X-Git-Url: https://ruderich.org/simon/gitweb/?p=fcscs%2Ffcscs.git;a=blobdiff_plain;f=bin%2Ffcscs;h=f561af237ce9ec8dc77289268ed18288e0ae4e7c;hp=7543a9df7807c10ed3a89dda3a89f714f8b9e0f9;hb=0596655830c92bc9590ed4746f13f806e4f0d674;hpb=37b381833bdc7b8479c61d1dffe5947f6c666532

diff --git a/bin/fcscs b/bin/fcscs
index 7543a9d..f561af2 100755
--- a/bin/fcscs
+++ b/bin/fcscs
@@ -54,6 +54,28 @@ None so far.
 
 =head1 USAGE
 
+Short overview of the general usage, details below:
+
+    - start fcscs
+    - configure actions (optional)
+        - enable pasting
+        - ...
+    - select mode (optional, URL mode is used on startup):
+        - f: file paths
+        - u: URLs
+        - ...
+        - /: search mode
+    - for `normal' modes:
+        - select match by displayed number or <return> for lowest numbered
+          match
+        - configured action is run, e.g. URL is opened with browser
+    - for `search' mode:
+        - perform incremental search
+        - on <return> go to `normal' mode to select a match
+        - after the match is selected wait for confirmation or extension
+        - confirmation: <return> run previously selected action
+        - extension: change match, e.g. select complete word or line
+
 GNU Screen setup (add to F<~/.screenrc>):
 
     bind ^B eval "hardcopy $HOME/.tmp/screen-fcscs" "screen fcscs $HOME/.tmp/screen-fcscs"
@@ -97,6 +119,9 @@ and please report the bug:
 
     fcscs /path/to/screen-or-tmux-fcscs-file
 
+
+=head1 MODES
+
 =cut
 
 
@@ -401,7 +426,7 @@ sub get_regex_matches {
 
         my ($x, $y) = input_match_offset_to_coordinates($input->{width},
                                                         $offset);
-        push @matches, { x => $x, y => $y, string => $1 };
+        push @matches, { x => $x, y => $y, offset => $offset, string => $1 };
     }
     return @matches;
 }
@@ -543,6 +568,8 @@ sub select_match {
         $screen->refresh;
     }
 
+    $screen->draw_matches($config, $matches, []); # remove matches
+
     foreach (@{$matches}) {
         return { match => $_ } if $_->{id} == $number;
     }
@@ -550,6 +577,86 @@ sub select_match {
     return { match => undef };
 }
 
+sub extend_match_regex_left {
+    my ($line, $match, $regex) = @_;
+
+    my $s = reverse substr $line, 0, $match->{x};
+    if ($s =~ /^($regex)/) {
+        $match->{string}  = reverse($1) . $match->{string};
+        $match->{x}      -= length $1;
+        $match->{offset} -= length $1;
+    }
+    return;
+}
+sub extend_match_regex_right {
+    my ($line, $match, $regex) = @_;
+
+    my $s = substr $line, $match->{x} + length $match->{string};
+    if ($s =~ /^($regex)/) {
+        $match->{string} .= $1;
+    }
+    return;
+}
+sub extend_match {
+    my ($screen, $config, $input, $match) = @_;
+
+    debug $config, 'extend_match', 'started';
+
+    $screen->prompt(name => 'extend', value => undef);
+    $screen->draw_prompt($config);
+
+    delete $match->{id}; # don't draw any match ids
+    $screen->draw_matches($config, [], [$match]);
+    $screen->refresh;
+
+    my $line = $input->{lines}[$match->{y}];
+
+    while (1) {
+        my $match_old = \%{$match};
+
+        my $char = $screen->getch;
+        if ($char eq "\n") { # accept match
+            last;
+
+        } elsif ($char eq 'w') { # select current word (both directions)
+            extend_match_regex_left($line,  $match, qr/\w+/);
+            extend_match_regex_right($line, $match, qr/\w+/);
+        } elsif ($char eq 'b') { # select current word (only left)
+            extend_match_regex_left($line,  $match, qr/\w+/);
+        } elsif ($char eq 'e') { # select current word (only right)
+            extend_match_regex_right($line, $match, qr/\w+/);
+
+        } elsif ($char eq 'W') { # select current WORD (both directions)
+            extend_match_regex_left($line,  $match, qr/\S+/);
+            extend_match_regex_right($line, $match, qr/\S+/);
+        } elsif ($char eq 'B') { # select current WORD (only left)
+            extend_match_regex_left($line,  $match, qr/\S+/);
+        } elsif ($char eq 'E') { # select current WORD (only right)
+            extend_match_regex_right($line, $match, qr/\S+/);
+
+        } elsif ($char eq '^') { # select to beginning of line
+            extend_match_regex_left($line, $match, qr/.+/);
+        } elsif ($char eq '$') { # select to end of line
+            extend_match_regex_right($line, $match, qr/.+/);
+
+        # Allow mode changes if not overwritten by local mappings.
+        } elsif (defined $config->{mapping}{mode}{$char}) {
+            $screen->draw_matches($config, [$match_old], []); # clear match
+            return { key => $char };
+
+        } else {
+            next; # ignore unknown mappings
+        }
+
+        $screen->draw_matches($config, [$match_old], [$match]);
+        $screen->refresh;
+    }
+
+    debug $config, 'extend_match', 'done';
+
+    return { match => $match };
+}
+
 
 sub mapping_paste {
     my ($key, $screen, $config, $input) = @_;
@@ -579,6 +686,22 @@ sub mapping_yank {
 }
 
 
+=head2 NORMAL MODES
+
+Normal modes select matches by calling a function which returns them, e.g. by
+using a regex.
+
+The following normal modes are available:
+
+=over 4
+
+=item B<path mode> select relative/absolute paths
+
+=item B<url mode>  select URLs
+
+=back
+
+=cut
 sub mapping_mode_path {
     my ($key, $screen, $config, $input) = @_;
 
@@ -604,6 +727,40 @@ sub mapping_mode_url {
     };
 }
 
+=head2 SEARCH MODE (AND EXTEND MODE)
+
+Search mode is a special mode which lets you type a search string (a Perl
+regex) and then select one of the matches. Afterwards you can extend the
+match. For example select the complete word or to the end of the line. This
+allows quick selection of arbitrary text.
+
+The following mappings are available during the extension mode (not
+configurable at the moment):
+
+=over 4
+
+=item B<w> select current word
+
+=item B<b> extend word to the left
+
+=item B<e> extend word to the right
+
+=item B<W> select current WORD
+
+=item B<B> extend WORD to the left
+
+=item B<E> extend WORD to the right
+
+=item B<^> extend to beginning of line
+
+=item B<$> extend to end of line
+
+=back
+
+C<word> includes any characters matching C<\w+>, C<WORD> any non-whitespace
+characters (C<\S+>), just like in Vim.
+
+=cut
 sub mapping_mode_search {
     my ($key, $screen, $config, $input) = @_;
 
@@ -659,6 +816,7 @@ sub mapping_mode_search {
     return {
         select  => 'search',
         matches => \@last_matches,
+        extend  => 1,
         handler => $config->{handler}{yank},
     };
 }
@@ -1214,6 +1372,13 @@ RESULT:
                                 $screen, \%config, $input,
                                 $result->{matches});
             $result->{handler} = $tmp->{handler};
+            $result->{extend}  = $tmp->{extend};
+            goto RESULT; # reprocess special entries in result
+        }
+        if (defined $result->{extend}) {
+            debug \%config, 'input', 'extending match';
+            $result = extend_match($screen, \%config, $input,
+                                   $result->{match});
             goto RESULT; # reprocess special entries in result
         }
         if (defined $result->{match}) {