1 " Vim main configuration file.
3 " Copyright (C) 2008-2013 Simon Ruderich
5 " This file is free software: you can redistribute it and/or modify
6 " it under the terms of the GNU General Public License as published by
7 " the Free Software Foundation, either version 3 of the License, or
8 " (at your option) any later version.
10 " This file is distributed in the hope that it will be useful,
11 " but WITHOUT ANY WARRANTY; without even the implied warranty of
12 " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 " GNU General Public License for more details.
15 " You should have received a copy of the GNU General Public License
16 " along with this file. If not, see <http://www.gnu.org/licenses/>.
21 " Save 'runtimepath' in case it was changed by the system's configuration
22 " files. Also save 'diff' as set all& resets it; but somehow later (after
23 " sourcing the vimrc - for example in a VimEnter autocmd) it gets
24 " automagically restored to the correct value. Not sure what exactly Vim is
27 let s:save_runtimepath = &runtimepath
28 let s:save_diff = &diff
30 " Reset all options (except 'term', 'lines' and 'columns'). This makes sure a
31 " system wide configuration file doesn't change default values.
33 " And restore it after all other options were reset.
35 let &runtimepath = s:save_runtimepath
36 let &diff = s:save_diff
37 unlet s:save_runtimepath
41 " Make sure Vim (and not Vi) settings are used.
44 " Disallow :autocmd, shell and write commands in .vimrc and .exrc files in the
45 " current directory. Only used if 'exrc' is enabled (off by default),
46 " precaution just in case somebody enables 'exrc'.
49 " Use UTF-8 for all internal data (buffers, registers, etc.). This doesn't
50 " affect reading files in different encodings, see 'fileencodings' for that.
53 " Load my scripts from ~/.vim (my scripts) and ~/.vim/runtime (checkout of Vim
54 " runtime files) if available.
55 set runtimepath-=~/.vim
56 set runtimepath^=~/.vim,~/.vim/runtime
58 " Don't store swap files in the same directory as the edited file, but only if
59 " we have a "safe" writable directory available.
60 if filewritable('~/.tmp') == 2 || filewritable('~/tmp') == 2
63 " But store them in ~/.tmp or ~/tmp (already set by default) if available.
65 " Never use /tmp which gets cleaned on reboot.
68 " Disable modelines as they may cause security problems. Instead use
69 " securemodelines (Vim script #1876).
72 " Complete to longest common string (list:longest) and then complete all full
73 " matches after another (full). Thanks to pbrisbin
74 " (http://pbrisbin.com:8080/dotfiles/vimrc).
75 set wildmode=list:longest,full
76 " Ignore case when completing files/directories.
77 if exists('+wildignorecase')
81 " Ignore files with the following extensions because I almost never want to
82 " edit them in Vim (specifying them manually still works of course).
85 set wildignore+=*.o,*.d,*.so
87 set wildignore+=*.class
89 set wildignore+=*.aux,*.log,*.out,*.toc,*.pdf
93 " Show completion menu even if only one entry matches.
94 if exists('+completeopt')
95 set completeopt+=menuone
98 " Increase history of executed commands (:) and search patterns (/).
101 " Increase number of possible undos.
104 " Remember marks (including the last cursor position) for more files. ^= is
105 " necessary because 'viminfo' is parsed from the beginning and the first match
111 " Use strong encryption if possible, also used for swap/undo files.
112 if exists('+cryptmethod')
113 set cryptmethod=blowfish
116 " Clear all vimrc-related autocmds. Has to be done here as the vimrc augroup
117 " is used multiple times. Necessary to support reloading the vimrc.
128 " Check if the given syntax group is available. Thanks to bairui in #vim on
129 " Freenode (2012-02-19 01:15 CET) for the try/catch silent highlight idea.
130 function! s:HasSyntaxGroup(group)
132 execute 'silent highlight ' . a:group
134 catch /^Vim\%((\a\+)\)\=:E411/ " 'highlight group not found'
140 " Check if the given Vim version and patch is available.
141 function! s:HasVersionAndPatch(version, patch)
142 return v:version > a:version
143 \ || (v:version == a:version && has('patch' . a:patch))
150 " Also enable fast terminal mode in GNU screen and tmux, but not for SSH
152 if &term =~# '^screen' && !exists('$SSH_CONNECTION')
159 " Enable automatic file detection, plugin and indention support.
161 filetype off " necessary for pathogen to force a reload of ftplugins
162 filetype plugin indent on
165 " Use UTF-8 file encoding for all files. Automatically recognize latin1 in
167 set fileencodings=utf-8,latin1
169 " Always use unix line-endings for new files. DOS line endings in existing
170 " files are recognized.
171 set fileformats=unix,dos
173 " Wrap text after 78 characters.
176 " Set tabs to 4 spaces, use softtabs.
180 " When < and > is used indent/deindent to the next 'shiftwidth' boundary.
182 " Use the default value for real tabs.
185 " Enable auto indention.
188 " When joining lines only add one space after a sentence.
191 " Allow backspacing over autoindent and line breaks.
192 set backspace=indent,eol
194 " Start a comment when hitting enter after a commented line (r) and when using
195 " o or O around a commented line (o).
196 set formatoptions+=ro
197 " Don't break a line if was already longer then 'textwidth' when insert mode
200 " Remove comment leader when joining lines where it makes sense.
201 if s:HasVersionAndPatch(703, 541)
205 " Allow virtual editing (cursor can be positioned anywhere, even when there is
206 " no character) in visual block mode.
207 set virtualedit=block
209 " Already display matches while typing the search command. This makes spotting
210 " typos easy and searching faster.
213 " Activate syntax folding.
215 set foldmethod=syntax
216 " Only use fold column if we have enough space (for example not in a
217 " (virtual) terminal which has only 80 columns).
221 set foldlevel=99 " no closed folds at default, 'foldenable' would disable
222 " folding which is not what I want
223 " Don't open folds for block movements like '(', '{', '[[', '[{', etc.
227 " Only check case if the searched word contains a capital character.
231 " Activate spell checking, use English as default.
232 if exists('+spell') && has('syntax')
233 " But not when diffing because spell checking is distracting in this case.
240 " Allow buffers with changes to be hidden. Very important for efficient
241 " editing with multiple buffers. Prevents the "E37: No write since last change
242 " (add ! to override)" warning when switching modified buffers.
245 " When splitting vertically put the new window right of the current one.
253 " Use a dark background. Doesn't change the background color, only sets text
254 " colors for a dark terminal.
257 " Use my color scheme if 256 colors are available.
258 if &t_Co == 256 || has('gui_running')
262 " Display line numbers.
264 " But use as little space as possible for the numbers column. Thanks to James
265 " Vega (http://git.jamessan.com/?p=etc/vim.git;a=summary).
266 if exists('+numberwidth')
269 " Display the ruler with current line/file position. If 'statusline' is used,
270 " then this only affects <C-G>.
272 " Display partial commands in the status line.
275 " Don't redraw screen when executing macros; increases speed. Thanks to James
276 " Vega (http://git.jamessan.com/?p=etc/vim.git;a=summary).
279 " Visualize the line the cursor is currently in.
280 if exists('+cursorline')
284 " Highlight all matches on the screen when searching. Use <C-L> (see below) to
285 " remove the highlighting until the next search.
288 " Display some special characters.
291 " Display tabs as ">--------".
292 set listchars+=tab:>-
293 " Display trailing whitespace as "-".
294 set listchars+=trail:-
295 " Display markers for long lines when wrapping is disabled.
296 set listchars+=extends:>,precedes:<
297 " Display non-breakable space as "!".
299 set listchars+=nbsp:!
302 " Don't draw the vertical split separator by using space as character. Thanks
303 " to scp1 in #vim on Freenode (2012-06-16 16:12 CEST) for the idea to use a
304 " non-breakable space. But a simple space works as well, as long as the
305 " current color scheme is not reset.
306 if has('windows') && has('folding')
307 set fillchars+=vert:\ " comment to prevent trailing whitespace
311 " Always display the status line even if there is only one window.
314 " If there's more than one buffer return "/<nr>" (e.g. "/05") where <nr>
315 " is the highest buffer number, otherwise return nothing. Used in
316 " 'statusline' to get an overview of available buffer numbers.
317 function! s:StatuslineBufferCount()
318 let l:bufnr = bufnr('$')
322 let l:result .= printf('%02d', l:bufnr)
324 " Older Vims don't have printf() (and no .= either). Emulate
327 let l:result = l:result . '0'
329 let l:result = l:result . l:bufnr
337 " Like %f but use relative filename if it's shorter than the absolute path
338 " (e.g. '../../file' vs. '~/long/path/to/file'). fnamemodify()'s ':.' is
339 " not enough because it doesn't create '../'s.
340 function! s:StatuslineRelativeFilename()
341 " Display only filename for help files.
342 if &buftype == 'help'
345 " Special case for scratch files.
346 if &buftype == 'nofile'
350 let l:path = expand('%')
355 " Path is already relative, nothing to do.
356 if stridx(l:path, '/') != 0
360 " Absolute path to this file.
361 let l:path = expand('%:p')
362 " Shortened path to this file, thanks to bairui in #vim on Freenode
363 " (2012-06-23 00:54) for the tip to use fnamemodify(). This is what
364 " Vim normally uses as %f (minus some exceptions).
365 let l:original_path = fnamemodify(l:path, ':~')
366 " Absolute path to the current working directory.
369 " Working directory completely contained in path, replace it with a
370 " relative path. Happens for example when opening a file with netrw.
371 " %f displays this as absolute path, but we want a relative path of
373 if stridx(l:path, l:cwd) == 0
374 return strpart(l:path, strlen(l:cwd) + 1)
377 let l:path_list = split(l:path, '/')
378 let l:cwd_list = split(l:cwd, '/')
380 " Remove the common path.
381 while l:path_list[0] == l:cwd_list[0]
382 call remove(l:path_list, 0)
383 call remove(l:cwd_list, 0)
386 " Add as many '..' as necessary for the relative path and join the
387 " path. Thanks to Raimondi in #vim on Freenode (2012-06-23 01:13) for
388 " the hint to use repeat() instead of a loop.
389 let l:path = repeat('../', len(l:cwd_list)) . join(l:path_list, '/')
391 " Use the shorter path, either relative or absolute.
392 if strlen(l:path) < strlen(l:original_path)
395 return l:original_path
399 " Display unexpected 'fileformat', 'fileencoding' and 'bomb' settings.
400 function! s:StatuslineFileFormat()
401 if &fileformat != 'unix'
402 return '[' . &fileformat . ']'
407 function! s:StatuslineFileEncoding()
408 if &fileencoding != '' && &fileencoding != 'utf-8'
409 \ && &filetype != 'help'
410 return '[' . &fileencoding . ']'
415 function! s:StatuslineFileBOMB()
416 if exists('+bomb') && &bomb
423 " Return current syntax group in brackets or nothing if there's none.
424 function! s:StatuslineSyntaxGroup()
425 let l:group = synIDattr(synID(line('.'), col('.'), 1), 'name')
427 return '[' . l:group . '] '
433 " Short function names to make 'statusline' more readable.
435 return s:StatuslineBufferCount()
438 return s:StatuslineRelativeFilename()
441 return s:StatuslineFileFormat()
444 return s:StatuslineFileEncoding()
447 return s:StatuslineFileBOMB()
450 return s:StatuslineSyntaxGroup()
455 set statusline+=%02n " buffer number
456 set statusline+=%{SBC()} " highest buffer number
458 if has('modify_fname') && v:version >= 700 " some functions need 7.0
459 set statusline+=%{SRF()} " path to current file
461 set statusline+=%f " path to current file in buffer
463 set statusline+=\ " space after path
464 set statusline+=%h " [help] if buffer is help file
465 set statusline+=%w " [Preview] if buffer is preview buffer
466 set statusline+=%m " [+] if buffer was modified,
467 " [-] if 'modifiable' is off
468 set statusline+=%r " [RO] if buffer is read only
469 if v:version >= 700 " %#..# needs 7.0
470 set statusline+=%#Error# " display warnings
471 set statusline+=%{SFF()} " - unexpected file format
472 set statusline+=%{SFE()} " - unexpected file encoding
473 set statusline+=%{SFB()} " - unexpected file byte order mask
474 set statusline+=%## " continue with normal colors
478 set statusline+=%= " right align
479 set statusline+=0x%-8B\ " current character under cursor as hex
480 set statusline+=%-12.(%l,%c%V%)\ " line number (%l),
481 " column number (%c),
482 " virtual column number if different
484 set statusline+=%P " position in file in percent
488 " MAPPINGS (except for plugins, see PLUGIN SETTINGS below)
490 " noremap is used to make sure the right side is executed as is and can't be
491 " modified by a plugin or other settings. Except for <Nop> which isn't
492 " affected by mappings.
494 " Easy way to exit insert mode (jj is too slow).
496 " Also for command mode, thanks to http://github.com/mitechie/pyvim
499 " And fix my typos ...
507 " Disable arrow keys for all modes except command modes. Thanks to James Vega
508 " (http://git.jamessan.com/?p=etc/vim.git;a=summary).
517 " Also disable arrow keys in command mode, use <C-P>/<C-N> as replacement (see
524 " Use <C-P>/<C-N> as replacement for <Up>/<Down> in command mode. Thanks to
525 " abstrakt and grayw in #vim on Freenode (2010-04-12 21:20 CEST).
527 cnoremap <C-N> <Down>
530 " Don't move the cursor to the first column for certain scroll commands (<C-F,
531 " <C-B>, <C-D>, <C-U>). Thanks to jamessan in #vim on Freenode (2011-08-31
532 " 02:27 CEST) for the 'nostartofline' tip. But I can't use 'nostartofline'
533 " directly because it also enables that feature for other commands which I
536 " Set 'nostartofline' for a single movement.
537 function! s:TemporaryNostartofline(movement)
538 let l:startofline = &startofline
540 execute 'normal! ' . a:movement
541 let &startofline = l:startofline
544 " Thanks to fow in #vim on Freenode (2012-02-16 15:38 CET) for the idea to
545 " use "<Bslash><Lt>"; Vim documentation reference: :help <>.
546 nnoremap <silent> <C-F>
547 \ :call <SID>TemporaryNostartofline("<Bslash><Lt>C-F>")<CR>
548 nnoremap <silent> <C-B>
549 \ :call <SID>TemporaryNostartofline("<Bslash><Lt>C-B>")<CR>
550 nnoremap <silent> <C-D>
551 \ :call <SID>TemporaryNostartofline("<Bslash><Lt>C-D>")<CR>
552 nnoremap <silent> <C-U>
553 \ :call <SID>TemporaryNostartofline("<Bslash><Lt>C-U>")<CR>
556 " Let Y yank to the end of the line, similar to D and C. Use yy if you want to
557 " yank a line. This fixes a weird inconsistency in Vi(m).
560 " Write before suspending, thanks to deryni in #vim on Freenode (2011-05-09
561 " 20:02 CEST). To suspend without saving either unmap this or use :stop<CR>.
562 " Only the current buffer is written, thus switching to another buffer works
564 nnoremap <silent> <C-Z> :update<CR>:stop<CR>
566 " 2<C-G> gives more verbose information, use it by default. Thanks to NCS_One
567 " in #vim on Freenode (2011-08-15 00:17 CEST).
568 nnoremap <C-G> 2<C-G>
570 " Use <Space> to move down a page and - to move up one like in mutt. Don't use
571 " nnoremap so the <C-F>/<C-B> 'nostartofline' fix (see above) works.
575 " Go to next and previous buffer. Thanks to elik in #vim on Freenode
576 " (2010-05-16 18:38 CEST) for this idea.
577 nnoremap <silent> gb :bnext<CR>
578 nnoremap <silent> gB :bprevious<CR>
580 " But when starting again at the first buffer, print a warning which
581 " reminds me that I've already seen that buffer.
582 function! s:NextBuffer()
583 " Are we currently on the last buffer and moving to the first?
584 let l:last_buffer = 0
585 if bufnr('%') == bufnr('$') && bufnr('$') > 1
586 let l:last_buffer = 1
589 " Go to the next buffer.
593 " Go to the first buffer, silent is necessary or the following message
594 " won't be displayed because it's overwritten by the status message
595 " displayed when entering a buffer.
600 echo 'Starting again at first buffer.'
604 nnoremap <silent> gb :call <SID>NextBuffer()<CR>
607 " Fast access to buffers.
608 nnoremap <silent> <Leader>1 :1buffer<CR>
609 nnoremap <silent> <Leader>2 :2buffer<CR>
610 nnoremap <silent> <Leader>3 :3buffer<CR>
611 nnoremap <silent> <Leader>4 :4buffer<CR>
612 nnoremap <silent> <Leader>5 :5buffer<CR>
613 nnoremap <silent> <Leader>6 :6buffer<CR>
614 nnoremap <silent> <Leader>7 :7buffer<CR>
615 nnoremap <silent> <Leader>8 :8buffer<CR>
616 nnoremap <silent> <Leader>9 :9buffer<CR>
617 nnoremap <silent> <Leader>0 :10buffer<CR>
619 " Use real tabs instead of soft tabs.
621 " Switch from soft tabs to real tabs.
622 function! s:UseTabs()
623 setlocal noexpandtab shiftwidth=8 softtabstop=8
625 nnoremap <silent> <Leader>t :call <SID>UseTabs()<CR>
627 " Enable "verbatim" mode. Used to view files with long lines or without syntax
628 " coloring. 'list' is not changed, see next mapping.
629 nnoremap <silent> <Leader>v :setlocal nowrap nospell synmaxcol=0<CR>
632 nnoremap <silent> <Leader>l :set invlist<CR>
634 " Make last active window the only window. Similar to <C-W> o.
635 nnoremap <C-W>O <C-W>p<C-W>o
637 " Maps to change spell language between English and German and disable spell
640 nnoremap <silent> <Leader>sn :set nospell<CR>
641 nnoremap <silent> <Leader>se :set spell spelllang=en_us<CR>
642 nnoremap <silent> <Leader>sd :set spell spelllang=de_de<CR>
643 " If no spell support is available, these mappings do nothing.
645 nmap <Leader>sn <Nop>
646 nmap <Leader>se <Nop>
647 nmap <Leader>sd <Nop>
651 " * and # for selections in visual mode. Thanks to
652 " http://got-ravings.blogspot.com/2008/07/vim-pr0n-visual-search-mappings.html
653 " and all nerds involved (godlygeek, strull in #vim on Freenode).
654 function! s:VSetSearch()
655 let l:temp = @@ " unnamed register
657 " Added \C to force 'noignorecase' while searching the current visual
658 " selection. I want to search for the exact string in this case.
659 let @/ = '\C' . '\V' . substitute(escape(@@, '\'), '\n', '\\n', 'g')
662 vnoremap * :<C-U>call <SID>VSetSearch()<CR>//<CR>
663 vnoremap # :<C-U>call <SID>VSetSearch()<CR>??<CR>
665 " Use 'noignorecase' for * and #. See comment in s:VSetSearch() for details.
666 " Thanks to the writers of s:VSetSearch(), see above.
667 function! s:NSetSearch()
668 let l:cword = expand('<cword>')
669 let l:regex = substitute(escape(l:cword, '\'), '\n', '\\n', 'g')
670 let @/ = '\C\V'. '\<' . l:regex . '\>'
672 nnoremap * :call <SID>NSetSearch()<CR>//<CR>
673 nnoremap # :call <SID>NSetSearch()<CR>??<CR>
676 " I often type "W" instead of "w" when trying to save a file. Fix my mistake.
677 " Thanks to Tony Mechelynck <antoine.mechelynck@gmail.com> from the Vim
678 " mailing list for the commands.
686 \ ((getcmdtype() == ':' && getcmdpos() <= 2) ? 'w' : 'W')
687 cnoreabbrev <expr> Wa
688 \ ((getcmdtype() == ':' && getcmdpos() <= 3) ? 'wa' : 'Wa')
689 cnoreabbrev <expr> Wq
690 \ ((getcmdtype() == ':' && getcmdpos() <= 3) ? 'wq' : 'Wq')
691 cnoreabbrev <expr> Wqa
692 \ ((getcmdtype() == ':' && getcmdpos() <= 4) ? 'wqa' : 'Wqa')
694 " Also fix my typo with "Q".
700 \ ((getcmdtype() == ':' && getcmdpos() <= 2) ? 'q' : 'Q')
701 cnoreabbrev <expr> Qa
702 \ ((getcmdtype() == ':' && getcmdpos() <= 3) ? 'qa' : 'Qa')
705 " In case 'hlsearch' is used disable it with <C-L>. Thanks to frogonwheels and
706 " vimgor (bot) in #vim on Freenode (2010-03-30 05:58 CEST).
707 nnoremap <silent> <C-L> :nohlsearch<CR><C-L>
709 " <C-U> in insert mode deletes a lot, break undo sequence before deleting the
710 " line so the change can be undone. Thanks to the vimrc_example.vim file in
712 inoremap <C-U> <C-G>u<C-U>
713 " Same for <C-@> (insert previously inserted text and leave insert mode).
714 inoremap <C-@> <C-G>u<C-@>
715 " And for <C-A> (insert previously inserted text).
716 inoremap <C-A> <C-G>u<C-A>
717 " And for <C-W> (delete word before cursor).
718 inoremap <C-W> <C-G>u<C-W>
721 " New text-objects ii and ai to work on text with the same indentation. Thanks
722 " to http://vim.wikia.com/index.php?title=Indent_text_object&oldid=27126
723 " (visited on 2011-11-19).
724 onoremap <silent> ai :<C-U>call <SID>IndTxtObj(0)<CR>
725 onoremap <silent> ii :<C-U>call <SID>IndTxtObj(1)<CR>
726 vnoremap <silent> ai :<C-U>call <SID>IndTxtObj(0)<CR><Esc>gv
727 vnoremap <silent> ii :<C-U>call <SID>IndTxtObj(1)<CR><Esc>gv
729 function! s:IndTxtObj(inner)
730 let curline = line(".")
731 let lastline = line("$")
732 let i = indent(line(".")) - &shiftwidth * (v:count1 - 1)
733 let i = i < 0 ? 0 : i
734 if getline(".") !~ "^\\s*$"
735 let p = line(".") - 1
736 let nextblank = getline(p) =~ "^\\s*$"
738 \ && ((i == 0 && !nextblank)
739 \ || (i > 0 && ((indent(p) >= i
740 \ && !(nextblank && a:inner))
741 \ || (nextblank && !a:inner))))
743 let p = line(".") - 1
744 let nextblank = getline(p) =~ "^\\s*$"
747 call cursor(curline, 0)
748 let p = line(".") + 1
749 let nextblank = getline(p) =~ "^\\s*$"
751 \ && ((i == 0 && !nextblank)
752 \ || (i > 0 && ((indent(p) >= i
753 \ && !(nextblank && a:inner))
754 \ || (nextblank && !a:inner))))
756 let p = line(".") + 1
757 let nextblank = getline(p) =~ "^\\s*$"
767 " Fix some of my spelling mistakes (German).
768 inoreabbrev relle reelle
769 inoreabbrev reele reelle
770 " Fix some of my spelling mistakes (English).
771 inoreabbrev completly completely
776 " Activate syntax coloring.
778 " But only if it wasn't already active. Prevents breaking the syntax
779 " coloring when reloading the vimrc. Thanks to johnLate for the idea.
780 if !exists('g:syntax_on')
784 " Don't highlight more than 500 columns as I normally don't have that long
785 " lines and they slow down syntax coloring. Thanks to Derek Wyatt
786 " (http://www.derekwyatt.org/vim/the-vimrc-file/).
787 if exists('+synmaxcol')
791 " Use (limited) syntax based omni completion if no other omni completion is
792 " available. Taken from :help ft-syntax-omni.
793 if has('autocmd') && exists('+omnifunc')
796 \ if &omnifunc == '' |
797 \ setlocal omnifunc=syntaxcomplete#Complete |
802 " Function to enable all custom highlights. Necessary as highlights are
803 " window-local and thus must be set for each new window.
804 function! s:CustomSyntaxHighlights()
805 " Not the first time called, nothing to do.
806 if exists('w:vimrc_syntax_run')
809 let w:vimrc_syntax_run = 1
811 " Highlight lines longer than 78 characters. Thanks to Tony Mechelynck
812 " <antoine.mechelynck@gmail.com> from the Vim mailing list. It can easily be
813 " disabled when necessary with :2match (in Vim >= 700).
814 if !&diff && exists(':2match')
815 " Use ColorColumn for overlong lines if available and my color
817 if &t_Co == 256 && s:HasSyntaxGroup('ColorColumn')
818 2match ColorColumn /\%>78v./
820 2match Todo /\%>78v./
826 if exists('*matchadd')
827 " Highlight some important keywords in all documents.
828 let l:todos = ['TODO', 'XXX', 'FIXME', 'NOTE',
829 \ 'CHANGED', 'REMOVED', 'DELETED']
830 " Compatibility fix for Vim 6.4 which can't parse for in functions
831 " (without function it's ignored).
832 execute ' for l:x in l:todos'
833 \ '| call matchadd("Todo", l:x)'
836 " Highlight Unicode whitespace which is no normal whitespace (0x20).
837 let l:spaces = ['00a0', '1680', '180e', '2000', '2001', '2002',
838 \ '2003', '2004', '2005', '2006', '2007', '2008',
839 \ '2009', '200a', '200b', '200c', '200d', '202f',
840 \ '205f', '2060', '3000', 'feff']
841 " Compatibility fix for Vim 6.4. Escape \ inside the " string or
843 execute ' for l:x in l:spaces'
844 \ '| call matchadd("Error", "\\%u" . l:x)'
847 " Special highlight for tabs to reduce their visibility in contrast to other
848 " SpecialKey characters (e.g. ^L).
849 if &t_Co == 256 && s:HasSyntaxGroup('specialKeyTab')
850 call matchadd('specialKeyTab', '\t')
854 " Enable highlights for the current and all new windows. Thanks to bairui in
855 " #vim on Freenode (2012-04-01 00:22 CEST) for the WinEnter suggestion.
856 call s:CustomSyntaxHighlights()
859 autocmd WinEnter * call s:CustomSyntaxHighlights()
863 " Settings for specific filetypes.
866 let g:c_no_if0_fold = 1 " fix weird double fold in #if0 in recent versions
868 let g:hs_highlight_delimiters = 1
869 let g:hs_highlight_boolean = 1
870 let g:hs_highlight_types = 1
871 let g:hs_highlight_more_types = 1
873 let g:java_highlight_java_lang_ids = 1 " color java.lang.* identifiers
876 let g:perl_fold_blocks = 1
877 let g:perl_nofold_packages = 1
878 let g:perl_include_pod = 1 " syntax coloring for PODs
880 let g:php_folding = 3 " fold functions
881 let g:php_short_tags = 0 " no short tags (<? .. ?>), not always usable
882 let g:php_sql_query = 1 " highlight SQL queries in strings
884 let g:python_highlight_all = 1
886 let g:sh_noisk = 1 " don't add . to 'iskeyword'
887 let g:sh_is_posix = 1 " POSIX shell (e.g. dash) is compatible enough
888 let g:sh_fold_enabled = 7 " functions (1), heredoc (2) and if/do/for (4)
890 let g:vimsyn_embed = 0 " don't highlight embedded languages
891 let g:vimsyn_folding = 'af' " folding for autogroups (a) and functions (f)
893 let g:xml_syntax_folding = 1
900 " Use pathogen which allows one 'runtimepath' entry per plugin. This makes
901 " installing/removing/updating plugins simple. (Used for plugins with more
902 " than one file.) Ignore errors in case pathogen is not installed.
904 silent! execute 'call pathogen#infect()'
907 " Settings for securemodelines.
908 " Only allow items I need (also includes spl which is not enabled by
910 if v:version >= 700 " need lists
911 let g:secure_modelines_allowed_items = ['ft', 'spl', 'fdm',
912 \ 'sw', 'sts', 'noet']
915 " Settings for the NERD commenter.
916 " Don't create any mappings I don't want to use.
917 let g:NERDCreateDefaultMappings = 0
918 " Map toggle comment.
919 nmap <Leader><Leader> <Plug>NERDCommenterToggle
921 " XPTemplate settings.
922 " Try to maintain snippet rendering even after editing outside of a
924 let g:xptemplate_strict = 0
925 " Don't complete any braces automatically.
926 let g:xptemplate_brace_complete = 0
927 " Only highlight the current placeholder.
928 let g:xptemplate_highlight = 'current'
931 " Don't manage the working directory (the default setting is too slow for
933 let g:ctrlp_working_path_mode = 0
935 " Path to cache directory. I prefer to keep generated files as local as
937 let g:ctrlp_cache_dir = $HOME . '/.vim/cache/ctrlp'
938 " Permanent cache, cleared by a crontab entry. Use <F5> to update the
940 let g:ctrlp_clear_cache_on_exit = 0
942 " Don't switch the window if the selected buffer is already open. I want
943 " to open another view on this buffer in most cases.
944 let g:ctrlp_switch_buffer = 0
947 " Defaults don't work well for my projects.
949 autocmd BufEnter *.cc let b:fswitchdst = 'h'
950 \ | let b:fswitchlocs = './'
951 autocmd BufEnter *.h let b:fswitchdst = 'cc,c'
952 \ | let b:fswitchlocs = './'
955 " Switch to corresponding header/source file.
956 nnoremap <silent> <Leader>h :FSHere<CR>
959 " Don't create ~/.vim/.netrwhist history file.
960 let g:netrw_dirhistmax = 0
966 " Use a custom auto group to prevent problems when the vimrc files is sourced
971 " Go to last position of opened files. Taken from :help last-position-jump.
972 autocmd BufReadPost *
973 \ if line("'\"") > 1 && line("'\"") <= line('$') |
974 \ execute "normal! g'\"" |
976 " But not for Git commits, go to beginning of the file.
977 autocmd BufReadPost COMMIT_EDITMSG normal! gg
979 " Make sure 'list' and 'number' is disabled in help files. This is necessary
980 " when switching to a help buffer which is in the background with :buffer as
981 " these options are local to windows (and not only to buffers). This happens
982 " because I often want to use only one window and thus the help buffer is in
984 autocmd BufWinEnter *.txt
985 \ if &filetype == 'help' |
987 \ setlocal nonumber |
990 " Automatically disable 'paste' mode when leaving insert mode. Thanks to
991 " Raimondi in #vim on Freenode (2010-08-14 23:01 CEST). Very useful as I only
992 " want to paste once and then 'paste' gets automatically unset. InsertLeave
993 " doesn't exist in older Vims. Use "*p to paste X11's selection, no need for
994 " 'paste' in this case.
995 if exists('##InsertLeave')
996 autocmd InsertLeave * set nopaste
999 " Write all files when running :mak[e] before 'makeprg' is called.
1000 " QuickFixCmdPre doesn't exist in older Vims.
1001 if exists('##QuickFixCmdPre')
1002 autocmd QuickFixCmdPre * wall
1005 " Don't ignore case while in insert mode, but ignore case in all other modes.
1006 " This causes <C-N>/<C-P> to honor the case and thus only complete matching
1007 " capitalization. But while searching (/) 'ignorecase' is used.
1008 " InsertEnter/InsertLeave doesn't exist in older Vims.
1009 if exists('##InsertEnter') && exists('##InsertLeave')
1010 autocmd InsertEnter * set noignorecase
1011 autocmd InsertLeave * set ignorecase
1014 " Display a warning when editing a file which contains "do not edit" (ignoring
1015 " the case) and similar messages in the first lines of the file, for example
1016 " template files which were preprocessed or auto-generated files. Especially
1017 " useful when the header is not displayed on the first screen, e.g. when the
1018 " old position is restored.
1019 function! s:SearchForDoNotEditHeader()
1020 " Only search the first 20 lines to prevent false positives, e.g.
1021 " in scripts which write files containing this warning and ignore
1022 " the case (\c). (Can't use search()'s {stopline} as we might not
1023 " start searching from the top.)
1024 let l:search = '\c\(do not \(edit\|modify\)\|autogenerated by\)'
1025 let l:match = search(l:search, 'n')
1026 if l:match == 0 || l:match > 20
1030 echoerr 'Do not edit this file! (Maybe a template file.)'
1032 autocmd BufRead * call s:SearchForDoNotEditHeader()
1034 " AFTER/FTPLUGIN AUTO COMMANDS
1036 " Disable spell checking for files which don't need it.
1037 autocmd FileType deb setlocal nospell
1038 autocmd FileType diff setlocal nospell
1039 autocmd FileType tar setlocal nospell
1040 " Fix to allow Vim edit crontab files as crontab doesn't work with
1042 autocmd FileType crontab setlocal backupcopy=yes
1043 " Don't use the modeline in git commits as the diff created by `git commit -v`
1044 " may contain one which could change the filetype or other settings of the
1045 " commit buffer. Also make sure we use only 72 characters per line which is
1046 " the recommendation for git commit messages (http://tpope.net/node/106).
1047 autocmd FileType gitcommit let g:secure_modelines_allowed_items = [] |
1048 \ setlocal textwidth=72
1049 " Fix 'include' setting for shell files to recognize '.' and 'source'
1051 autocmd FileType sh let &l:include = '^\s*\(\.\|source\)\s\+'
1052 " Use the same comment string as for Vim files in Vimperator files.
1053 autocmd FileType vimperator setlocal commentstring=\"%s
1054 " Use TeX compiler for (La)TeX files.
1055 autocmd FileType tex compiler tex
1057 " FTDETECT AUTO COMMANDS
1059 " Recognize .md as markdown files (Vim default is .mkd).
1060 autocmd BufRead,BufNewFile *.md set filetype=mkd
1061 " Recognize .test as Tcl files.
1062 autocmd BufRead,BufNewFile *.test set filetype=tcl
1064 " OTHER AUTO COMMANDS
1066 " Disable spell checking, displaying of list characters and long lines when
1067 " viewing documentation.
1068 autocmd BufReadPost /usr/share/doc/* setlocal nospell nolist | 2match
1070 " Use diff filetype for mercurial patches in patch queue.
1071 autocmd BufReadPost */.hg/patches/* set filetype=diff
1077 " CUSTOM FUNCTIONS AND COMMANDS
1080 " Convenient command to see the difference between the current buffer and the
1081 " file it was loaded from, thus the changes you made. Thanks to the
1082 " vimrc_example.vim file in Vim's source. Modified to use the same filetype
1083 " for the diffed file as the filetype for the original file.
1084 if !exists(':DiffOrig')
1086 \ let s:diff_orig_filetype = &filetype
1088 \ | let &filetype = s:diff_orig_filetype
1089 \ | unlet s:diff_orig_filetype
1090 \ | set buftype=nofile