X-Git-Url: https://ruderich.org/simon/gitweb/?p=nsscash%2Fnsscash.git;a=blobdiff_plain;f=README.adoc;h=181d18d1302e11726d5115b142083333e62dcbf2;hp=d2578ae76376364f3e85fb26d17e6878269fc0a0;hb=HEAD;hpb=c43a74c01d838cef9dfe4aadbff54c03df8f1f1d diff --git a/README.adoc b/README.adoc index d2578ae..181d18d 100644 --- a/README.adoc +++ b/README.adoc @@ -6,7 +6,7 @@ without having to rely on a (single) stable server. Traditional systems like LDAP or NIS require a stable server or users/groups cannot be resolved. By distributing the data to all systems, temporary outages of the server cause no issues on the clients. In addition the local storage is much faster than -remote network access. To update the local caches polling via HTTP is +remote network access. To update the local caches polling via HTTP/HTTPS is performed, for example every minute, only downloading new data if anything has changed. @@ -17,7 +17,11 @@ C, which provides integration via `/etc/nsswitch.conf`. It's specifically designed to be very simple and uses the data prepared by `nsscash` for lookups. To support quick lookups, in O(log n), the files utilize indices. +Nsscash can also be used separately from the NSS module to deploy arbitrary +files to many hosts and keep them up-to-date. + Nsscash is very careful when deploying the changes: + - All files are updated using the standard "write to temporary file", "sync", "rename" steps which is atomic on UNIX file systems. The indices are stored in the same file preventing stale data during the update. @@ -34,8 +38,11 @@ Nsscash is very careful when deploying the changes: - To prevent misconfigurations, empty files (no users/groups) are not permitted and will not be written to disk. This is designed to prevent the accidental loss of all users/groups on a system. +- To detect file corruption a hash of all deployed files is stored separately + and verified on each `nsscash` run. The passwd/group files have the following size restrictions: + - maximum number of entries: '2^64-1' (uint64_t) - maximum passwd entry size: 65543 bytes (including newline) - maximum group entry size: 65535 bytes (including newline, only one member) @@ -44,10 +51,16 @@ The passwd/group files have the following size restrictions: - `nsscash` checks for these restrictions and aborts with an error if they are violated -nsscash has an extensive test suite for both the Go and C part testing general -requirements and various corner cases. +Nsscash has an extensive test suite for both the Go and C part testing general +requirements and various corner cases. See TODO.adoc for a list of known +issues and possible improvements. -nsscash is licensed under AGPL version 3 or later. +Nsscash was created as replacement for nsscache [1] because nsscache has very +complex code, especially the parts written in C, uses multiple files for data +and indices and has had severe bugs (including temporary loss of all users and +race conditions when updating data and index files). + +Nsscash is licensed under AGPL version 3 or later. [1] https://github.com/google/nsscache @@ -55,12 +68,15 @@ nsscash is licensed under AGPL version 3 or later. == REQUIREMENTS - Go, for `nsscash` - - github.com/pkg/errors - - github.com/BurntSushi/toml + * github.com/BurntSushi/toml + * github.com/google/renameio + * github.com/pkg/errors - C compiler, for `libnss_cash.so.2` - HTTP(S) server to provide the passwd/group/etc. files +- NSS module is only supported on Little-endian systems (for now) + Tested on Debian Buster, but should work on any GNU/Linux system. With adaptations to the NSS module it should work on any UNIX-like system which uses NSS. @@ -141,14 +157,14 @@ The following global keys are available: forced. Each `file` block describes a single file to download/write. The following -keys are available: +keys are available (all keys are required unless marked as optional): - `type`: Type of this file; can be either `passwd` (for files in `/etc/passwd` format), `group` (for files in `/etc/group` format), or `plain` (arbitrary format). Only `passwd` and `group` files are supported by the nsscash NSS module. But, as explained above, `plain` can be used to distribute arbitrary files. The type is required as the `.nsscash` files are - pre processed for faster lookups and simpler C code which requires a known + preprocessed for faster lookups and simpler C code which requires a known format. - `url`: URL to fetch the file from; HTTP and HTTPS are supported @@ -159,7 +175,7 @@ keys are available: - `username`/`password`: Username and password sent via HTTP Basic-Auth to the webserver. The configuration file must not be readable by other users when - this is used. (optional) + this key is used. (optional) - `path`: Path to store the retrieved file @@ -173,7 +189,7 @@ Written by Simon Ruderich . This program is licensed under AGPL version 3 or later. -Copyright (C) 2019 Simon Ruderich +Copyright (C) 2019-2021 Simon Ruderich This program is free software: you can redistribute it and/or modify it under the terms of the GNU Affero General Public License as published by