# Zsh configuration file.
+# Copyright (C) 2011-2012 Simon Ruderich
+#
+# This file is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This file is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this file. If not, see <http://www.gnu.org/licenses/>.
+
source_debug ". ~/.zsh/rc"
# arrays.
function precmd() {
for function in $precmd_functions; do
- $function $@
+ $function "$@"
done
}
function preexec() {
for function in $preexec_functions; do
- $function $@
+ $function "$@"
done
}
function chpwd() {
for function in $chpwd_functions; do
- $function $@
+ $function "$@"
done
}
fi
add-zsh-hook precmd prompt_precmd
-# When screen, xterm or rxvt is used set the name of the window to the
+# When screen, tmux, xterm or rxvt is used set the name of the window to the
# currently running program.
#
# When a program is started preexec() sets the window's name to it; when it
# stops precmd() resets the window's name to 'zsh'. 'fg' is supported and sets
# the window's name to the resumed job.
#
-# It works with screen, xterm and rxvt.
+# It works with screen, tmux, xterm and rxvt.
#
# If a command is run with sudo or if the shell is running as root then a ! is
# added at the beginning of the command to make this clear. If a command is
# running on a different computer with ssh a @ is added at the beginning. If
-# screen is running on the remote machine instead of @screen @:hostname
-# (hostname replaced by the machine's hostname) is displayed. This only works
-# if the .zshrc on the server also uses this command.
+# screen/tmux is running on the remote machine instead of @screen @:hostname
+# (or @tmux ..; hostname replaced by the machine's hostname) is displayed.
+# This only works if the .zshrc on the server also uses this command.
#
# screen* is necessary as `screen` uses screen.linux for example for a linux
# console.
# Replace fg with the resumed job name.
if [[ $program_name == fg ]]; then
program_name=${jobtexts[%+]}
- elif [[ $program_name == fg* ]]; then
+ elif [[ $program_name == fg\ * ]]; then
program_name=${jobtexts[${program_name#fg }]}
fi
# If screen is running in SSH then display "@:hostname" as title
# in the term/outer screen.
- if [[ $program_name == @screen ]]; then
+ if [[ $program_name == @screen || $program_name == @tmux ]]; then
program_name="@:${HOST//.*/}"
# Use "@:!hostname" for root screens.
- elif [[ $program_name == @!screen ]]; then
+ elif [[ $program_name == @!screen || $program_name == @!tmux ]]; then
program_name="@:!${HOST//.*/}"
fi
fi
window_reset=
}
- # Sets the window title. Works with screen, xterm and rxvt. (V) escapes
- # all non-printable characters. Thanks to Mikachu in #zsh on Freenode
- # (2010-08-07 17:09 CEST).
+ # Sets the window title. Works with screen, tmux (which uses screen as
+ # TERM), xterm and rxvt. (V) escapes all non-printable characters. Thanks
+ # to Mikachu in #zsh on Freenode (2010-08-07 17:09 CEST).
if [[ $TERM == screen* ]]; then
window_title() {
print -n "\ek${(V)1}\e\\"
zstyle ':completion:::::' completer \
_expand _complete _prefix _ignored _approximate
-# Try uppercase if the currently typed string doesn't match. This allows
-# typing in lowercase most of the time and completion fixes the case. Don't
-# perform these fixes in _approximate to prevent it from changing the input
-# too much. Thanks to the book "From Bash to Z Shell" page 249.
+# Match specification to be tried when completing items. Each group ('...') is
+# tried after another if no matches were found, once matches are found no
+# other groups are tried. Thanks to Mikachu in #zsh on Freenode (2012-08-28
+# 18:48 CEST) for explanations.
+#
+# When matching also include the uppercase variant of typed characters
+# ('m:{a-z}={A-Z}'); using '' before this group would try the unmodified match
+# first, but I prefer to get all matches immediately (e.g. if Makefile and
+# makefile exist in the current directory echo m<tab> matches both, with '' it
+# would only match makefile because it found one match). This allows typing in
+# lowercase most of the time and completion fixes the case, which is faster.
+#
+# Don't perform these fixes in _approximate to prevent it from changing the
+# input too much. Thanks to the book "From Bash to Z Shell" page 249.
zstyle ':completion:*:(^approximate):*' matcher-list 'm:{a-z}={A-Z}'
# Allow one mistake per three characters. Thanks to the book "From Bash to Z
# is no longer displayed. Display current position in percent (%p).
zstyle ':completion:*:default' list-prompt '%p'
# Display group name (%d) (like 'external command', 'alias', etc.), in bold.
-# Also display a message if _approximate found errors and if no matches were
+# Also display a message if _approximate found errors and no matches were
# found.
zstyle ':completion:*' format ' %B%d%b:'
zstyle ':completion:*:corrections' format ' %B%d%b (errors: %e)'
alias clear='clear; window_reset=yes; window_precmd reset'
fi
+
+# CUSTOM COMMANDS
+
# Display all branches (except stash) in gitk but only 200 commits as this is
-# much faster. Also put in the background and disown. Thanks to sitaram in
-# #git on Freenode (2009-04-20 15:51).
+# much faster. Also put in the background and disown. Thanks to drizzd in #git
+# on Freenode (2010-04-03 17:55 CEST).
gitk() {
- command gitk \
- --max-count=200 \
- $(git rev-parse --symbolic-full-name --remotes --branches) \
- $@ &
+ command gitk --max-count=200 --branches --remotes --tags "$@" &
disown %command
}
# Same for tig (except the disown part as it's no GUI program).
tig() {
- command tig \
- --max-count=200 \
- $(git rev-parse --symbolic-full-name --remotes --branches) \
- $@
+ command tig --max-count=200 --branches --remotes --tags "$@"
}
# Pipe output through less.
command tree -C "$@" | less
}
-# Automatically disown.
-xpdf() {
- command xpdf "$@" &
- disown %command
+# Choose the "best" PDF viewer available: zathura, then xpdf. Also setup
+# completion for `pdf`.
+if (( $+commands[zathura] )); then
+ pdf() {
+ command zathura "$@" 2>/dev/null &
+ disown %command
+ }
+ # No completion for zathura yet.
+ compdef _xpdf pdf
+elif (( $+commands[xpdf] )); then
+ pdf() {
+ command xpdf "$@" 2>/dev/null &
+ disown %command
+ }
+ compdef _xpdf pdf
+fi
+
+# GHCI doesn't use readline, force it if rlwrap is available.
+(( $+commands[rlwrap] )) && ghci() {
+ command rlwrap \
+ --always-readline --complete-filenames -t dumb \
+ --histsize 5000 \
+ --file ~/.shell/rlwrap/ghci \
+ ghci "$@" 2>&1
}
# LOAD ADDITIONAL CONFIGURATION FILES
+# Configuration option for rc.local to use tmux. By default screen is used.
+use_tmux=
+
source_config ~/.zsh/rc.local
# RUN COMMANDS
-# If not already in screen reattach to a running session or create a new one.
-# This also starts screen on a remote server when connecting through ssh.
-if [[ $TERM != dumb && $TERM != linux && -z $STY ]]; then
+# If not already in screen or tmux, reattach to a running session or create a
+# new one. This also starts screen/tmux on a remote server when connecting
+# through ssh.
+if [[ $TERM != dumb && $TERM != linux && -z $STY && -z $TMUX ]]; then
# Get running detached sessions.
- session=$(screen -list | grep 'Detached' | awk '{ print $1; exit }')
+ if [[ -z $use_tmux ]]; then
+ session=$(screen -list | grep 'Detached' | awk '{ print $1; exit }')
+ else
+ session=$(tmux list-sessions 2>/dev/null \
+ | sed '/(attached)$/ d; s/^\([0-9]\{1,\}\).*$/\1/; q')
+ fi
# As we exec later we have to set the title here.
- window_preexec "screen"
+ if [[ -z $use_tmux ]]; then
+ window_preexec "screen"
+ else
+ window_preexec "tmux"
+ fi
# Create a new session if none is running.
if [[ -z $session ]]; then
- exec screen
+ if [[ -z $use_tmux ]]; then
+ exec screen
+ else
+ exec tmux
+ fi
# Reattach to a running session.
else
- exec screen -r $session
+ if [[ -z $use_tmux ]]; then
+ exec screen -r $session
+ else
+ exec tmux attach-session -t $session
+ fi
fi
fi
# cases it doesn't work, the E alias can be used as workaround.
#
# Moved in the "run commands" section to prevent one unnecessary zsh process
-# when starting screen (see above).
+# when starting screen/tmux (see above).
exec 2>>(while read -r -k -u 0 line; do
printf '\e[91m%s\e[0m' "$line";
print -n $'\0';
# Run reminder and redisplay it every four hours (if it's available).
PERIOD=14400
periodic() {
- which rem > /dev/null && [ -f ~/.reminders ] && rem -h
+ (( $+commands[rem] )) && [ -f ~/.reminders ] && rem -h
}