X-Git-Url: https://ruderich.org/simon/gitweb/?a=blobdiff_plain;f=vimrc;h=20685e94930d75e6b0ba75f06fea735d339f4bf1;hb=be676bfae2c0ef626e3c132ab9c59f147116aec5;hp=496858e0599266281548e3311de6ba26ae4af050;hpb=b286ba313d2c69c2676e39241e6ae4ddfd888dc5;p=config%2Fdotfiles.git diff --git a/vimrc b/vimrc index 496858e..20685e9 100644 --- a/vimrc +++ b/vimrc @@ -1,14 +1,104 @@ " Vim main configuration file. +" Copyright (C) 2011-2012 Simon Ruderich +" +" This file is free software: you can redistribute it and/or modify +" it under the terms of the GNU General Public License as published by +" the Free Software Foundation, either version 3 of the License, or +" (at your option) any later version. +" +" This file is distributed in the hope that it will be useful, +" but WITHOUT ANY WARRANTY; without even the implied warranty of +" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +" GNU General Public License for more details. +" +" You should have received a copy of the GNU General Public License +" along with this file. If not, see . -" Make sure Vim (and not Vi) settings are enabled. + +" EDITOR SETTINGS + +" Save 'runtimepath' in case it was changed by the system's configuration +" files. Also save 'diff' as set all& resets it; but somehow later (after +" sourcing the vimrc - for example in a VimEnter autocmd) it gets +" automagically restored to the correct value. +if has('eval') + let s:save_runtimepath = &runtimepath + let s:save_diff = &diff +endif +" Reset all options (except 'term', 'lines' and 'columns'). This makes sure a +" system wide configuration file doesn't change default values. +set all& +" And restore it after all other options were reset. +if has('eval') + let &runtimepath = s:save_runtimepath + let &diff = s:save_diff + unlet s:save_runtimepath + unlet s:save_diff +endif + +" Make sure Vim (and not Vi) settings are used. set nocompatible -" Enable automatic filedection, plugin and indention load. -filetype plugin indent on +" Use UTF-8 for all internal data (buffers, registers, etc.). This doesn't +" affect reading files in different encodings, see 'fileencodings' for that. +set encoding=utf-8 + +" Load my scripts from ~/.vim (my scripts) and ~/.vim/runtime (checkout of Vim +" runtime files) if available. +set runtimepath-=~/.vim +set runtimepath^=~/.vim,~/.vim/runtime -" Use utf-8 file encoding for all files. -set fileencodings=utf-8 +" Don't store swap files in the same directory as the edited file. +set directory-=. +" But store them in ~/.tmp if available. +set directory^=~/.tmp + +" Disable modelines as they may cause security problems. Instead use +" securemodelines (Vim script #1876). +set nomodeline + +" Complete to longest common string (list:longest) and then complete all full +" matches after another (full). Thanks to pbrisbin +" (http://pbrisbin.com:8080/dotfiles/vimrc). +set wildmode=list:longest,full + +" Increase history of executed commands (:). +set history=1000 + +" Increase number of possible undos. +set undolevels=1000 + +if has('viminfo') + " Remember marks (including the last cursor position) for more files. + set viminfo^='1000 +endif + +" Use strong encryption if possible, also used for swap/undo files. +if exists('+cryptmethod') + set cryptmethod=blowfish +endif + +" Clear all vimrc-related autocmds. Has to be done here as the vimrc augroup +" is used multiple times. +if has('autocmd') + augroup vimrc + autocmd! + augroup END +endif + + +" EDIT SETTINGS + +" Enable automatic file detection, plugin and indention support. +if has('autocmd') + filetype off " necessary for pathogen to force a reload of ftplugins + filetype plugin indent on +endif + +" Use UTF-8 file encoding for all files. Automatically recognize latin1 in +" existing files. +set fileencodings=utf-8,latin1 " Wrap text after 78 characters. set textwidth=78 @@ -17,7 +107,7 @@ set textwidth=78 set shiftwidth=4 set softtabstop=4 set expandtab -" When < and > is used indent/deindent to the next shiftwidth boundary. +" When < and > is used indent/deindent to the next 'shiftwidth' boundary. set shiftround " Use the default value for real tabs. set tabstop=8 @@ -25,72 +115,557 @@ set tabstop=8 " Enable auto indention. set autoindent -" Activate lines display. -set number -" Display the ruler with current line/file position. -set ruler -" Display partial commands in the status line. -set showcmd +" When joining lines only add one space after a sentence. +set nojoinspaces + +" Allow backspacing over autoindent and line breaks. +set backspace=indent,eol + +" Start a comment when hitting enter after a commented line (r) and when using +" o or O around a commented line (o). +set formatoptions+=ro +" Don't break a line if was already longer then 'textwidth' when insert mode +" started. +set formatoptions+=l + +" Allow virtual editing (cursor can be positioned anywhere, even when there is +" no character) in visual block mode. +set virtualedit=block + +" Already display matches while typing the search command. This makes spotting +" errors easy. +set incsearch " Activate syntax folding. -set foldmethod=syntax -set foldcolumn=2 -set foldlevel=99 " no folding at default +if has('folding') + set foldmethod=syntax + set foldcolumn=2 + set foldlevel=99 " no closed folds at default, 'foldenable' would disable + " folding which is not what I want +endif -" Use smartcase mode when searching; only check for case if the searched word -" contains a capital character. +" Only check for case if the searched word contains a capital character. set ignorecase set smartcase " Activate spell checking, use English as default. -set spell -set spelllang=en_us +if exists('+spell') && has('syntax') + " But not when diffing as spell checking is distracting in this case. + if !&diff + set spell + endif + set spelllang=en_us +endif -" When joining lines only add one space after a sentence. -set nojoinspaces +" Allow buffers with changes to be hidden. Very important for effective +" editing with multiple buffers. +set hidden -" Allow backspacing over autoindent, line breaks and insert mode starts. -set backspace=indent,eol,start -" Don't use any modelines. -set nomodeline +" DISPLAY SETTINGS + +" Use a dark background. Doesn't change the background color, only sets text +" colors for a dark terminal. +set background=dark + +" Display line numbers. +set number +" But use as little space as necessary for the numbers column. Thanks to James +" Vega (http://git.jamessan.com/?p=etc/vim.git;a=summary). +if exists('+numberwidth') + set numberwidth=1 +endif +" Display the ruler with current line/file position. If 'statusline' is used +" then this only affects . +set ruler +" Display partial commands in the status line. +set showcmd -" When completing paths first use the longest path then display a list of all -" possible files. -set wildmode=longest,list +" Don't redraw screen when executing macros; increases speed. Thanks to James +" Vega (http://git.jamessan.com/?p=etc/vim.git;a=summary). +set lazyredraw " Visualize the line the cursor is currently in. -set cursorline +if exists('+cursorline') + set cursorline +endif -" Use a dark background. -set background=dark +" Highlight all matches on the screen when searching. Use (see below) to +" remove the highlighting until the next search. +set hlsearch +" Display tabs, trailing space, non breakable spaces and long lines (when +" wrapping is disabled). +set list +set listchars=trail:-,extends:> +if v:version >= 700 + set listchars+=nbsp:! +endif -" Use "," as my mapleader. -let mapleader = "," -let maplocalleader = "," +if has('statusline') + " Always display the status line even if there is only one window. + set laststatus=2 -" Settings for the NERD commenter. -" Don't create any mappings I don't want to use. -let NERDCreateDefaultMappings=0 -" Map toggle comment. -map NERDCommenterToggle + " If there's more than one buffer return "/" (e.g. "/05") where + " is the highest buffer number, otherwise return nothing. Used in + " 'statusline' to get an overview of available buffer numbers. + function! StatuslineBufferCount() + let l:bufnr = bufnr('$') + if l:bufnr > 1 + let l:result = '/' + if exists('*printf') + let l:result .= printf('%02d', l:bufnr) + else + " Older Vims don't have printf() (and no .= either). Emulate + " "%02d". + if l:bufnr < 10 + let l:result = l:result . '0' + endif + let l:result = l:result . l:bufnr + endif + return l:result + else + return '' + endif + endfunction + + set statusline= + " on the left + set statusline+=%02n " buffer number + set statusline+=%{StatuslineBufferCount()} " highest buffer number + set statusline+=: + set statusline+=%f\ " path to current file in buffer + set statusline+=%h " [help] if buffer is help file + set statusline+=%w " [Preview] if buffer is preview buffer + set statusline+=%m " [+] if buffer was modified, + " [-] if 'modifiable' is off + set statusline+=%r " [RO] if buffer is read only + + " on the right + set statusline+=%= " right align + set statusline+=0x%-8B\ " current character under cursor as hex + set statusline+=%-12.(%l,%c%V%)\ " line number (%l), + " column number (%c), + " virtual column number if different + " than %c (%V) + set statusline+=%P " position in file in percent +endif + + +" MAPPINGS (except for plugins, see PLUGIN SETTINGS below) + +" noremap is used to make sure the right side is executed as is and can't be +" modified by a plugin or other settings. Except for which isn't +" affected by mappings. + +" Easy way to exit insert mode. +inoremap jj +inoremap jk +" Also for command mode, thanks to http://github.com/mitechie/pyvim +" (2010-10-15). +cnoremap jj +cnoremap jk + +" Disable arrow keys for all modes except command modes. Thanks to James Vega +" (http://git.jamessan.com/?p=etc/vim.git;a=summary). +map +map +map +map +imap +imap +imap +imap +" Also disable arrow keys in command mode, use / as replacement (see +" below). +cmap +cmap +cmap +cmap + +" Use / as replacement for / in command mode. Thanks to +" abstrakt and grayw in #vim on Freenode (2010-04-12 21:20 CEST). +cnoremap +cnoremap + +if has('eval') +" Don't move the cursor to the first column for certain scroll commands (, , ). Thanks to jamessan in #vim on Freenode (2011-08-31 +" 02:27 CEST) for the 'nostartofline' tip. But I can't use 'nostartofline' +" directly because it also enables that feature for other commands which I +" don't want. + + " Set 'nostartofline' for a single movement. + function! s:TemporaryNostartofline(movement) + let l:startofline = &startofline + set nostartofline + execute 'normal! ' . a:movement + let &startofline = l:startofline + endfunction + + " Thanks to fow in #vim on Freenode (2012-02-16 15:38 CET) for the idea to + " use ""; Vim documentation reference: :help <>. + nnoremap + \ :call TemporaryNostartofline("C-F>") + nnoremap + \ :call TemporaryNostartofline("C-B>") + nnoremap + \ :call TemporaryNostartofline("C-D>") + nnoremap + \ :call TemporaryNostartofline("C-U>") +endif + +" Write before suspending, thanks to deryni in #vim on Freenode (2011-05-09 +" 20:02 CEST). To suspend without saving either unmap this or use :stop. +nnoremap :update:stop + +" 2 gives more verbose information, use it by default. Thanks to NCS_One +" in #vim on Freenode (2011-08-15 00:17 CEST). +nnoremap 2 + +" Use to move down a page and - to move up one like in mutt. Don't use +" nnoremap so the / 'nostartofline' fix (see above) works. +nmap +nmap - + +" Go to next and previous buffer. Thanks to elik in #vim on Freenode +" (2010-05-16 18:38 CEST) for this idea. +nnoremap gb :bnext +nnoremap gB :bprev + +" Fast access to buffers. +nnoremap 1 :1buffer +nnoremap 2 :2buffer +nnoremap 3 :3buffer +nnoremap 4 :4buffer +nnoremap 5 :5buffer +nnoremap 6 :6buffer +nnoremap 7 :7buffer +nnoremap 8 :8buffer +nnoremap 9 :9buffer +nnoremap 0 :10buffer + +" Make last active window the only window. Similar to o. +nnoremap O po + +" Maps to change spell language between English and German and disable spell +" checking. +if exists('+spell') + nnoremap sn :set nospell + nnoremap se :set spell spelllang=en_us + nnoremap sd :set spell spelllang=de_de +endif + +" Add semicolon to the end of the line. Thanks to +" http://www.van-laarhoven.org/vim/.vimrc for this idea and godlygeek in #vim +" on Freenode for an improved version which doesn't clobber any marks. +nnoremap ; :call setline(line('.'), getline('.') . ';') + +" * and # for selections in visual mode. Thanks to +" http://got-ravings.blogspot.com/2008/07/vim-pr0n-visual-search-mappings.html +" and all nerds involved (godlygeek, strull in #vim on Freenode). +if has('eval') + function! s:VSetSearch() + let l:temp = @@ + normal! gvy + let @/ = '\V' . substitute(escape(@@, '\'), '\n', '\\n', 'g') + let @@ = l:temp + endfunction + vnoremap * :call VSetSearch()// + vnoremap # :call VSetSearch()?? +endif " I often type "W" instead of "w" when trying to save a file. Fix my mistake. -cmap W w -cmap Wq wq +" Thanks to Tony Mechelynck from the Vim +" mailing list for the commands. +if v:version < 700 + cnoreabbrev W w + cnoreabbrev Wa wa + cnoreabbrev Wq wq + cnoreabbrev Wqa wqa +else + cnoreabbrev W + \ ((getcmdtype() == ':' && getcmdpos() <= 2) ? 'w' : 'W') + cnoreabbrev Wa + \ ((getcmdtype() == ':' && getcmdpos() <= 3) ? 'wa' : 'Wa') + cnoreabbrev Wq + \ ((getcmdtype() == ':' && getcmdpos() <= 3) ? 'wq' : 'Wq') + cnoreabbrev Wqa + \ ((getcmdtype() == ':' && getcmdpos() <= 4) ? 'wqa' : 'Wqa') +endif +" Also fix my typo with "Q". +if v:version < 700 + cnoreabbrev Q q + cnoreabbrev Qa qa +else + cnoreabbrev Q + \ ((getcmdtype() == ':' && getcmdpos() <= 2) ? 'q' : 'Q') + cnoreabbrev Qa + \ ((getcmdtype() == ':' && getcmdpos() <= 3) ? 'qa' : 'Qa') +endif + +" In case 'hlsearch' is used disable it with . Thanks to frogonwheels and +" vimgor (bot) in #vim on Freenode (2010-03-30 05:58 CEST). +noremap :nohlsearch +" in insert mode deletes a lot, break undo sequence before deleting the +" line so the change can be undone. Thanks to the vimrc_example.vim file in +" Vim's source. +inoremap u +" Same for (insert previously inserted text and leave insert mode). +inoremap u +" And for (insert previously inserted text). +inoremap u +" And for (delete word before cursor). +inoremap u -" Disable Apple style movements in MacVim. -if has("gui_macvim") - let macvim_skip_cmd_opt_movement = 1 +if has('eval') +" New text-objects ii and ai to work on text with the same indentation. Thanks +" to http://vim.wikia.com/index.php?title=Indent_text_object&oldid=27126 +" (visited on 2011-11-19). + onoremap ai :call IndTxtObj(0) + onoremap ii :call IndTxtObj(1) + vnoremap ai :call IndTxtObj(0)gv + vnoremap ii :call IndTxtObj(1)gv + + function! s:IndTxtObj(inner) + let curline = line(".") + let lastline = line("$") + let i = indent(line(".")) - &shiftwidth * (v:count1 - 1) + let i = i < 0 ? 0 : i + if getline(".") !~ "^\\s*$" + let p = line(".") - 1 + let nextblank = getline(p) =~ "^\\s*$" + while p > 0 + \ && ((i == 0 && !nextblank) + \ || (i > 0 && ((indent(p) >= i + \ && !(nextblank && a:inner)) + \ || (nextblank && !a:inner)))) + - + let p = line(".") - 1 + let nextblank = getline(p) =~ "^\\s*$" + endwhile + normal! 0V + call cursor(curline, 0) + let p = line(".") + 1 + let nextblank = getline(p) =~ "^\\s*$" + while p <= lastline + \ && ((i == 0 && !nextblank) + \ || (i > 0 && ((indent(p) >= i + \ && !(nextblank && a:inner)) + \ || (nextblank && !a:inner)))) + + + let p = line(".") + 1 + let nextblank = getline(p) =~ "^\\s*$" + endwhile + normal! $ + endif + endfunction endif +" ABBREVIATIONS + +" Fix some of my spelling mistakes. +iabbrev relle reelle +iabbrev reele reelle + + +" SYNTAX SETTINGS + " Activate syntax coloring. -syntax enable +if has('syntax') + syntax enable + +" Don't highlight more than 500 columns as I normally don't have that long +" lines and they slow down syntax coloring. Thanks to Derek Wyatt +" (http://www.derekwyatt.org/vim/the-vimrc-file/). + if exists('+synmaxcol') + set synmaxcol=500 + endif + +" Use (limited) syntax based omni completion if no other omni completion is +" available. Taken from :help ft-syntax-omni. + if has('autocmd') && exists('+omnifunc') + augroup vimrc + autocmd FileType * + \ if &omnifunc == '' | + \ setlocal omnifunc=syntaxcomplete#Complete | + \ endif + augroup END + endif + +" Highlight lines longer than 78 characters. Thanks to Tony Mechelynck +" from the Vim mailing list. It can easily be +" disabled when necessary with :2match (in Vim >= 700). + if exists(':2match') + 2match Todo /\%>78v./ + else + match Todo /\%>78v./ + endif + + if exists('*matchadd') +" Highlight some important keywords in all documents. + for s:x in ['TODO', 'XXX', 'FIXME', 'CHANGED', 'REMOVED', 'DELETED'] + call matchadd('Todo', s:x) + endfor + +" Highlight unicode whitespace which is no normal whitespace (0x20). + for s:x in ['00a0', '1680', '180e', '2000', '2001', '2002', '2003', + \ '2004', '2005', '2006', '2007', '2008', '2009', '200a', + \ '200b', '200c', '200d', '202f', '205f', '2060', '3000', + \ 'feff'] + call matchadd('Error', '\%u' . s:x) + endfor + endif +" Settings for specific filetypes. -" Automatically save and the load the file state (stored in ~/.vim/view). -autocmd BufWrite * mkview -autocmd BufRead * loadview + " Haskell. + let g:hs_highlight_delimiters = 1 + let g:hs_highlight_boolean = 1 + let g:hs_highlight_types = 1 + let g:hs_highlight_more_types = 1 + " Perl. + let g:perl_fold = 1 + let g:perl_fold_blocks = 1 + let g:perl_nofold_packages = 1 + let g:perl_include_pod = 1 " syntax coloring for PODs + " Python. + let g:python_highlight_all = 1 + " Vim. + let g:vimsyn_embed = 0 " don't highlight embedded languages + let g:vimsyn_folding = 'af' " folding for autogroups (a) and functions (f) + " XML. + let g:xml_syntax_folding = 1 +endif + + +" PLUGIN SETTINGS + +if has('eval') +" Use pathogen which allows one 'runtimepath' entry per plugin. This makes +" installing/removing/updating plugins simple. (Used for plugins with more +" than one file.) + if v:version >= 700 + execute 'call pathogen#runtime_append_all_bundles()' + endif + +" Settings for the NERD commenter. + " Don't create any mappings I don't want to use. + let g:NERDCreateDefaultMappings = 0 + " Map toggle comment. + map NERDCommenterToggle + +" XPTemplate settings. + " Try to maintain snippet rendering even after editing outside of a + " snippet. + let g:xptemplate_strict = 0 + " Don't complete any braces automatically. + let g:xptemplate_brace_complete = 0 + " Only highlight the current placeholder. + let g:xptemplate_highlight = 'current' +endif + + +" AUTO COMMANDS + +" Use a custom auto group to prevent problems when the vimrc files is sourced +" twice. +if has('autocmd') + augroup vimrc + +" Go to last position of opened files. Taken from :help last-position-jump. + autocmd BufReadPost * + \ if line("'\"") > 1 && line("'\"") <= line('$') | + \ execute "normal! g'\"" | + \ endif +" But not for Git commits, go to beginning of the file. + autocmd BufReadPost COMMIT_EDITMSG normal! gg + +" Make sure 'list' and 'number' is disabled in help files. This is necessary +" when switching to a help buffer which is in the background with :buffer as +" these options are local to windows (and not only to buffers). This happens +" because I often want to use only one window and thus the help buffer is in +" the background. + autocmd BufWinEnter *.txt + \ if &filetype == 'help' | + \ setlocal nolist | + \ setlocal nonumber | + \ endif + +" Automatically disable 'paste' mode when leaving insert mode. Thanks to +" Raimondi in #vim on Freenode (2010-08-14 23:01 CEST). Very useful as I only +" want to paste once and then 'paste' gets automatically unset. InsertLeave +" doesn't exist in older Vims. + if exists('##InsertLeave') + autocmd InsertLeave * set nopaste + endif + +" Write file when running :mak[e] before 'makeprg' is called. QuickFixCmdPre +" doesn't exist in older Vims. + if exists('##QuickFixCmdPre') + autocmd QuickFixCmdPre * write + endif + +" AFTER/FTPLUGIN AUTO COMMANDS + +" Disable spell checking for files which don't need it. + autocmd FileType deb setlocal nospell + autocmd FileType diff setlocal nospell + autocmd FileType tar setlocal nospell +" Fix to allow Vim edit crontab files as crontab doesn't work with +" backupcopy=auto. + autocmd FileType crontab setlocal backupcopy=yes +" Don't use the modeline in git commits as the diff created by `git commit -v` +" may contain one which could change the filetype or other settings of the +" commit buffer. Also make sure we use only 72 characters per line which is +" the recommendation for git commit messages (http://tpope.net/node/106). + autocmd FileType gitcommit let g:secure_modelines_allowed_items = [] | + \ setlocal textwidth=72 +" Use the same comment string as for Vim files in Vimperator files. + autocmd FileType vimperator setlocal commentstring=\"%s +" Use tex compiler for (La)TeX files. + autocmd FileType tex compiler tex + +" FTDETECT AUTO COMMANDS + +" Recognize .md as markdown files (Vim default is .mkd). + autocmd BufRead,BufNewFile *.md set filetype=mkd +" Recognize .test as Tcl files. + autocmd BufRead,BufNewFile *.test set filetype=tcl + +" OTHER AUTO COMMANDS + +" Disable spell checking, displaying of list characters and long lines when +" viewing documentation. + autocmd BufReadPost /usr/share/doc/* setlocal nospell nolist | 2match + +" Use diff filetype for mercurial patches in patch queue. + autocmd BufReadPost */.hg/patches/* set filetype=diff + + augroup END +endif + + +" CUSTOM FUNCTIONS AND COMMANDS + +if has('eval') +" Convenient command to see the difference between the current buffer and the +" file it was loaded from, thus the changes you made. Thanks to the +" vimrc_example.vim file in Vim's source. Modified to use the same filetype +" for the diffed file than the filetype for the original file. + if !exists(':DiffOrig') + command DiffOrig + \ let s:diff_orig_filetype = &filetype + \ | vertical new + \ | let &filetype = s:diff_orig_filetype + \ | unlet s:diff_orig_filetype + \ | set buftype=nofile + \ | read ++edit # + \ | 0d_ + \ | diffthis + \ | wincmd p + \ | diffthis + endif +endif