X-Git-Url: https://ruderich.org/simon/gitweb/?a=blobdiff_plain;ds=inline;f=zsh%2Frc;h=ff59f86b59d30010062d43b6b720c847bda4c621;hb=843ce28bcb3395a862bdb8fef45203b284364e3c;hp=34c99556274dcb3543d72d76dbbf04d8fa7ae385;hpb=e4506773c2b11bde762743bde5cfb0b4cc429010;p=config%2Fdotfiles.git
diff --git a/zsh/rc b/zsh/rc
index 34c9955..ff59f86 100644
--- a/zsh/rc
+++ b/zsh/rc
@@ -1,15 +1,149 @@
# Zsh configuration file.
+# Copyright (C) 2011-2014 Simon Ruderich
+#
+# This file is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This file is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this file. If not, see .
+
+
+# Warn when creating global variables from inside a function. Needs to be set
+# before declaring a function.
+setopt warn_create_global
+
+
+# HELPER FUNCTIONS
+
+# Return the name of the program which is called in the foreground with `fg`.
+# $1 is the name of the program (optional). If it's not 'fg' or 'fg *' it's
+# returned unchanged.
+zshrc_resolve_fg_to_resumed_job_name() {
+ # $REPLY is used by convention for scalars ($reply for arrays) to return
+ # values from functions. unset it here to prevent problems when REPLY is
+ # bound to an integer or similar. Thanks to Mikachu in #zsh on Freenode
+ # (2012-09-27 17:14 CEST) for this hint.
+ unset REPLY
+
+ # Replace fg with the resumed job name.
+ if [[ $1 == fg ]]; then
+ REPLY=${jobtexts[%+]}
+ elif [[ $1 == fg\ * ]]; then
+ REPLY=${jobtexts[${1#fg }]}
+ # Normal program, return as is.
+ else
+ REPLY=$1
+ fi
+}
+
+
+# MISCELLANEOUS SETTINGS
+
+# Prevent warnings.
+typeset -g TMOUT
+# Load general shell setup commands. NOTE: Expand this when publishing the
+# config.
+source_config ~/.shell/rc
+
+# Disable beeps.
+setopt nobeep
+
+# Prevent overwriting existing files with '> filename', use '>| filename'
+# (or >!) instead.
+setopt noclobber
+
+# Entering the name of a directory (if it's not a command) will automatically
+# cd to that directory.
+setopt autocd
+
+# When entering a nonexistent command name automatically try to find a similar
+# one.
+setopt correct
+
+# Enable zsh's extended glob abilities.
+setopt extendedglob
+
+# Don't exit if is pressed. Prevents exiting the shell by accident (e.g.
+# pressing twice).
+setopt ignoreeof
+
+# Also display PID when suspending a process.
+setopt longlistjobs
+
+
+# KEY BINDINGS
+
+# Not all bindings are done here, only those not specific to a given section.
# Use Vi(m) style key bindings.
bindkey -v
-# Be paranoid, new files are readable/writable by me only.
-umask 077
+# Use jk to exit insert mode (jj is too slow to type).
+bindkey 'jk' vi-cmd-mode
+
+# I don't need the arrow keys, I use ^N and ^P for this (see below).
+bindkey -r '^[OA' '^[OB' '^[OC' '^[OD' '^[[A' '^[[B' '^[[C' '^[[D'
+# Also not in Vi mode.
+bindkey -a -r '^[OA' '^[OB' '^[OC' '^[OD' '^[[A' '^[[B' '^[[C' '^[[D'
+
+
+# FUNCTION SETTINGS
+
+# Make sure every entry in $fpath is unique.
+typeset -U fpath
+# ~/.zsh/functions/completion is a symbolic link to the Completion directory
+# of a Zsh Git checkout. Use it to get the newest completions if available.
+if [[ -d ~/.zsh/functions/completion ]]; then
+ fpath=(~/.zsh/functions/completion/*/*(/) $fpath)
+fi
+# Set correct fpath to allow loading my functions (including completion
+# functions).
+fpath=(~/.zsh/functions $fpath)
+# Autoload my functions (except completion functions and hidden files). Thanks
+# to caphuso from the Zsh example files for this idea.
+if [[ -d ~/.zsh/functions ]]; then
+ autoload -Uz ${fpath[1]}/^_*(^/:t)
+fi
+
+# Simulate hooks using _functions arrays for Zsh versions older than 4.3.4. At
+# the moment only precmd(), preexec() and chpwd() are simulated.
+if [[ $ZSH_VERSION != (4.3.<4->*|4.<4->*|<5->*) ]]; then
+ # Run all functions defined in the ${precmd,preexec,chpwd}_functions
+ # arrays.
+ function precmd() {
+ for function in $precmd_functions; do
+ $function "$@"
+ done
+ }
+ function preexec() {
+ for function in $preexec_functions; do
+ $function "$@"
+ done
+ }
+ function chpwd() {
+ for function in $chpwd_functions; do
+ $function "$@"
+ done
+ }
+fi
+
+# Load zmv (zsh move) which is a powerful file renamer.
+autoload -Uz zmv
+
+
+# HISTORY SETTINGS
# Use history and store it in ~/.zsh/history.
-HISTSIZE=1000
-SAVEHIST=1000
+HISTSIZE=1000000
+SAVEHIST=1000000
HISTFILE=~/.zsh/history
# Append to the history file instead of overwriting it and do it immediately
# when a command is executed.
@@ -17,123 +151,928 @@ setopt appendhistory
setopt incappendhistory
# If the same command is run multiple times store it only once in the history.
setopt histignoredups
-# Vim like completions of previous executed commands.
-bindkey "^P" history-beginning-search-backward
-bindkey "^N" history-beginning-search-forward
+# Don't add lines starting with a space to the history.
+setopt histignorespace
-# Prevent overwriting existing files with '> filename', use '>| filename'
-# (or >!) instead.
-setopt noclobber
+# Vim like completions of previous executed commands (also enter Vi-mode). If
+# called at the beginning it just recalls old commands (like cursor up), if
+# called after typing something, only lines starting with the typed text are
+# returned. Very useful to get old commands quickly - in addition to the
+# history commands (!..). Thanks to Mikachu in #zsh on Freenode (2010-01-17
+# 12:47 CET) for the information how to a use function with bindkey.
+zle -N zshrc-vi-history-beginning-search-backward
+zshrc-vi-history-beginning-search-backward() {
+ local not_at_beginning_of_line
+ if [[ $CURSOR -ne 0 ]]; then
+ not_at_beginning_of_line=yes
+ fi
-# Entering the name of a directory (if it's not a command) will automatically
-# cd to that directory.
-setopt autocd
+ zle history-beginning-search-backward
+
+ # Start Vi-mode and stay at the same position (Vi-mode moves one left,
+ # this counters it).
+ zle vi-cmd-mode
+ if [[ -n $not_at_beginning_of_line ]]; then
+ zle vi-forward-char
+ fi
+}
+bindkey '^P' zshrc-vi-history-beginning-search-backward
+bindkey -a '^P' history-beginning-search-backward # binding for Vi-mode
+# Here only Vi-mode is necessary as ^P enters Vi-mode and ^N only makes sense
+# after calling ^P.
+bindkey -a '^N' history-beginning-search-forward
+
+# Enable incremental search which is especially useful when the string is an
+# argument and not the command.
+bindkey '^R' history-incremental-pattern-search-backward
+# Also enable my usual use of Ctrl-P/Ctrl-N to get the previous/next matching
+# history entry.
+if [[ $ZSH_VERSION == (4.<4->*|<5->*) ]]; then
+ bindkey -M isearch '^P' history-incremental-pattern-search-backward
+ bindkey -M isearch '^N' history-incremental-pattern-search-forward
+fi
+
+# Automatically push cd-ed directories on the directory stack.
+setopt autopushd
+# Don't push duplicates on the directory stack.
+setopt pushdignoredups
+# Exchange the meaning of + and - when specifying a directory on the stack.
+# This way cd - lists the last used directory first, which is more
+# natural because cd - goes to the last directory.
+setopt pushdminus
-# When entering a nonexistent command name automatically try to find a similar
-# one.
-setopt correct
+
+# PROMPT SETTINGS
# Use colorized output, necessary for prompts and completions.
-autoload -U colors && colors
+autoload -Uz colors; colors
+
+# Necessary for $EPOCHSECONDS, the UNIX time.
+zmodload zsh/datetime
+
+# Some shortcuts for colors. The %{...%} tells zsh that the data in between
+# doesn't need any space, necessary for correct prompt drawing. Use %F{color}
+# in more recent zsh versions (here compatibility is important).
+local red="%{${fg[red]}%}"
+local blue="%{${fg[blue]}%}"
+local green="%{${fg[green]}%}"
+local yellow="%{${fg[yellow]}%}"
+local default="%{${fg[default]}%}"
+
+# vcs_info was added in 4.3.9 but it works in earlier versions too. So load it
+# if the necessary files are available in ~/.zsh/functions/vcs_info (often a
+# symbolic link to current checkout of Zsh's sources).
+if [[ $ZSH_VERSION == (4.3.<9->*|4.<4->*|<5->*) ||
+ -d ~/.zsh/functions/vcs_info ]]; then
+ # Update fpath to allow loading the vcs_info functions.
+ if [[ -d ~/.zsh/functions/vcs_info ]]; then
+ fpath=(~/.zsh/functions/vcs_info/
+ ~/.zsh/functions/vcs_info/Backends
+ $fpath)
+ fi
+
+ # Load vcs_info to display information about version control repositories.
+ autoload -Uz vcs_info
+ # Only look for certain VCS.
+ zstyle ':vcs_info:*' enable git
+ # Check the repository for changes so they can be used in %u/%c (see
+ # below). This comes with a speed penalty for bigger repositories.
+ zstyle ':vcs_info:*' check-for-changes yes
+
+ # Set style of vcs_info display. The current branch (green) and VCS (blue)
+ # is displayed. If there is an special action going on (merge, rebase)
+ # it's also displayed (red). Also display if there are unstaged or staged
+ # (%u/%c) changes.
+ if [[ $ZSH_VERSION == (4.3.<11->*|4.<4->*|<5->*) ||
+ -d ~/.zsh/functions/vcs_info ]]; then
+ zstyle ':vcs_info:*' formats \
+ "(${green}%b%u%c${default}:${blue}%s${default}%m)" \
+ "${green}%u%c${default}"
+ zstyle ':vcs_info:*' actionformats \
+ "(${green}%b%u%c${default}/${red}%a${default}:${blue}%s${default}%m)" \
+ "${green}%u%c${default}"
+ else
+ # In older versions %u and %c are not defined yet and are not
+ # correctly expanded.
+ zstyle ':vcs_info:*' formats \
+ "(${green}%b${default}:${blue}%s${default})"
+ zstyle ':vcs_info:*' actionformats \
+ "(${green}%b${default}/${red}%a${default}:${blue}%s${default})"
+ fi
+ # Set style for formats/actionformats when unstaged (%u) and staged (%c)
+ # changes are detected in the repository; check-for-changes must be set to
+ # true for this to work. Thanks to Bart Trojanowski
+ # (http://jukie.net/~bart/blog/pimping-out-zsh-prompt) for the idea
+ # (2010-03-11 00:20 CET).
+ zstyle ':vcs_info:*' unstagedstr '¹'
+ zstyle ':vcs_info:*' stagedstr '²'
+
+ # Default to run vcs_info. If possible we prevent running it later for
+ # speed reasons. If set to a non empty value vcs_info is run.
+ zshrc_force_run_vcs_info=1
+
+ # Cache system inspired by Bart Trojanowski
+ # (http://jukie.net/~bart/blog/pimping-out-zsh-prompt).
+ zstyle ':vcs_info:*+pre-get-data:*' hooks pre-get-data
+ +vi-pre-get-data() {
+ # Only Git and Mercurial support and need caching. Abort if any other
+ # VCS is used.
+ [[ $vcs != git && $vcs != hg ]] && return
+
+ # If the shell just started up or we changed directories (or for other
+ # custom reasons) we must run vcs_info.
+ if [[ -n $zshrc_force_run_vcs_info ]]; then
+ zshrc_force_run_vcs_info=
+ return
+ fi
+
+ # Don't run vcs_info by default to speed up the shell.
+ ret=1
+ # If a git/hg command was run then run vcs_info as the status might
+ # need to be updated.
+ case $(fc -ln $(($HISTCMD-1))) in
+ git* | g\ *)
+ ret=0
+ ;;
+ hg*)
+ ret=0
+ ;;
+ esac
+ }
+
+ # Display number of WIP stashes (this excludes manually named commits
+ # which might be used for something else), thanks to
+ # http://eseth.org/2010/git-in-zsh.html (viewed on 2013-04-27) for the
+ # idea to display the stash count.
+ function +vi-git-stashes() {
+ if [[ -s ${hook_com[base]/.git/refs/stash} ]]; then
+ local -a stashes
+ # Thanks to Valodim in #zsh on Freenode (2013-07-01 14:14 CEST)
+ # for the solution to "grep" the output with (M) and :#(...).
+ stashes=( ${(M)${(f)"$(git stash list 2>/dev/null)"}:#(*WIP*)} )
+
+ if [[ ${#stashes} -gt 0 ]]; then
+ hook_com[misc]+=" ${yellow}${#stashes}s${default}"
+ fi
+ fi
+ }
+
+ # Apply hooks to Git.
+ zstyle ':vcs_info:git*+set-message:*' hooks git-stashes
+
+ # Must run vcs_info when changing directories.
+ prompt_chpwd() {
+ zshrc_force_run_vcs_info=1
+ }
+ chpwd_functions+=(prompt_chpwd)
+
+ # Used by prompt code below to determine if vcs_info should be run.
+ zshrc_use_vcs_info=1
+else
+ zshrc_use_vcs_info=
+fi
+
+typeset -a zshrc_longrun_data
+zshrc_longrun_data=()
+# Display runtime in seconds for long running programs (> 60 seconds) and send
+# a bell to notify me.
+zshrc_longrun_preexec() {
+ local program=$3
+
+ # Handle fg.
+ local REPLY
+ zshrc_resolve_fg_to_resumed_job_name $program
+ program=$REPLY
+
+ # No background process found.
+ if [[ -z $program ]]; then
+ return
+ fi
-# Set the default prompt. The current host and working directory is displayed,
+ # Don't track the time for certain (possible) long running processes which
+ # need no automatic notification.
+ for ignore in elinks man mutt vim; do
+ case $program in
+ $ignore | $ignore\ *)
+ zshrc_longrun_data=()
+ return
+ ;;
+ esac
+ done
+
+ zshrc_longrun_data=($program $EPOCHSECONDS)
+}
+zshrc_longrun_precmd() {
+ # No previous timestamp available or disabled for this command, ignore.
+ if [[ -z $zshrc_longrun_data ]]; then
+ return
+ fi
+
+ local difference=$(( EPOCHSECONDS - zshrc_longrun_data[2] ))
+ if [[ $difference -gt 60 ]]; then
+ echo
+ echo -n "${fg[yellow]}"
+ echo -n "~> ${(V)zshrc_longrun_data[1]} took $difference seconds."
+ echo -n "${fg[default]}"
+ echo "\a" # send bell
+ fi
+
+ # Clear status. Prevents displaying old status information when pressing
+ # enter with an empty command line.
+ zshrc_longrun_data=()
+}
+preexec_functions+=(zshrc_longrun_preexec)
+precmd_functions+=(zshrc_longrun_precmd)
+
+# Set the prompt. A two line prompt is used. On the top left the current
+# working directory is displayed, on the right vcs_info (if available) and the
+# current time in hex. On the bottom left current user name and host is shown,
# the exit code of the last command if it wasn't 0, the number of running jobs
-# if not 0 and a + if this shell is running inside another shell.
+# if not 0.
+#
# The prompt is in green and blue to make easily detectable, the error exit
-# code in red and bold and the job count in yellow.
-PROMPT="%{${fg[green]}%}%B%m%b%{${fg[default]}%}:\
-%{${fg[blue]}%}%B%~%b%{${fg[default]}%} \
-%(1j.%{${fg[yellow]}%}%j%{${fg[default]}%}.)%(2L.+.)%# \
-%(?..(%{${fg[red]}%}%B%?%b%{${fg[default]}%}%) )"
-
-# Use new completion system.
-autoload -U compinit && compinit
-# Load the complist module which provides additions to completion lists
-# (coloring, scrollable).
+# code in red and bold and the job count in yellow. Designed for dark
+# terminals.
+#
+# Thanks to Adam's prompt for the basic idea of this prompt.
+zshrc_prompt_precmd() {
+ # Regex to remove elements which take no space. Used to calculate the
+ # width of the top prompt. Thanks to Bart's and Adam's prompt code in
+ # Functions/Prompts/prompt_*_setup.
+ local zero='%([BSUbfksu]|([FB]|){*})'
+
+ # Call vcs_info before every prompt.
+ if [[ -n $zshrc_use_vcs_info ]]; then
+ vcs_info
+ else
+ vcs_info_msg_0_=
+ vcs_info_msg_1_=
+ fi
+
+ # Setup. Create variables holding the formatted content.
+
+ # Current directory in yellow, truncated if necessary (WIDTH is replaced
+ # below).
+ local directory="${yellow}%WIDTH<..<%~%<<${default}"
+ # Minimal information about the VCS, only displayed if there are
+ # unstaged/staged changes.
+ local vcs_staged=${vcs_info_msg_1_}
+
+ # Information about the VCS in this directory.
+ local vcs=${vcs_info_msg_0_}
+ # Current time (seconds since epoch) in Hex in bright blue.
+ local seconds="${blue}%B0x$(([##16] EPOCHSECONDS))%b${default}"
+
+ # User name (%n) in bright green.
+ local user="${green}%B%n%b${default}"
+ # Host name (%m) in bright green; underlined if running on a remote system
+ # through SSH.
+ local host="${green}%B%m%b${default}"
+ if [[ -n $SSH_CONNECTION ]]; then
+ host="%U${host}%u"
+ fi
+
+ # Number of background processes in yellow if not zero.
+ local background="%(1j.${yellow}%j${default}.)"
+ # Exit code in bright red in parentheses if not zero.
+ local exitcode="%(?..(${red}%B%?%b${default}%) )"
+ # Prompt symbol, % for normal users, # in red for root.
+ local symbol="%(!.${red}#${default}.%%)"
+
+ # Prefix characters in first and second line.
+ local top_prefix="${blue}%B.-%b${default}"
+ local bottom_prefix="${blue}%B'%b${default}"
+
+ # Combine them to create the prompt.
+
+ local top_left=${vcs_staged}
+ local top_right="${vcs}(${seconds})"
+
+ local width_top_prefix=${#${(S%%)top_prefix//$~zero/}}
+ local width_top_left=${#${(S%%)top_left//$~zero/}}
+ local width_top_right=${#${(S%%)top_right//$~zero/}}
+
+ # Calculate the maximum width of ${top_left}. -2 are the braces of
+ # ${top_left}, -1 is one separator from ${top_separator} (we want at least
+ # one between left and right parts).
+ local top_left_width_max=$((
+ COLUMNS - $width_top_prefix
+ - $width_top_left - 2
+ - 1
+ - $width_top_right
+ ))
+ # Truncate directory if necessary.
+ top_left="(${directory/WIDTH/${top_left_width_max}})${top_left}"
+ width_top_left=${#${(S%%)top_left//$~zero/}}
+
+ # Calculate the width of the top prompt to fill the middle with "-".
+ local width=$((
+ COLUMNS - width_top_prefix - width_top_left - width_top_right
+ ))
+ local top_separator="%B${blue}${(l:${width}::-:)}%b${default}"
+
+ PROMPT="${top_prefix}${top_left}${top_separator}${top_right}
+${bottom_prefix}${user}@${host} ${background}${symbol} ${exitcode}"
+}
+precmd_functions+=(zshrc_prompt_precmd)
+
+
+# When GNU screen, tmux, xterm or rxvt is used set the name of the window to
+# the currently running program.
+#
+# When a program is started preexec() sets the window's name to it; when it
+# stops precmd() resets the window's name to 'zsh'. 'fg' is supported and sets
+# the window's name to the resumed job.
+#
+# It works with GNU screen, tmux, xterm and rxvt.
+#
+# If a command is run with sudo or if the shell is running as root then a ! is
+# added at the beginning of the command to make this clear. If a command is
+# running on a different computer with ssh a @ is added at the beginning. If
+# screen/tmux is running on the remote machine instead of @screen @:hostname
+# (or @tmux ..; hostname replaced by the machine's hostname) is displayed.
+# This only works if the .zshrc on the server also uses this command.
+#
+# screen* is necessary as `screen` uses screen.linux for example for a linux
+# console.
+if [[ $TERM == screen* || $TERM == xterm* || $TERM == rxvt* ]]; then
+ # Is set to a non empty value to reset the window name in the next
+ # precmd() call.
+ zshrc_window_reset=yes
+
+ zshrc_window_preexec() {
+ # Get the program name with its arguments.
+ local program_name=$1
+
+ # When sudo is used, use real program name instead, but with an
+ # exclamation mark at the beginning (handled below).
+ local program_sudo=
+ if [[ $program_name == sudo* ]]; then
+ program_name=${program_name#sudo }
+ program_sudo=yes
+ fi
+
+ # Handle fg.
+ local REPLY
+ zshrc_resolve_fg_to_resumed_job_name $program_name
+ program_name=$REPLY
+
+ # Remove all arguments from the program name.
+ program_name=${program_name%% *}
+
+ # Ignore often used commands which are only running for a very short
+ # time. This prevents a "blinking" name when it's changed to "cd" for
+ # example and then some milliseconds later back to "zsh".
+ [[ $program_name == (cd*|d|ls|l|la|ll|clear|c) ]] && return
+
+ # Change my shortcuts so the real name of the program is displayed.
+ case $program_name in
+ e)
+ program_name=elinks
+ ;;
+ g)
+ program_name=git
+ ;;
+ m)
+ program_name=make
+ ;;
+ p)
+ program_name=less
+ ;;
+ v)
+ program_name=vim
+ ;;
+ mu)
+ program_name=mutt
+ ;;
+ esac
+
+ # Add an exclamation mark at the beginning if running with sudo or if
+ # running zsh as root.
+ if [[ -n $program_sudo || $UID -eq 0 ]]; then
+ program_name=!$program_name
+ fi
+
+ # Add an at mark at the beginning if running through ssh on a
+ # different computer.
+ if [[ -n $SSH_CONNECTION ]]; then
+ program_name="@$program_name"
+
+ # If screen is running in SSH then display "@:hostname" as title
+ # in the term/outer screen.
+ if [[ $program_name == @screen || $program_name == @tmux ]]; then
+ program_name="@:${HOST//.*/}"
+ # Use "@:!hostname" for root screens.
+ elif [[ $program_name == @!screen || $program_name == @!tmux ]]; then
+ program_name="@:!${HOST//.*/}"
+ fi
+ fi
+
+ # Set the window name to the currently running program.
+ zshrc_window_title $program_name
+
+ # Tell precmd() to reset the window name when the program stops.
+ zshrc_window_reset=yes
+ }
+
+ zshrc_window_precmd() {
+ # Abort if no window name reset is necessary.
+ [[ -z $zshrc_window_reset ]] && return
+
+ # Reset the window name to 'zsh'.
+ local name=zsh
+ # If the function was called with an argument then reset the window
+ # name to '.zsh' (used by clear alias).
+ if [[ -n $1 ]]; then
+ name=.zsh
+ fi
+
+ # Prepend prefixes like in zshrc_window_preexec().
+ if [[ $UID -eq 0 ]]; then
+ name="!$name"
+ fi
+ if [[ -n $SSH_CONNECTION ]]; then
+ name="@$name"
+ fi
+ zshrc_window_title $name
+
+ # Just reset the name, so no screen reset necessary for the moment.
+ zshrc_window_reset=
+ }
+
+ # Sets the window title. Works with GNU screen, tmux (which uses screen as
+ # TERM), xterm and rxvt. (V) escapes all non-printable characters, thanks
+ # to Mikachu in #zsh on Freenode (2010-08-07 17:09 CEST).
+ if [[ $TERM == screen* ]]; then
+ zshrc_window_title() {
+ print -n "\ek${(V)1}\e\\"
+ }
+ elif [[ $TERM == xterm* || $TERM == rxvt* ]]; then
+ zshrc_window_title() {
+ print -n "\e]2;${(V)1}\e\\"
+ }
+ else
+ # Fallback if another TERM is used.
+ zshrc_window_title() { }
+ fi
+
+ # Add the preexec() and precmd() hooks.
+ preexec_functions+=(zshrc_window_preexec)
+ precmd_functions+=(zshrc_window_precmd)
+else
+ # Fallback if another TERM is used, necessary to run screen (see below in
+ # "RUN COMMANDS").
+ zshrc_window_preexec() { }
+fi
+
+
+# COMPLETION SETTINGS
+
+# Load the complist module which provides additional features to completion
+# lists (coloring, scrolling).
zmodload zsh/complist
-# Make sure the list of possible completions is displayed after pressing
-# the first time.
-setopt nolistambiguous
-# Allow completions in the middle of a text, i.e. "/usr/bin/whatever"
-# completes like "/usr/bin/". Useful when adding new options to commands.
-bindkey "^I" expand-or-complete-prefix
-# Use cache to speed up completions.
-zstyle ':completion:*' use-cache on
+# Use new completion system, store dumpfile in ~/.zsh/cache to prevent
+# cluttering of ~/. $fpath must be set before calling this. Thanks to Adlai in
+# #zsh on Freenode (2009-08-07 21:05 CEST) for reminding me of the $fpath
+# problem.
+autoload -Uz compinit; compinit -d ~/.zsh/cache/zcompdump
+
+# Use cache to speed up some slow completions (dpkg, perl modules, etc.).
+zstyle ':completion:*' use-cache yes
zstyle ':completion:*' cache-path ~/.zsh/cache
-# Ignore case if currently typed string doesn't match.
-zstyle ':completion:*' matcher-list '' 'm:{a-zA-Z}={A-Za-z}'
+
+# List all files in the current directory when pressing tab on an empty input,
+# behave like complete-word otherwise. Thanks to John Eikenberry [1] for the
+# code, read on 2014-03-15.
+#
+# [1]: http://unix.stackexchange.com/a/32426
+complete-word-or-complete-list-of-files() {
+ if [[ $#BUFFER == 0 ]]; then
+ BUFFER='ls '
+ CURSOR=3
+ zle list-choices
+ zle backward-kill-word
+ else
+ zle complete-word
+ fi
+}
+zle -N complete-word-or-complete-list-of-files
+# Let the completion system handle all completions, including expanding of
+# shell wildcards (which is handled by other shell mechanisms if the default
+# expand-or-complete is used).
+bindkey '^I' complete-word-or-complete-list-of-files
+# If there are multiple matches after pressing always display them
+# immediately without requiring another . a completes to aa and
+# lists aaa, aab, aac as possible completions if the directory contains aaa,
+# aab, aac, bbb instead of only completing to aa.
+setopt nolistambiguous
+# Support completions in the middle of a word, without this option zsh jumps
+# to the end of the word before the completion process begins. Is required for
+# the _prefix completer.
+setopt completeinword
+
+# Force a reload of the completion system if nothing matched; this fixes
+# installing a program and then trying to tab-complete its name. Thanks to
+# Alex Munroe [1] for the code, read on 2014-03-03.
+#
+# [1]: https://github.com/eevee/rc/blob/master/.zshrc
+_force_rehash() {
+ if (( CURRENT == 1 )); then
+ rehash
+ fi
+ # We didn't really complete anything.
+ return 1
+}
+
+zstyle ':completion:::::' completer \
+ _force_rehash _expand _complete _prefix _ignored _approximate
+
+# Match specification to be tried when completing items. Each group ('...') is
+# tried after another if no matches were found, once matches are found no
+# other groups are tried. Thanks to Mikachu in #zsh on Freenode (2012-08-28
+# 18:48 CEST) for explanations.
+#
+# When matching also include the uppercase variant of typed characters
+# ('m:{a-z}={A-Z}'); using '' before this group would try the unmodified match
+# first, but I prefer to get all matches immediately (e.g. if Makefile and
+# makefile exist in the current directory echo m matches both, with '' it
+# would only match makefile because it found one match). This allows typing in
+# lowercase most of the time and completion fixes the case, which is faster.
+#
+# Don't perform these fixes in _approximate to prevent it from changing the
+# input too much. Thanks to the book "From Bash to Z Shell" page 249.
+zstyle ':completion:*:(^approximate):*' matcher-list 'm:{a-z}={A-Z}'
+
+# Allow one mistake per three characters. Thanks to the book "From Bash to Z
+# Shell" page 248.
+zstyle -e ':completion:*:approximate:*' max-errors \
+ 'reply=( $(( ($#PREFIX + $#SUFFIX) / 3 )) )'
+
+# Expand shell wildcards to all matching files after . echo *
+# results in a b c if the directory contains the files a, b, c. Thanks to the
+# book "From Bash to Z Shell" page 246.
+zstyle ':completion:*:expand:*' tag-order all-expansions
+# Keep prefixes unexpanded if possible: $HOME/ doesn't expand $HOME,
+# while $HOME does.
+zstyle ':completion:*:expand:*' keep-prefix yes
+
+# When completing multiple path components display all matching ambiguous
+# components. For example /u/s/d/r/README lists all matching READMEs
+# instead of just the matching paths up to the r/ component. Can be slow if
+# there are many matching files.
+zstyle ':completion:*' list-suffixes yes
+
+# Use ls-like colors for completions.
+zstyle ':completion:*' list-colors ${(s.:.)LS_COLORS}
+
+# Make completion lists scrollable so "do you wish to see all n possibilities"
+# is no longer displayed. Display current position in percent (%p).
+zstyle ':completion:*:default' list-prompt '%p'
+# Display group name (%d) (like 'external command', 'alias', etc.), in bold.
+# Also display a message if _approximate found errors and no matches were
+# found.
+zstyle ':completion:*' format ' %B%d%b:'
+zstyle ':completion:*:corrections' format ' %B%d%b (errors: %e)'
+zstyle ':completion:*:warnings' format ' %Bno matches for %d%b'
+# Display different types of matches separately.
+zstyle ':completion:*' group-name ''
+
+# Separate man pages by section.
+zstyle ':completion:*' separate-sections yes
+
+# Don't draw trailing / in bold (new in zsh 4.3.11). Thanks to Mikachu in #zsh
+# on Freenode for the fix (2010-12-17 13:46 CET).
+zle_highlight=(suffix:none)
+
# Ignore completion functions.
zstyle ':completion:*:functions' ignored-patterns '_*'
+
+# When offering typo corrections, do not propose anything which starts with an
+# underscore (such as many of Zsh's shell functions). Thanks to paradigm [1]
+# for the idea (read on 2013-04-07).
+#
+# [1]: https://github.com/paradigm/dotfiles/blob/master/.zshrc
+CORRECT_IGNORE='_*'
+
# Ignore parent directory.
zstyle ':completion:*:(cd|mv|cp):*' ignore-parents parent pwd
-# Use ls like colors for completions.
-zstyle ':completion:*' list-colors ${(s.:.)LS_COLORS}
-# Make completion lists scrollable so "do you wish to see all n possibilities"
-# is no longer displayed.
-zstyle ':completion:*' list-prompt '%p'
+# Always complete file names only once in the current line. This makes it easy
+# to complete multiple file names because I can just press tab to get all
+# possible values. Otherwise I would have to skip the first value again and
+# again. Thanks to Mikachu in #zsh on Freenode (2011-08-11 14:42 CEST) for the
+# hint to use other. other is necessary so prefix lists both prefix and
+# prefixrest if the directory contains prefix and prefixrest.
+zstyle ':completion:*:all-files' ignore-line other
+# Except for mv and cp, because I often want to use to similar names, so I
+# complete to the same and change it.
+zstyle ':completion:*:(mv|cp):all-files' ignore-line no
-# Enable zsh's extended glob abilities.
-setopt extendedglob
+# Don't complete ./config.* files, this makes running ./configure much
+# simpler. Thanks to Nomexous in #zsh on Freenode (2010-03-16 01:54 CET)
+zstyle ':completion:*:*:-command-:*' ignored-patterns './config.*'
+# Don't complete unwanted files with Vim. Thanks to Nomexous in #zsh on
+# Freenode (2010-06-06 04:54 CEST). See below for a way to complete them.
+zstyle ':completion:*:*:vim:*:all-files' ignored-patterns \
+ '*.aux' '*.log' '*.pdf' '*.bbl' '*.blg' '*.out' '*-blx.bib' '*.run.xml' \
+ '*.o' \
+ '*.pyc' \
+ '*.class'
+
+# Provide a fallback completer which always completes files. Useful when Zsh's
+# completion is too "smart". Thanks to Frank Terbeck
+# (http://www.zsh.org/mla/users/2009/msg01038.html).
+zle -C complete-files complete-word _generic
+zstyle ':completion:complete-files:*' completer _files
+bindkey '^F' complete-files
+
+# Completion for my wrapper scripts.
+compdef slocate=locate
+compdef srsync=rsync
+compdef srsync-incremental=rsync
+compdef svalgrind=valgrind
+compdef sc=systemctl
-# Don't exit if is pressed.
-setopt ignoreeof
+
+# CUSTOM ALIASES AND FUNCTIONS
# If ^C is pressed while typing a command, add it to the history so it can be
# easily retrieved later and then abort like ^C normally does. This is useful
# when I want to abort an command to do something in between and then finish
# typing the command.
+#
+# Thanks to Vadim Zeitlin for a fix (--) so lines
+# starting with - don't cause errors; and to Nadav Har'El
+# for a fix (-r) to handle whitespace/quotes
+# correctly, both on the Zsh mailing list.
TRAPINT() {
+ # Don't store this line in history if histignorespace is enabled and the
+ # line starts with a space.
+ if [[ -o histignorespace && ${BUFFER[1]} = ' ' ]]; then
+ return $1
+ fi
+
# Store the current buffer in the history.
- zle && print -s $BUFFER
+ zle && print -s -r -- $BUFFER
- # Return the default exit code so zsh aborts the current command.
+ # Return the default exit code so Zsh aborts the current command.
return $1
}
-# Simplify calls to less, automatically redirects all output.
+# Load aliases and similar functions also used by other shells.
+if [[ -f ~/.shell/aliases ]]; then
+ . ~/.shell/aliases
+fi
+
+# Make sure aliases are expanded when using sudo.
+alias sudo='sudo '
+
+# Global aliases for often used redirections.
+alias -g E='2>&1'
+alias -g N='>/dev/null'
+alias -g EN='2>/dev/null'
alias -g L='2>&1 | less'
-# Simplify calls to colordiff, output is also piped through less.
-alias -g D='2>&1 | colordiff L'
-# Simplify calls to grep.
+alias -g LS='2>&1 | less -S' # -S prevents wrapping of long lines
+alias -g D='2>&1 | colordiff | less'
+# Global aliases for often used commands.
+alias -g A='| awk'
+alias -g A1="| awk '{ print \$1 }'"
+alias -g A2="| awk '{ print \$2 }'"
+alias -g A3="| awk '{ print \$3 }'"
alias -g G='| grep'
+alias -g GB='| grep -vE "^Binary file .+ matches\$"'
+alias -g H='| head'
+alias -g P='| perl'
+alias -g S='| sort'
+alias -g SL='| sort | less'
+alias -g T='| tail'
+alias -g U='| uniq'
+alias -g X='`xsel -p || xclip -o`' # X selection
-# Multiple files given to Vim are opened in tabs.
-alias vim='vim -p'
-# Shortcuts for Vim.
-alias v='vim'
-alias vi='vim'
+# Make going up directories simple.
+alias -g ...='../..'
+alias -g ....='../../..'
+alias -g .....='../../../..'
-# Exit binding like in Vim.
-alias :q='exit'
+# If the window naming feature is used (see above) then use ".zsh" (leading
+# dot) as title name after running clear so it's clear to me that the window
+# is empty. I open so much windows that I don't know in which I have something
+# important. This helps me to remember which windows are empty (I run clear
+# after I finished my work in a window).
+if [[ -n $zshrc_window_reset ]]; then
+ alias clear='clear; zshrc_window_reset=yes; zshrc_window_precmd reset'
+fi
-# Improved ls which displays the files in columns (-C), visualises directories,
-# links and other special files (-F) and pages everything through less (L).
-#
-# If available use GNU ls with colorized output. If it isn't available use
-# normal ls which needs CLICOLOR_FORCE so it displays colors when used with a
-# pager.
-ls --color &> /dev/null
-if [[ $? -eq 0 ]]; then
- alias ls='ls --color'
-else
- alias ls='CLICOLOR_FORCE=1 ls -G'
-fi
-# Main ls function.
-function ls() {
- command ls -C -F $* L
+# CUSTOM COMMANDS
+
+# Display all branches (except stash) in gitk but only 200 commits as this is
+# much faster. Also put in the background and disown. Thanks to drizzd in #git
+# on Freenode (2010-04-03 17:55 CEST).
+(( $+commands[gitk] )) && gitk() {
+ command gitk --max-count=200 --branches --remotes --tags "$@" &
+ disown %command
}
-# Helper function to list all files.
-function la() {
- ls -a $*
+# Same for tig (except the disown part as it's no GUI program).
+(( $+commands[tig] )) && tig() {
+ command tig --max-count=200 --branches --remotes --tags "$@"
}
-# Helper function to list all files in list format with access rights, etc.
-function ll() {
- la -l $*
+
+# Choose the "best" PDF viewer available. Also setup completion for `pdf`.
+if (( $+commands[katarakt] )); then
+ pdf() {
+ command katarakt "$@" 2>/dev/null &
+ disown %command
+ }
+ # No completion for katarakt yet.
+ compdef pdf=xpdf
+elif (( $+commands[xpdf] )); then
+ pdf() {
+ command xpdf "$@" 2>/dev/null &
+ disown %command
+ }
+ compdef pdf=xpdf
+elif (( $+commands[zathura] )); then
+ pdf() {
+ command zathura "$@" 2>/dev/null &
+ disown %command
+ }
+ # No completion for zathura yet.
+ compdef pdf=xpdf
+fi
+
+
+# OS SPECIFIC SETTINGS
+
+if [[ $OSTYPE == linux* ]]; then
+ # Settings when creating Debian packages.
+ export DEBEMAIL=simon@ruderich.org
+ export DEBFULLNAME='Simon Ruderich'
+fi
+
+
+# LOAD ADDITIONAL CONFIGURATION FILES
+
+# Configuration options for rc.local.
+
+# Multiplexer to use. By default GNU screen is used. Possible values: screen,
+# tmux and empty (no multiplexer).
+zshrc_use_multiplexer=screen
+# Additional arguments for fortune.
+zshrc_fortune_arguments=()
+
+source_config ~/.zsh/rc.local
+
+
+# RUN COMMANDS
+
+# Make sure the multiplexer is available. Otherwise the exec terminates our
+# session.
+if [[ -n $zshrc_use_multiplexer ]]; then
+ if ! (( $+commands[$zshrc_use_multiplexer] )); then
+ echo "Multiplexer '$zshrc_use_multiplexer' not found." >&2
+ zshrc_use_multiplexer=
+ fi
+fi
+
+# If not already in screen or tmux, reattach to a running session or create a
+# new one. This also starts screen/tmux on a remote server when connecting
+# through ssh.
+if [[ $TERM != dumb && $TERM != dialup && $TERM != linux
+ && -z $STY && -z $TMUX ]]; then
+ # Get running detached sessions.
+ if [[ $zshrc_use_multiplexer = screen ]]; then
+ session=$(screen -list | grep 'Detached' | awk '{ print $1; exit }')
+ elif [[ $zshrc_use_multiplexer = tmux ]]; then
+ session=$(tmux list-sessions 2>/dev/null \
+ | sed '/(attached)$/ d; s/^\([0-9]\{1,\}\).*$/\1/; q')
+ fi
+
+ # As we exec later we have to set the title here.
+ if [[ $zshrc_use_multiplexer = screen ]]; then
+ zshrc_window_preexec screen
+ elif [[ $zshrc_use_multiplexer = tmux ]]; then
+ zshrc_window_preexec tmux
+ fi
+
+ # Create a new session if none is running.
+ if [[ -z $session ]]; then
+ if [[ $zshrc_use_multiplexer = screen ]]; then
+ exec screen
+ elif [[ $zshrc_use_multiplexer = tmux ]]; then
+ exec tmux
+ fi
+ # Reattach to a running session.
+ else
+ if [[ $zshrc_use_multiplexer = screen ]]; then
+ exec screen -r $session
+ elif [[ $zshrc_use_multiplexer = tmux ]]; then
+ exec tmux attach-session -t $session
+ fi
+ fi
+fi
+
+# Colorize stderr in bold red. Very useful when looking for errors.
+if [[ $LD_PRELOAD != *libcoloredstderr.so* ]]; then
+ # coloredstderr found, use it.
+ if [[ -f ~/.zsh/libcoloredstderr.so ]]; then
+ export LD_PRELOAD="$HOME/.zsh/libcoloredstderr.so:$LD_PRELOAD"
+ export COLORED_STDERR_FDS=2,
+ export COLORED_STDERR_PRE=$'\033[91m' # bright red
+ export COLORED_STDERR_IGNORED_BINARIES=/usr/bin/tset
+ # Use the fallback solution.
+ #
+ # Thanks to http://gentoo-wiki.com/wiki/Zsh for the basic script and
+ # Mikachu in #zsh on Freenode (2010-03-07 04:03 CET) for some improvements
+ # (-r, printf). It's not yet perfect and doesn't work with su and git for
+ # example, but it can handle most interactive output quite well (even with
+ # no trailing new line) and in cases it doesn't work, the E alias can be
+ # used as workaround.
+ #
+ # Moved in the "run commands" section to prevent one unnecessary zsh
+ # process when starting GNU screen/tmux (see above).
+ else
+ exec 2>>(while read -r -k -u 0 line; do
+ printf '\e[91m%s\e[0m' $line
+ print -n $'\0'
+ done &)
+ fi
+fi
+
+# Display possible log messages from ~/.xinitrc (if `xmessage` wasn't
+# installed). No race condition as xinitrc has finished before a shell is
+# executed and only one shell is started on login.
+if [[ -f ~/.xinitrc.errors ]]; then
+ echo "${fg_bold[red]}xinitrc failed!${fg_bold[default]}"
+ echo
+ cat ~/.xinitrc.errors
+ rm ~/.xinitrc.errors
+ echo
+fi
+
+# Run the following programs every 4 hours (and when zsh starts).
+PERIOD=14400
+periodic() {
+ # Display fortunes.
+ (( $+commands[fortune] )) && fortune -ac "${zshrc_fortune_arguments[@]}"
+ # Display reminders.
+ (( $+commands[rem] )) && [[ -f ~/.reminders ]] && rem -h
}
-# Load rc file for current OS.
-source_config ~/.zsh os rc $(uname) nolocal
-# Load rc file for current hostname (first part before a dot) or rc.local.
-source_config ~/.zsh host rc ${$(hostname)//.*/}
+# RESTART SETTINGS
+
+zmodload -F zsh/stat b:zstat
+
+# Remember startup time. Used to perform automatic restarts when ~/.zshrc is
+# modified.
+zshrc_startup_time=$EPOCHSECONDS
+
+# Automatically restart Zsh if ~/.zshrc was modified.
+zshrc_restart_precmd() {
+ local stat
+ if ! zstat -A stat +mtime ~/.zshrc; then
+ return
+ fi
+
+ # ~/.zshrc wasn't modified, nothing to do.
+ if [[ $stat -le $zshrc_startup_time ]]; then
+ return
+ fi
+
+ local startup
+ strftime -s startup '%Y-%m-%d %H:%M:%S' $zshrc_startup_time
+
+ echo -n "${fg[magenta]}"
+ echo -n "~/.zshrc modified since startup ($startup) ... "
+ echo -n "${fg[default]}"
+
+ if [[ -n $zshrc_disable_restart ]]; then
+ echo 'automatic restart disabled.'
+ return
+ fi
+
+ # Don't exec if we have background processes because execing will let us
+ # lose control over them.
+ if [[ ${#${(k)jobstates}} -ne 0 ]]; then
+ echo 'active background jobs!'
+ return
+ fi
+
+ # Try to start a new interactive shell. If it fails, something is wrong.
+ # Don't kill our current session by execing it, abort instead.
+ zsh -i -c 'exit 42'
+ if [[ $? -ne 42 ]]; then
+ echo -n ${fg_bold[red]}
+ echo 'failed to start new zsh!'
+ echo -n ${fg_bold[default]}
+ return
+ fi
+
+ echo 'restarting zsh.'
+ echo
+
+ exec zsh
+}
+precmd_functions+=(zshrc_restart_precmd)
+
+# vim: ft=zsh