
+ {
+ # We don't care if a program doesn't exist.
+ no warnings;
+
+ if (not open $fh, '|-', @xsel_cmd) {
+ if (not open $fh, '|-', @xclip_cmd) {
+ die "install xsel or xlip to yank to X11 selection\n";
+ }
+ }
+ }
+ print $fh $match->{value} or die $!;
+ close $fh or die $!;
+ }
+
return;
}
sub handler_paste {
# Sleep until we switch back to the current window.
Time::HiRes::usleep($config->{setting}{paste_sleep});
- run_command($screen, $config, \@cmd);
+ run_command($screen, \@cmd);
});
return;
}
run_in_background($screen, sub {
my @cmd = ( @{$config->{setting}{browser}}, $match->{value} );
- run_command($screen, $config, \@cmd);
+ run_command($screen, \@cmd);
});
return;
}
# Draw matches in blue.
$config{attribute}{match_string} = color_pair(COLOR_BLUE, -1);
- # Enable Vim-like 'smartcase', ignore case until an upper character is
+ # Draw numbers in bold yellow.
+ $config{attribute}{match_id} = color_pair(COLOR_YELLOW, -1)
+ | A_BOLD;
+ # Disable Vim-like 'smartcase', ignore case until an upper character is
# searched.
- $config{setting}{smartcase} = 1;
+ $config{setting}{smartcase} = 0;
# Use chromium to open URLs if running under X, elinks otherwise.
if (defined $ENV{DISPLAY}) {
$config{setting}{browser} = ['chromium'];
} else {
- $config{setting}{browser} = ['elinks'];
+ $config{setting}{browser} = ['elinks', '-remote'];
}
# Let fcscs know the file was loaded successfully.
I<NOTE>: Mappings are split in two categories: Mode mappings which change the
selection and may receive additional input (e.g. a search string) and simple
-mappings which only change some value. Mode mappings are configured via
+mappings which only change some config value. Mode mappings are configured via
C<$config{mapping}{mode}>, simple mappings via C<$config{mapping}{simple}>.
The following mode mappings are available by default (the function to remap
=item B<u> select URLs (C<\&mapping_mode_url>)
+=item B<i> select IPv4 and IPv6 addresses (C<\&mapping_mode_ip>)
+
+=item B<c> select checksums (e.g. MD5, SHA) (C<\&mapping_mode_checksum>)
+
=item B</> search for regex to get selection (C<\&mapping_mode_search>)
=item B<q> quit fcscs (C<\&mapping_quit>)
=item B<p> enable pasting (C<\&mapping_paste>)
+=item B<P> paste current selection (like C<\n> but paste) (C<\&mapping_paste_now>)
+
=item B<y> enable yanking (copying) (C<\&mapping_yank>)
+=item B<Y> yank current selection (like C<\n> but yank) (C<\&mapping_yank_now>)
+
=back
+Note that yanking only uses the GNU screen or Tmux paste buffer by default. To
+also copy to X11 selection, enable the B<yank_x11> option.
+
The following additional mappings are available by default:
=over
my %mapping_mode = (
f => \&mapping_mode_path,
u => \&mapping_mode_url,
+ i => \&mapping_mode_ip,
+ c => \&mapping_mode_checksum,
'/' => \&mapping_mode_search,
q => \&mapping_quit,
);
my %mapping_simple = (
p => \&mapping_paste,
+ P => \&mapping_paste_now,
y => \&mapping_yank,
+ Y => \&mapping_yank_now,
);
=head2 ATTRIBUTES
=over
-=item B<debug> enable debug mode, writes to I<~/.config/fcscs/log> (C<0>)
+=item B<debug> enable debug mode, writes to I<~/.config/fcscs/log> (C<0>)
-=item B<initial_mode> start in this mode, must be a valid mode mapping (C<\&mapping_mode_url>)
+=item B<initial_mode> start in this mode, must be a valid mode mapping (C<\&mapping_mode_url>)
-=item B<multiplexer> set multiplexer ("screen" or "tmux") if not autodetected (C<undef>)
+=item B<multiplexer> set multiplexer ("screen" or "tmux") if not autodetected (C<undef>)
-=item B<ignorecase> ignore case when searching (C<0>)
+=item B<ignorecase> ignore case when searching (C<0>)
-=item B<smartcase> ignore case unless one uppercase character is searched (C<1>)
+=item B<smartcase> ignore case unless one uppercase character is searched (C<1>)
-=item B<paste_sleep> sleep x us before running paste command (C<100_000>)
+=item B<yank_x11> copy selection also to X11 primary selection when yanking (C<0>)
-=item B<screen_msgwait> GNU Screen's msgwait variable, used when yanking (C<5>)
+=item B<paste_sleep> sleep x us before running paste command (C<100_000>)
+
+=item B<screen_msgwait> GNU Screen's msgwait variable, used when yanking (C<5>)
=item B<alternative_return> additional accept key like return, set to C<\n> to disable (C<s>)
-=item B<browser> browser command as array reference (C<['x-www-browser']>)
+=item B<browser> browser command as array reference (C<['x-www-browser']>)
=back
=cut
my %setting = (
# options
- debug => 0,
- initial_mode => \&mapping_mode_url,
- multiplexer => undef,
- ignorecase => 0,
- smartcase => 1,
- paste_sleep => 100_000,
- screen_msgwait => 5,
+ debug => 0,
+ initial_mode => \&mapping_mode_url,
+ multiplexer => undef,
+ ignorecase => 0,
+ smartcase => 1,
+ yank_x11 => 0,
+ paste_sleep => 100_000,
+ screen_msgwait => 5,
# global mappings
alternative_return => 's',
# commands
- browser => ['x-www-browser'],
+ browser => ['x-www-browser'],
);
=head2 REGEXPS
=over
-=item B<url> used by C<\&mapping_mode_url()>
+=item B<url> used by C<\&mapping_mode_url>
+
+=item B<path> used by C<\&mapping_mode_path>
-=item B<path> used by C<\&mapping_mode_path()>
+=item B<ipv4> used by C<\&mapping_mode_ip>
+
+=item B<ipv6> used by C<\&mapping_mode_ip>
=back
# Taken from urlview's default configuration file, thanks.
url => qr{((?:(?:(?:http|https|ftp|gopher)|mailto):(?://)?[^ <>"\t]*|(?:www|ftp)[0-9]?\.[-a-z0-9.]+)[^ .,;\t\n\r<">\):]?[^, <>"\t]*[^ .,;\t\n\r<">\):])},
path => qr{(~?[a-zA-Z0-9_./-]*/[a-zA-Z0-9_./-]+)},
+ # IP addresses with optional prefix. Not perfectly accurate but good
+ # enough.
+ ipv4 => qr!\b(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}(?:/\d{1,2})?)\b!,
+ ipv6 => qr!\b((?:[0-9a-fA-F]{1,4})?(?::+[0-9a-fA-F]{1,4})+(?:/\d{1,3})?)\b!,
+ # MD5, SHA1, SHA256, SHA512
+ checksum => qr!\b([0-9a-fA-F]{32}|[0-9a-fA-F]{40}|[0-9a-fA-F]{64}|[0-9a-fA-F]{128})\b!,
);
=head2 HANDLERS
=over
-=item B<yank> used to yank (copy) selection to paste buffer (C<\&handler_yank>)
+=item B<yank> used to yank (copy) selection to paste buffer (C<\&handler_yank>)
+
+=item B<paste> used to paste selection into window (C<\&handler_paste>)
+
+=item B<path> used to handle paths (C<\&handler_yank>)
-=item B<paste> used to paste selection into window (C<\&handler_paste>)
+=item B<url> used to open URLs (e.g. in a browser) (C<\&handler_url>)
-=item B<url> used to open URLs (e.g. in a browser) (C<\&handler_url>)
+=item B<ip> used to handle IPs (C<\&handler_yank>)
+
+=item B<checksum> used to handle checksums (C<\&handler_yank>)
=back
if ($match->{value} =~ m{^https://www.youtube.com/}) {
return run_in_background($screen, sub {
- run_command($screen, $config,
- ['youtube-dl-wrapper', $match->{value}]);
+ run_command($screen, ['youtube-dl-wrapper', $match->{value}]);
});
}
handler_url(@_);
=cut
my %handler = (
- yank => \&handler_yank,
- paste => \&handler_paste,
- url => \&handler_url,
+ yank => \&handler_yank,
+ paste => \&handler_paste,
+ path => \&handler_yank,
+ url => \&handler_url,
+ ip => \&handler_yank,
+ checksum => \&handler_yank,
);
my %state = (
mapping_mode_path()
mapping_mode_url()
+ mapping_mode_ip()
+ mapping_mode_checksum()
mapping_mode_search()
mapping_paste()
+ mapping_paste_now()
mapping_yank()
+ mapping_yank_now()
mapping_quit()
Used as mappings, see L</MAPPINGS> above.
Used as handler to yank, paste selection or open URL in browser.
- debug()
get_regex_matches()
select_match()
run_command()
Example:
- TODO
+ # Enhance URL mode by updating the mapping.
+ $config{mapping}{mode}{u} = sub {
+ my ($key, $screen, $config, $input) = @_;
+
+ # First get matches of normal URL mode.
+ my $result = mapping_mode_url(@_);
+
+ # Add all strings matching "CVE-1234-1234" with URLs pointing to the
+ # Debian security tracker. "->{value}" is the string which is used as
+ # result of the match (e.g. the URL in this case).
+ my @matches = get_regex_matches($input, qr/\b(CVE-\d+-\d+)\b/);
+ foreach (@matches) {
+ $_->{value} = "https://security-tracker.debian.org/$_->{string}";
+ }
+ push @{$result->{matches}}, @matches;
+
+ # Change all YouTube links to use the custom "youtube" handler (see
+ # below). This will allow us to automatically open YouTube URLs with a
+ # custom program, like `youtube-dl` or `mpv`.
+ foreach (@{$result->{matches}}) {
+ if ($_->{string} =~ m{^https://www.youtube.com/}) {
+ $_->{handler} = $config{handler}{youtube};
+ }
+ }
+
+ return $result;
+ };
+ # Also update initial mode to use our new "URL mode".
+ $config{setting}{initial_mode} = $config{mapping}{mode}{u};
+
+ # Special handler to download YouTube URLs with `youtube-dl`. You could
+ # also use `mpv` here to immediately play them.
+ $config{handler}{youtube} = sub {
+ my ($screen, $config, $match) = @_;
+
+ return run_in_background($screen, sub {
+ run_command($screen, ['youtube-dl', $match->{value}]);
+ });
+ };
+
+
=cut
sub mapping_mode_path { return main::mapping_mode_path(@_); }
sub mapping_mode_url { return main::mapping_mode_url(@_); }
+ sub mapping_mode_ip { return main::mapping_mode_ip(@_); }
+ sub mapping_mode_checksum { return main::mapping_mode_checksum(@_); }
sub mapping_mode_search { return main::mapping_mode_search(@_); }
sub mapping_paste { return main::mapping_paste(@_); }
+ sub mapping_paste_now { return main::mapping_paste_now(@_); }
sub mapping_yank { return main::mapping_yank(@_); }
+ sub mapping_yank_now { return main::mapping_yank_now(@_); }
sub mapping_quit { return main::mapping_quit(@_); }
sub handler_yank { return main::handler_yank(@_); }
sub handler_paste { return main::handler_paste(@_); }
sub handler_url { return main::handler_url(@_); }
- sub debug { return main::debug(@_); }
-
sub get_regex_matches { return main::get_regex_matches(@_); }
sub select_match { return main::select_match(@_); }
}
# Make sure the file is not writable by other users. Doesn't handle
# ACLs and see comment above about race conditions.
- my @stat = stat $path or die $!;
+ my @stat = stat $path or $screen->die("Config '$decoded': $!");
my $mode = $stat[2];
if (($mode & Fcntl::S_IWGRP) or ($mode & Fcntl::S_IWOTH)) {
- die "Config '$decoded' must not be writable by other users.";
+ $screen->die("Config '$decoded' must not be writable by other users.");
}
my $result = do $path;
ruderich.org/simon / fcscs / fcscs.git / blobdiff