entered number.
Press return before entering a number to select the last (lowest numbered)
-match. To abort without selecting any match either use "q".
+match (underlined by default). To abort without selecting any match use "q".
To change the selection mode (e.g. paths, files, etc.) use one of the mappings
explained below. Per default URLs are selected, see options for a way to
my $attr_id = $config->{attribute}{match_id};
my $attr_string = $config->{attribute}{match_string};
+ my $attr_last = $config->{attribute}{match_last};
foreach (@{$matches_add}) {
- $self->draw($_->{y}, $_->{x}, $attr_string, $_->{string});
+ my $attr = (defined $_->{id} and $_->{id} == 1)
+ ? $attr_last
+ : $attr_string;
+ $self->draw($_->{y}, $_->{x}, $attr, $_->{string});
if (defined $_->{id}) {
$self->draw($_->{y}, $_->{x}, $attr_id, $_->{id});
}
# closes the window (because the parent process has exited).
local $SIG{HUP} = 'IGNORE';
- # Necessary for GNU screen or it'll keep the window open until the
- # paste command has run.
+ # Necessary for GNU screen or it'll keep the window open until an
+ # external command has run.
close STDIN or die $!;
close STDOUT or die $!;
close STDERR or die $!;
$number = $number * 10 + $char;
} elsif ($char eq "\b" or $char eq "\x7f") { # backspace
$number = int($number / 10);
- } elsif ($char eq "\n") {
+ } elsif ($char eq "\n"
+ or $char eq $config->{setting}{alternative_return}) {
if ($number == 0) { # number without selection matches last entry
$number = 1;
}
$screen->debug('extend_match', 'started');
+ return if not defined $match;
+
$screen->prompt(name => 'extend', value => undef);
$screen->draw_prompt($config);
my $match_old = \%{$match};
my $char = $screen->getch;
- if ($char eq "\n") { # accept match
- last;
+ if ($char eq "\n"
+ or $char eq $config->{setting}{alternative_return}) {
+ last; # accept match
} elsif ($char eq 'w') { # select current word (both directions)
extend_match_regex_left($line, $match, qr/\w+/);
} elsif ($char eq 'E') { # select current WORD (only right)
extend_match_regex_right($line, $match, qr/\S+/);
- } elsif ($char eq '^') { # select to beginning of line
+ } elsif ($char eq '0') { # select to beginning of line
extend_match_regex_left($line, $match, qr/.+/);
} elsif ($char eq '$') { # select to end of line
extend_match_regex_right($line, $match, qr/.+/);
=item B<url mode> select URLs
+=item B<ip mode> select IPv4 and IPv6 addresses
+
=back
=cut
handler => $config->{handler}{url},
};
}
+sub mapping_mode_ip {
+ my ($key, $screen, $config, $input) = @_;
+
+ $screen->debug('mapping_mode_ip', 'started');
+
+ my @ipv4 = get_regex_matches($input, $config->{regex}{ipv4});
+ my @ipv6 = get_regex_matches($input, $config->{regex}{ipv6});
+ return {
+ select => 'ip select',
+ matches => [@ipv4, @ipv6],
+ handler => $config->{handler}{ip},
+ };
+}
=head2 SEARCH MODE (AND EXTEND MODE)
=item B<E> extend WORD to the right
-=item B<^> extend to beginning of line
+=item B<0> extend to beginning of line
=item B<$> extend to end of line
$screen->cursor(0);
+ $screen->prompt(name => undef, value => undef); # clear prompt
+ $screen->draw_prompt($config);
+
+ $screen->debug('mapping_mode_search', 'done');
+
return {
select => 'search',
matches => \@last_matches,
=item B<u> select URLs (C<\&mapping_mode_url>)
+=item B<i> select IPv4 and IPv6 addresses (C<\&mapping_mode_ip>)
+
=item B</> search for regex to get selection (C<\&mapping_mode_search>)
=item B<q> quit fcscs (C<\&mapping_quit>)
=back
+The following additional mappings are available by default:
+
+=over
+
+=item B<\n> accept current selection (not customizable)
+
+=item B<s> additional key to accept selection (B<alternative_return> option)
+
+=back
+
All (single-byte) keys except numbers, backspace and return can be mapped.
Unknown mappings are ignored when pressing keys.
my %mapping_mode = (
f => \&mapping_mode_path,
u => \&mapping_mode_url,
+ i => \&mapping_mode_ip,
'/' => \&mapping_mode_search,
q => \&mapping_quit,
);
=item B<match_string> attribute for matches (yellow, default, normal)
+=item B<match_last> attribute for the match selected by return (yellow, default, underline)
+
=item B<prompt_name> attribute for prompt name (standout)
=item B<prompt_flags> attribute for prompt flags (standout)
match_id => $screen->color_pair(Curses::COLOR_RED, -1)
| Curses::A_BOLD,
match_string => $screen->color_pair(Curses::COLOR_YELLOW, -1),
+ match_last => $screen->color_pair(Curses::COLOR_YELLOW, -1)
+ | Curses::A_UNDERLINE,
prompt_name => Curses::A_STANDOUT,
prompt_flags => Curses::A_STANDOUT,
);
=over
-=item B<debug> enable debug mode, writes to I<~/.config/fcscs/log> (C<0>)
+=item B<debug> enable debug mode, writes to I<~/.config/fcscs/log> (C<0>)
+
+=item B<initial_mode> start in this mode, must be a valid mode mapping (C<\&mapping_mode_url>)
-=item B<initial_mode> start in this mode, must be a valid mode mapping (C<\&mapping_mode_url>)
+=item B<multiplexer> set multiplexer ("screen" or "tmux") if not autodetected (C<undef>)
-=item B<multiplexer> set multiplexer ("screen" or "tmux") if not autodetected (C<undef>)
+=item B<ignorecase> ignore case when searching (C<0>)
-=item B<ignorecase> ignore case when searching (C<0>)
+=item B<smartcase> ignore case unless one uppercase character is searched (C<1>)
-=item B<smartcase> ignore case unless one uppercase character is searched (C<1>)
+=item B<paste_sleep> sleep x us before running paste command (C<100_000>)
-=item B<paste_sleep> sleep x us before running paste command (C<100_000>)
+=item B<screen_msgwait> GNU Screen's msgwait variable, used when yanking (C<5>)
-=item B<screen_msgwait> GNU Screen's msgwait variable, used when yanking (C<5>)
+=item B<alternative_return> additional accept key like return, set to C<\n> to disable (C<s>)
-=item B<browser> browser command as array reference (C<['x-www-browser']>)
+=item B<browser> browser command as array reference (C<['x-www-browser']>)
=back
=cut
my %setting = (
# options
- debug => 0,
- initial_mode => \&mapping_mode_url,
- multiplexer => undef,
- ignorecase => 0,
- smartcase => 1,
- paste_sleep => 100_000,
- screen_msgwait => 5,
+ debug => 0,
+ initial_mode => \&mapping_mode_url,
+ multiplexer => undef,
+ ignorecase => 0,
+ smartcase => 1,
+ paste_sleep => 100_000,
+ screen_msgwait => 5,
+ # global mappings
+ alternative_return => 's',
# commands
- browser => ['x-www-browser'],
+ browser => ['x-www-browser'],
);
=head2 REGEXPS
=over
-=item B<url> used by C<\&mapping_mode_url()>
+=item B<url> used by C<\&mapping_mode_url>
-=item B<path> used by C<\&mapping_mode_path()>
+=item B<path> used by C<\&mapping_mode_path>
+
+=item B<ipv4> used by C<\&mapping_mode_ip>
+
+=item B<ipv6> used by C<\&mapping_mode_ip>
=back
# Taken from urlview's default configuration file, thanks.
url => qr{((?:(?:(?:http|https|ftp|gopher)|mailto):(?://)?[^ <>"\t]*|(?:www|ftp)[0-9]?\.[-a-z0-9.]+)[^ .,;\t\n\r<">\):]?[^, <>"\t]*[^ .,;\t\n\r<">\):])},
path => qr{(~?[a-zA-Z0-9_./-]*/[a-zA-Z0-9_./-]+)},
+ # IP addresses with optional prefix. Not perfectly accurate but good
+ # enough.
+ ipv4 => qr!\b(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}(?:/\d{1,2})?)\b!,
+ ipv6 => qr!\b((?:[0-9a-fA-F]{1,4})?(?::+[0-9a-fA-F]{1,4})+(?:/\d{1,3})?)\b!,
);
=head2 HANDLERS
=item B<url> used to open URLs (e.g. in a browser) (C<\&handler_url>)
+=item B<ip> used to handle IPs (C<\&handler_yank>)
+
=back
Example:
yank => \&handler_yank,
paste => \&handler_paste,
url => \&handler_url,
+ ip => \&handler_yank,
);
my %state = (
mapping_mode_path()
mapping_mode_url()
+ mapping_mode_ip()
mapping_mode_search()
mapping_paste()
sub mapping_mode_path { return main::mapping_mode_path(@_); }
sub mapping_mode_url { return main::mapping_mode_url(@_); }
+ sub mapping_mode_ip { return main::mapping_mode_ip(@_); }
sub mapping_mode_search { return main::mapping_mode_search(@_); }
sub mapping_paste { return main::mapping_paste(@_); }
$screen->debug('input', 'selecting match');
my $tmp = $result;
$result = select_match($result->{select},
- $screen, \%config, $input,
- $result->{matches});
+ $screen, \%config, $input,
+ $result->{matches});
$result->{handler} = $tmp->{handler};
$result->{extend} = $tmp->{extend};
goto RESULT; # reprocess special entries in result
ruderich.org/simon / fcscs / fcscs.git / blobdiff