X-Git-Url: https://ruderich.org/simon/gitweb/?a=blobdiff_plain;f=vimrc;h=82e8d33b2dcd01d9394f9d27f5dec90909f64f2e;hb=74a9391aa3067df930fe641a3425405c07e4fa57;hp=1dfc91956094d9af1abefc371e1a5e02c5cb44e5;hpb=874a5ebdc7dcd3608bbdcf15a1f891dbc62303c7;p=config%2Fdotfiles.git
diff --git a/vimrc b/vimrc
index 1dfc919..82e8d33 100644
--- a/vimrc
+++ b/vimrc
@@ -1,20 +1,31 @@
" Vim main configuration file.
+" Copyright (C) 2008-2013 Simon Ruderich
+"
+" This file is free software: you can redistribute it and/or modify
+" it under the terms of the GNU General Public License as published by
+" the Free Software Foundation, either version 3 of the License, or
+" (at your option) any later version.
+"
+" This file is distributed in the hope that it will be useful,
+" but WITHOUT ANY WARRANTY; without even the implied warranty of
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+" GNU General Public License for more details.
+"
+" You should have received a copy of the GNU General Public License
+" along with this file. If not, see .
-" EDITOR SETTINGS
-
-" Prevent editing as root as it may cause security problems. Use sudoedit
-" instead. Thanks to godlygeek in #vim on Freenode (2009-06-19 22:21 CEST).
-if $HOME == '/root' || exists('$SUDO_USER')
- echomsg 'Running as root is forbidden! Use sudoedit.'
- qall
-endif
+" EDITOR SETTINGS
" Save 'runtimepath' in case it was changed by the system's configuration
-" files.
+" files. Also save 'diff' as set all& resets it; but somehow later (after
+" sourcing the vimrc - for example in a VimEnter autocmd) it gets
+" automagically restored to the correct value. Not sure what exactly Vim is
+" doing there.
if has('eval')
let s:save_runtimepath = &runtimepath
+ let s:save_diff = &diff
endif
" Reset all options (except 'term', 'lines' and 'columns'). This makes sure a
" system wide configuration file doesn't change default values.
@@ -22,18 +33,30 @@ set all&
" And restore it after all other options were reset.
if has('eval')
let &runtimepath = s:save_runtimepath
+ let &diff = s:save_diff
+ unlet s:save_runtimepath
+ unlet s:save_diff
endif
" Make sure Vim (and not Vi) settings are used.
set nocompatible
+" Use UTF-8 for all internal data (buffers, registers, etc.). This doesn't
+" affect reading files in different encodings, see 'fileencodings' for that.
+set encoding=utf-8
+
" Load my scripts from ~/.vim (my scripts) and ~/.vim/runtime (checkout of Vim
-" runtime files).
+" runtime files) if available.
set runtimepath-=~/.vim
set runtimepath^=~/.vim,~/.vim/runtime
-" Don't store swap files in the same directory as the edited file.
-set directory-=.
+" Don't store swap files in the same directory as the edited file, but only if
+" we have a "safe" writable directory available.
+if filewritable('~/.tmp') == 2 || filewritable('~/tmp') == 2
+ set directory-=.
+endif
+" But store them in ~/.tmp or ~/tmp (already set by default) if available.
+set directory^=~/.tmp
" Disable modelines as they may cause security problems. Instead use
" securemodelines (Vim script #1876).
@@ -43,23 +66,92 @@ set nomodeline
" matches after another (full). Thanks to pbrisbin
" (http://pbrisbin.com:8080/dotfiles/vimrc).
set wildmode=list:longest,full
+" Ignore case when completing files/directories.
+if exists('+wildignorecase')
+ set wildignorecase
+endif
-" Increase history of executed commands (:).
+" Ignore files with the following extensions because I almost never want to
+" edit them in Vim (specifying them manually still works of course).
+set wildignore=
+" C
+set wildignore+=*.o,*.d,*.so
+" Java
+set wildignore+=*.class
+" LaTeX
+set wildignore+=*.aux,*.log,*.out,*.toc,*.pdf
+" Python
+set wildignore+=*.pyc
+
+" Show completion menu even if only one entry matches.
+if exists('+completeopt')
+ set completeopt+=menuone
+endif
+
+" Increase history of executed commands (:) and search patterns (/).
set history=1000
" Increase number of possible undos.
set undolevels=1000
+" Remember marks (including the last cursor position) for more files. ^= is
+" necessary because 'viminfo' is parsed from the beginning and the first match
+" is used.
+if has('viminfo')
+ set viminfo^='1000
+endif
+
" Use strong encryption if possible, also used for swap/undo files.
-if v:version >= 703
+if exists('+cryptmethod')
set cryptmethod=blowfish
endif
+" Clear all vimrc-related autocmds. Has to be done here as the vimrc augroup
+" is used multiple times. Necessary to support reloading the vimrc.
+if has('autocmd')
+ augroup vimrc
+ autocmd!
+ augroup END
+endif
+
+
+" HELPER FUNCTIONS
+
+if has('eval')
+" Check if the given syntax group is available. Thanks to bairui in #vim on
+" Freenode (2012-02-19 01:15 CET) for the try/catch silent highlight idea.
+ function! s:HasSyntaxGroup(group)
+ try
+ execute 'silent highlight ' . a:group
+ " \a = [A-Za-z]
+ catch /^Vim\%((\a\+)\)\=:E411/ " 'highlight group not found'
+ return 0
+ endtry
+ return 1
+ endfunction
+
+" Check if the given Vim version and patch is available.
+ function! s:HasVersionAndPatch(version, patch)
+ return v:version > a:version
+ \ || (v:version == a:version && has('patch' . a:patch))
+ endfunction
+endif
+
+
+" TERMINAL SETTINGS
+
+" Also enable fast terminal mode in GNU screen and tmux, but not for SSH
+" connections.
+if &term =~# '^screen' && !exists('$SSH_CONNECTION')
+ set ttyfast
+endif
+
" EDIT SETTINGS
" Enable automatic file detection, plugin and indention support.
if has('autocmd')
+ filetype off " necessary for pathogen to force a reload of ftplugins
filetype plugin indent on
endif
@@ -67,6 +159,9 @@ endif
" existing files.
set fileencodings=utf-8,latin1
+" Always use unix line-endings for new files.
+set fileformats=unix,dos
+
" Wrap text after 78 characters.
set textwidth=78
@@ -94,38 +189,56 @@ set formatoptions+=ro
" Don't break a line if was already longer then 'textwidth' when insert mode
" started.
set formatoptions+=l
+" Remove comment leader when joining lines where it makes sense.
+if s:HasVersionAndPatch(703, 541)
+ set formatoptions+=j
+endif
" Allow virtual editing (cursor can be positioned anywhere, even when there is
" no character) in visual block mode.
set virtualedit=block
" Already display matches while typing the search command. This makes spotting
-" errors easy.
+" typos easy and searching faster.
set incsearch
" Activate syntax folding.
if has('folding')
set foldmethod=syntax
- set foldcolumn=2
+ " Only use fold column if we have enough space (for example not in a
+ " (virtual) terminal which has only 80 columns).
+ if &columns > 80
+ set foldcolumn=2
+ endif
set foldlevel=99 " no closed folds at default, 'foldenable' would disable
" folding which is not what I want
+ " Don't open folds for block movements like '(', '{', '[[', '[{', etc.
+ set foldopen-=block
endif
-" Only check for case if the searched word contains a capital character.
+" Only check case if the searched word contains a capital character.
set ignorecase
set smartcase
-" Activate spell checking, use English as default. Don't use spell checking
-" when diffing.
-if v:version >= 700 && has('syntax') && !&diff
- set spell
+" Activate spell checking, use English as default.
+if exists('+spell') && has('syntax')
+ " But not when diffing because spell checking is distracting in this case.
+ if !&diff
+ set spell
+ endif
set spelllang=en_us
endif
-" Allow buffers with changes to be hidden. Very important for effective
-" editing with multiple buffers.
+" Allow buffers with changes to be hidden. Very important for efficient
+" editing with multiple buffers. Prevents the "E37: No write since last change
+" (add ! to override)" warning when switching modified buffers.
set hidden
+" When splitting vertically put the new window right of the current one.
+if has('vertsplit')
+ set splitright
+endif
+
" DISPLAY SETTINGS
@@ -133,11 +246,16 @@ set hidden
" colors for a dark terminal.
set background=dark
+" Use my color scheme if 256 colors are available.
+if &t_Co == 256 || has('gui_running')
+ colorscheme simon
+endif
+
" Display line numbers.
set number
-" But use as little space as necessary for the numbers column. Thanks to James
+" But use as little space as possible for the numbers column. Thanks to James
" Vega (http://git.jamessan.com/?p=etc/vim.git;a=summary).
-if v:version >= 700
+if exists('+numberwidth')
set numberwidth=1
endif
" Display the ruler with current line/file position. If 'statusline' is used
@@ -151,31 +269,202 @@ set showcmd
set lazyredraw
" Visualize the line the cursor is currently in.
-if v:version >= 700
+if exists('+cursorline')
set cursorline
endif
-" Display tabs, trailing space, non breakable spaces and long lines (when
-" wrapping is disabled).
+" Highlight all matches on the screen when searching. Use (see below) to
+" remove the highlighting until the next search.
+set hlsearch
+
+" Display some special characters.
set list
-set listchars=trail:-,extends:>
+set listchars=
+" Display tabs as ">--------".
+set listchars+=tab:>-
+" Display trailing whitespace as "-".
+set listchars+=trail:-
+" Display markers for long lines when wrapping is disabled.
+set listchars+=extends:>,precedes:<
+" Display non-breakable space as "!".
if v:version >= 700
set listchars+=nbsp:!
endif
+" Don't draw the vertical split separator by using space as character. Thanks
+" to scp1 in #vim on Freenode (2012-06-16 16:12 CEST) for the idea to use a
+" non-breakable space. But a simple space works as well, as long as the
+" current color scheme is not reset.
+if has('windows') && has('folding')
+ set fillchars+=vert:\ " comment to prevent trailing whitespace
+endif
+
if has('statusline')
" Always display the status line even if there is only one window.
set laststatus=2
+ " If there's more than one buffer return "/" (e.g. "/05") where
+ " is the highest buffer number, otherwise return nothing. Used in
+ " 'statusline' to get an overview of available buffer numbers.
+ function! s:StatuslineBufferCount()
+ let l:bufnr = bufnr('$')
+ if l:bufnr > 1
+ let l:result = '/'
+ if exists('*printf')
+ let l:result .= printf('%02d', l:bufnr)
+ else
+ " Older Vims don't have printf() (and no .= either). Emulate
+ " "%02d".
+ if l:bufnr < 10
+ let l:result = l:result . '0'
+ endif
+ let l:result = l:result . l:bufnr
+ endif
+ return l:result
+ else
+ return ''
+ endif
+ endfunction
+
+ " Like %f but use relative filename if it's shorter than the absolute path
+ " (e.g. '../../file' vs. '~/long/path/to/file'). fnamemodify()'s ':.' is
+ " not enough because it doesn't create '../'s.
+ function! s:StatuslineRelativeFilename()
+ " Display only filename for help files.
+ if &buftype == 'help'
+ return expand('%:t')
+ endif
+ " Special case for scratch files.
+ if &buftype == 'nofile'
+ return '[Scratch]'
+ endif
+
+ let l:path = expand('%')
+ " No file.
+ if l:path == ''
+ return '[No Name]'
+ endif
+ " Path is already relative, nothing to do.
+ if stridx(l:path, '/') != 0
+ return l:path
+ endif
+
+ " Absolute path to this file.
+ let l:path = expand('%:p')
+ " Shortened path to this file, thanks to bairui in #vim on Freenode
+ " (2012-06-23 00:54) for the tip to use fnamemodify(). This is what
+ " Vim normally uses as %f (minus some exceptions).
+ let l:original_path = fnamemodify(l:path, ':~')
+ " Absolute path to the current working directory.
+ let l:cwd = getcwd()
+
+ " Working directory completely contained in path, replace it with a
+ " relative path. Happens for example when opening a file with netrw.
+ " %f displays this as absolute path, but we want a relative path of
+ " course.
+ if stridx(l:path, l:cwd) == 0
+ return strpart(l:path, strlen(l:cwd) + 1)
+ endif
+
+ let l:path_list = split(l:path, '/')
+ let l:cwd_list = split(l:cwd, '/')
+
+ " Remove the common path.
+ while l:path_list[0] == l:cwd_list[0]
+ call remove(l:path_list, 0)
+ call remove(l:cwd_list, 0)
+ endwhile
+
+ " Add as many '..' as necessary for the relative path and join the
+ " path. Thanks to Raimondi in #vim on Freenode (2012-06-23 01:13) for
+ " the hint to use repeat() instead of a loop.
+ let l:path = repeat('../', len(l:cwd_list)) . join(l:path_list, '/')
+
+ " Use the shorter path, either relative or absolute.
+ if strlen(l:path) < strlen(l:original_path)
+ return l:path
+ else
+ return l:original_path
+ endif
+ endfunction
+
+ " Display unexpected 'fileformat', 'fileencoding' and 'bomb' settings.
+ function! s:StatuslineFileFormat()
+ if &fileformat != 'unix'
+ return '[' . &fileformat . ']'
+ else
+ return ''
+ endif
+ endfunction
+ function! s:StatuslineFileEncoding()
+ if &fileencoding != '' && &fileencoding != 'utf-8'
+ \ && &filetype != 'help'
+ return '[' . &fileencoding . ']'
+ else
+ return ''
+ endif
+ endfunction
+ function! s:StatuslineFileBOMB()
+ if exists('+bomb') && &bomb
+ return '[BOM]'
+ else
+ return ''
+ endif
+ endfunction
+
+ " Return current syntax group in brackets or nothing if there's none.
+ function! s:StatuslineSyntaxGroup()
+ let l:group = synIDattr(synID(line('.'), col('.'), 1), 'name')
+ if l:group != ''
+ return '[' . l:group . '] '
+ else
+ return ''
+ endif
+ endfunction
+
+ " Short function names to make 'statusline' more readable.
+ function! SBC()
+ return s:StatuslineBufferCount()
+ endfunction
+ function! SRF()
+ return s:StatuslineRelativeFilename()
+ endfunction
+ function! SFF()
+ return s:StatuslineFileFormat()
+ endfunction
+ function! SFE()
+ return s:StatuslineFileEncoding()
+ endfunction
+ function! SFB()
+ return s:StatuslineFileBOMB()
+ endfunction
+ function! SSG()
+ return s:StatuslineSyntaxGroup()
+ endfunction
+
set statusline=
" on the left
- set statusline+=%02n: " buffer number
- set statusline+=%f\ " path to current file in buffer
- set statusline+=%h " [help] if buffer is help file
- set statusline+=%w " [Preview] if buffer is preview buffer
- set statusline+=%m " [+] if buffer was modified,
- " [-] if 'modifiable' is off
- set statusline+=%r " [RO] if buffer is read only
+ set statusline+=%02n " buffer number
+ set statusline+=%{SBC()} " highest buffer number
+ set statusline+=:
+ if has('modify_fname') && v:version >= 700 " some functions need 7.0
+ set statusline+=%{SRF()} " path to current file
+ set statusline+=\ " space after path
+ else
+ set statusline+=%f\ " path to current file in buffer
+ endif
+ set statusline+=%h " [help] if buffer is help file
+ set statusline+=%w " [Preview] if buffer is preview buffer
+ set statusline+=%m " [+] if buffer was modified,
+ " [-] if 'modifiable' is off
+ set statusline+=%r " [RO] if buffer is read only
+ if v:version >= 700 " %#..# needs 7.0
+ set statusline+=%#Error# " display warnings
+ set statusline+=%{SFF()} " - unexpected file format
+ set statusline+=%{SFE()} " - unexpected file encoding
+ set statusline+=%{SFB()} " - unexpected file byte order mask
+ set statusline+=%## " continue with normal colors
+ endif
" on the right
set statusline+=%= " right align
@@ -190,11 +479,17 @@ endif
" MAPPINGS (except for plugins, see PLUGIN SETTINGS below)
-" Easy way to exit insert mode.
+" noremap is used to make sure the right side is executed as is and can't be
+" modified by a plugin or other settings. Except for which isn't
+" affected by mappings.
+
+" Easy way to exit insert mode. jk is preferred because it's faster.
inoremap jj
+inoremap jk
" Also for command mode, thanks to http://github.com/mitechie/pyvim
" (2010-10-15).
cnoremap jj
+cnoremap jk
" Disable arrow keys for all modes except command modes. Thanks to James Vega
" (http://git.jamessan.com/?p=etc/vim.git;a=summary).
@@ -213,46 +508,111 @@ cmap
cmap
cmap
-" Use Ctrl-P/Ctrl-N as replacement for / in command mode. Thanks to
+" Use / as replacement for / in command mode. Thanks to
" abstrakt and grayw in #vim on Freenode (2010-04-12 21:20 CEST).
cnoremap
cnoremap
-" Use to move down a page and - to move up one like in mutt.
-nnoremap
-nnoremap -
+if has('eval')
+" Don't move the cursor to the first column for certain scroll commands (, , ). Thanks to jamessan in #vim on Freenode (2011-08-31
+" 02:27 CEST) for the 'nostartofline' tip. But I can't use 'nostartofline'
+" directly because it also enables that feature for other commands which I
+" don't want.
+
+ " Set 'nostartofline' for a single movement.
+ function! s:TemporaryNostartofline(movement)
+ let l:startofline = &startofline
+ set nostartofline
+ execute 'normal! ' . a:movement
+ let &startofline = l:startofline
+ endfunction
-" Behave like 'scrolloff' but only while searching. Thanks to "Benjamin R.
-" Haskell" from the Vim mailing list (2010-10-26).
-nnoremap n nzv3j3k
-nnoremap N Nzv3k3j
+ " Thanks to fow in #vim on Freenode (2012-02-16 15:38 CET) for the idea to
+ " use ""; Vim documentation reference: :help <>.
+ nnoremap
+ \ :call TemporaryNostartofline("C-F>")
+ nnoremap
+ \ :call TemporaryNostartofline("C-B>")
+ nnoremap
+ \ :call TemporaryNostartofline("C-D>")
+ nnoremap
+ \ :call TemporaryNostartofline("C-U>")
+endif
+
+" Write before suspending, thanks to deryni in #vim on Freenode (2011-05-09
+" 20:02 CEST). To suspend without saving either unmap this or use :stop.
+" Only the current buffer is written, thus switching to another buffer works
+" too.
+nnoremap :update:stop
+
+" 2 gives more verbose information, use it by default. Thanks to NCS_One
+" in #vim on Freenode (2011-08-15 00:17 CEST).
+nnoremap 2
+
+" Use to move down a page and - to move up one like in mutt. Don't use
+" nnoremap so the / 'nostartofline' fix (see above) works.
+nmap
+nmap -
" Go to next and previous buffer. Thanks to elik in #vim on Freenode
" (2010-05-16 18:38 CEST) for this idea.
nnoremap gb :bnext
-nnoremap gB :bprev
+nnoremap gB :bprevious
+if has('eval')
+ " But when starting again at the first buffer, print a warning which
+ " reminds me that I've already seen that buffer.
+ function! s:NextBuffer()
+ " Are we currently on the last buffer and moving to the first?
+ let l:last_buffer = 0
+ if bufnr('%') == bufnr('$') && bufnr('$') > 1
+ let l:last_buffer = 1
+ endif
+
+ " Go to the next buffer.
+ if !l:last_buffer
+ bnext
+
+ " Go to the first buffer, silent is necessary or the following message
+ " won't be displayed because it's overwritten by the status message
+ " displayed when entering a buffer.
+ else
+ silent bnext
+
+ echohl WarningMsg
+ echo 'Starting again at first buffer.'
+ echohl None
+ endif
+ endfunction
+ nnoremap gb :call NextBuffer()
+endif
" Fast access to buffers.
-nnoremap 1 :1b
-nnoremap 2 :2b
-nnoremap 3 :3b
-nnoremap 4 :4b
-nnoremap 5 :5b
-nnoremap 6 :6b
-nnoremap 7 :7b
-nnoremap 8 :8b
-nnoremap 9 :9b
-nnoremap 0 :10b
-
-" Make last active window the only window. Similar to o.
+nnoremap 1 :1buffer
+nnoremap 2 :2buffer
+nnoremap 3 :3buffer
+nnoremap 4 :4buffer
+nnoremap 5 :5buffer
+nnoremap 6 :6buffer
+nnoremap 7 :7buffer
+nnoremap 8 :8buffer
+nnoremap 9 :9buffer
+nnoremap 0 :10buffer
+
+" Make last active window the only window. Similar to o.
nnoremap O po
" Maps to change spell language between English and German and disable spell
" checking.
-if v:version >= 700
- noremap sn :set nospell
- noremap se :set spell spelllang=en_us
- noremap sd :set spell spelllang=de_de
+if exists('+spell')
+ nnoremap sn :set nospell
+ nnoremap se :set spell spelllang=en_us
+ nnoremap sd :set spell spelllang=de_de
+" If no spell support is available, these mappings do nothing.
+else
+ nmap sn
+ nmap se
+ nmap sd
endif
" Add semicolon to the end of the line. Thanks to
@@ -260,18 +620,30 @@ endif
" on Freenode for an improved version which doesn't clobber any marks.
nnoremap ; :call setline(line('.'), getline('.') . ';')
+if has('eval')
" * and # for selections in visual mode. Thanks to
" http://got-ravings.blogspot.com/2008/07/vim-pr0n-visual-search-mappings.html
" and all nerds involved (godlygeek, strull in #vim on Freenode).
-if has('eval')
function! s:VSetSearch()
- let temp = @@
+ let l:temp = @@ " unnamed register
normal! gvy
- let @/ = '\V' . substitute(escape(@@, '\'), '\n', '\\n', 'g')
- let @@ = temp
+ " Added \C to force 'noignorecase' while searching the current visual
+ " selection. I want to search for the exact string in this case.
+ let @/ = '\C' . '\V' . substitute(escape(@@, '\'), '\n', '\\n', 'g')
+ let @@ = l:temp
endfunction
vnoremap * :call VSetSearch()//
vnoremap # :call VSetSearch()??
+
+" Use 'noignorecase' for * and #. See comment in s:VSetSearch() for details.
+" Thanks to the writers of s:VSetSearch(), see above.
+ function! s:NSetSearch()
+ let l:cword = expand('')
+ let l:regex = substitute(escape(l:cword, '\'), '\n', '\\n', 'g')
+ let @/ = '\C\V'. '\<' . l:regex . '\>'
+ endfunction
+ nnoremap * :call NSetSearch()//
+ nnoremap # :call NSetSearch()??
endif
" I often type "W" instead of "w" when trying to save a file. Fix my mistake.
@@ -303,20 +675,75 @@ else
\ ((getcmdtype() == ':' && getcmdpos() <= 3) ? 'qa' : 'Qa')
endif
-" Make sure xa0 (alt + space) is automatically changed to a normal whitespace
-" if pressed accidentally while in insert mode (happens on Mac when alt
-" doesn't send escape). filereadable() is necessary for Leopard were 'mac' is
-" no longer set on the console.
-if has('mac') || filereadable('/Users/.localized')
- inoremap
-endif
+" In case 'hlsearch' is used disable it with . Thanks to frogonwheels and
+" vimgor (bot) in #vim on Freenode (2010-03-30 05:58 CEST).
+nnoremap :nohlsearch
+
+" in insert mode deletes a lot, break undo sequence before deleting the
+" line so the change can be undone. Thanks to the vimrc_example.vim file in
+" Vim's source.
+inoremap u
+" Same for (insert previously inserted text and leave insert mode).
+inoremap u
+" And for (insert previously inserted text).
+inoremap u
+" And for (delete word before cursor).
+inoremap u
-" Disable Apple style movements in MacVim.
-if has('gui_macvim') && has('eval')
- let macvim_skip_cmd_opt_movement = 1
+if has('eval')
+" New text-objects ii and ai to work on text with the same indentation. Thanks
+" to http://vim.wikia.com/index.php?title=Indent_text_object&oldid=27126
+" (visited on 2011-11-19).
+ onoremap ai :call IndTxtObj(0)
+ onoremap ii :call IndTxtObj(1)
+ vnoremap ai :call IndTxtObj(0)gv
+ vnoremap ii :call IndTxtObj(1)gv
+
+ function! s:IndTxtObj(inner)
+ let curline = line(".")
+ let lastline = line("$")
+ let i = indent(line(".")) - &shiftwidth * (v:count1 - 1)
+ let i = i < 0 ? 0 : i
+ if getline(".") !~ "^\\s*$"
+ let p = line(".") - 1
+ let nextblank = getline(p) =~ "^\\s*$"
+ while p > 0
+ \ && ((i == 0 && !nextblank)
+ \ || (i > 0 && ((indent(p) >= i
+ \ && !(nextblank && a:inner))
+ \ || (nextblank && !a:inner))))
+ -
+ let p = line(".") - 1
+ let nextblank = getline(p) =~ "^\\s*$"
+ endwhile
+ normal! 0V
+ call cursor(curline, 0)
+ let p = line(".") + 1
+ let nextblank = getline(p) =~ "^\\s*$"
+ while p <= lastline
+ \ && ((i == 0 && !nextblank)
+ \ || (i > 0 && ((indent(p) >= i
+ \ && !(nextblank && a:inner))
+ \ || (nextblank && !a:inner))))
+ +
+ let p = line(".") + 1
+ let nextblank = getline(p) =~ "^\\s*$"
+ endwhile
+ normal! $
+ endif
+ endfunction
endif
+" ABBREVIATIONS
+
+" Fix some of my spelling mistakes (German).
+inoreabbrev relle reelle
+inoreabbrev reele reelle
+" Fix some of my spelling mistakes (English).
+inoreabbrev completly completely
+
+
" SYNTAX SETTINGS
" Activate syntax coloring.
@@ -326,36 +753,141 @@ if has('syntax')
" Don't highlight more than 500 columns as I normally don't have that long
" lines and they slow down syntax coloring. Thanks to Derek Wyatt
" (http://www.derekwyatt.org/vim/the-vimrc-file/).
- set synmaxcol=500
+ if exists('+synmaxcol')
+ set synmaxcol=500
+ endif
+
+" Use (limited) syntax based omni completion if no other omni completion is
+" available. Taken from :help ft-syntax-omni.
+ if has('autocmd') && exists('+omnifunc')
+ augroup vimrc
+ autocmd FileType *
+ \ if &omnifunc == '' |
+ \ setlocal omnifunc=syntaxcomplete#Complete |
+ \ endif
+ augroup END
+ endif
+
+" Function to enable all custom highlights. Necessary as highlights are
+" window-local and thus must be set for each new window.
+ function! s:CustomSyntaxHighlights()
+ " Not the first time called, nothing to do.
+ if exists('w:vimrc_syntax_run')
+ return
+ endif
+ let w:vimrc_syntax_run = 1
" Highlight lines longer than 78 characters. Thanks to Tony Mechelynck
" from the Vim mailing list. It can easily be
" disabled when necessary with :2match (in Vim >= 700).
- if v:version >= 700
- 2match Todo /\%>78v./
- else
- match Todo /\%>78v./
+ if !&diff && exists(':2match')
+ " Use ColorColumn for overlong lines if available and my color
+ " scheme is used.
+ if &t_Co == 256 && s:HasSyntaxGroup('ColorColumn')
+ 2match ColorColumn /\%>78v./
+ else
+ 2match Todo /\%>78v./
+ endif
+ elseif !&diff
+ match Todo /\%>78v./
+ endif
+
+ if exists('*matchadd')
+" Highlight some important keywords in all documents.
+ let l:todos = ['TODO', 'XXX', 'FIXME',
+ \ 'CHANGED', 'REMOVED', 'DELETED']
+ " Compatibility fix for Vim 6.4 which can't handle for in function
+ " (without function it's ignored).
+ execute ' for l:x in l:todos'
+ \ '| call matchadd("Todo", l:x)'
+ \ '| endfor'
+
+" Highlight Unicode whitespace which is no normal whitespace (0x20).
+ let l:spaces = ['00a0', '1680', '180e', '2000', '2001', '2002',
+ \ '2003', '2004', '2005', '2006', '2007', '2008',
+ \ '2009', '200a', '200b', '200c', '200d', '202f',
+ \ '205f', '2060', '3000', 'feff']
+ " Compatibility fix for Vim 6.4. Escape \ inside the " string or
+ " it won't work!
+ execute ' for l:x in l:spaces'
+ \ '| call matchadd("Error", "\\%u" . l:x)'
+ \ '| endfor'
+
+" Special highlight for tabs to reduce their visibility in contrast to other
+" SpecialKey characters (e.g. ^L).
+ if &t_Co == 256 && s:HasSyntaxGroup('specialKeyTab')
+ call matchadd('specialKeyTab', '\t')
+ endif
+ endif
+ endfunction
+" Enable highlights for the current and all new windows. Thanks to bairui in
+" #vim on Freenode (2012-04-01 00:22 CEST) for the WinEnter suggestion.
+ call s:CustomSyntaxHighlights()
+ if has('autocmd')
+ augroup vimrc
+ autocmd WinEnter * call s:CustomSyntaxHighlights()
+ augroup END
endif
-" Highlight TODO, FIXME, CHANGED and XXX in all documents.
- if v:version > 701 || (v:version == 701 && has('patch42'))
- call matchadd('Todo', '\(TODO\|FIXME\|CHANGED\|XXX\)')
- endif
+" Settings for specific filetypes.
+
+ " C
+ let g:c_no_if0_fold = 1 " fix weird double fold in #if0 in recent versions
+ " Haskell.
+ let g:hs_highlight_delimiters = 1
+ let g:hs_highlight_boolean = 1
+ let g:hs_highlight_types = 1
+ let g:hs_highlight_more_types = 1
+ " Java.
+ let g:java_highlight_java_lang_ids = 1 " color java.lang.* identifiers
+ " Perl.
+ let g:perl_fold = 1
+ let g:perl_fold_blocks = 1
+ let g:perl_nofold_packages = 1
+ let g:perl_include_pod = 1 " syntax coloring for PODs
+ " PHP.
+ let g:php_folding = 3 " fold functions
+ let g:php_short_tags = 0 " no short tags ( .. ?>), not always usable
+ let g:php_sql_query = 1 " highlight SQL queries in strings
+ " Python.
+ let g:python_highlight_all = 1
+ " Shell.
+ let g:sh_noisk = 1 " don't add . to 'iskeyword'
+ let g:sh_is_posix = 1 " POSIX shell (e.g. dash) is compatible enough
+ let g:sh_fold_enabled = 7 " functions (1), heredoc (2) and if/do/for (4)
+ " Vim.
+ let g:vimsyn_embed = 0 " don't highlight embedded languages
+ let g:vimsyn_folding = 'af' " folding for autogroups (a) and functions (f)
+ " XML.
+ let g:xml_syntax_folding = 1
endif
" PLUGIN SETTINGS
-" Settings for the NERD commenter.
-" Don't create any mappings I don't want to use.
if has('eval')
- let NERDCreateDefaultMappings = 0
-endif
-" Map toggle comment.
-map NERDCommenterToggle
+" Use pathogen which allows one 'runtimepath' entry per plugin. This makes
+" installing/removing/updating plugins simple. (Used for plugins with more
+" than one file.) Ignore errors in case pathogen is not installed.
+ if v:version >= 700
+ silent! execute 'call pathogen#infect()'
+ endif
+
+" Settings for securemodelines.
+ " Only allow items I need (also includes spl which is not enabled by
+ " default).
+ if v:version >= 700 " need lists
+ let g:secure_modelines_allowed_items = ['ft', 'spl', 'fdm',
+ \ 'sw', 'sts', 'noet']
+ endif
+
+" Settings for the NERD commenter.
+ " Don't create any mappings I don't want to use.
+ let g:NERDCreateDefaultMappings = 0
+ " Map toggle comment.
+ nmap NERDCommenterToggle
" XPTemplate settings.
-if has('eval')
" Try to maintain snippet rendering even after editing outside of a
" snippet.
let g:xptemplate_strict = 0
@@ -363,6 +895,38 @@ if has('eval')
let g:xptemplate_brace_complete = 0
" Only highlight the current placeholder.
let g:xptemplate_highlight = 'current'
+
+" CtrlP settings.
+ " Don't manage the working directory (the default setting is too slow for
+ " me).
+ let g:ctrlp_working_path_mode = 0
+
+ " Path to cache directory. I prefer to keep generated files as local as
+ " possible.
+ let g:ctrlp_cache_dir = $HOME . '/.vim/cache/ctrlp'
+ " Permanent cache, cleared by a crontab entry. Use to update the
+ " cache manually.
+ let g:ctrlp_clear_cache_on_exit = 0
+
+ " Don't switch the window if the selected buffer is already open. I want
+ " to open another view on this buffer in most cases.
+ let g:ctrlp_switch_buffer = 0
+
+" FSWitch settings.
+ " Defaults don't work well for my projects.
+ augroup vimrc
+ autocmd BufEnter *.cc let b:fswitchdst = 'h'
+ \ | let b:fswitchlocs = './'
+ autocmd BufEnter *.h let b:fswitchdst = 'cc,c'
+ \ | let b:fswitchlocs = './'
+ augroup END
+
+ " Switch to corresponding header/source file.
+ nnoremap h :FSHere
+
+" netrw settings.
+ " Don't create ~/.vim/.netrwhist history file.
+ let g:netrw_dirhistmax = 0
endif
@@ -372,11 +936,10 @@ endif
" twice.
if has('autocmd')
augroup vimrc
- autocmd!
" Go to last position of opened files. Taken from :help last-position-jump.
autocmd BufReadPost *
- \ if line("'\"") > 1 && line("'\"") <= line("$") |
+ \ if line("'\"") > 1 && line("'\"") <= line('$') |
\ execute "normal! g'\"" |
\ endif
" But not for Git commits, go to beginning of the file.
@@ -395,8 +958,46 @@ if has('autocmd')
" Automatically disable 'paste' mode when leaving insert mode. Thanks to
" Raimondi in #vim on Freenode (2010-08-14 23:01 CEST). Very useful as I only
-" want to paste once and then 'paste' gets automatically unset.
- autocmd InsertLeave * set nopaste
+" want to paste once and then 'paste' gets automatically unset. InsertLeave
+" doesn't exist in older Vims. Use "*p to paste X11's selection, no need for
+" 'paste' in this case.
+ if exists('##InsertLeave')
+ autocmd InsertLeave * set nopaste
+ endif
+
+" Write all files when running :mak[e] before 'makeprg' is called.
+" QuickFixCmdPre doesn't exist in older Vims.
+ if exists('##QuickFixCmdPre')
+ autocmd QuickFixCmdPre * wall
+ endif
+
+" Don't ignore case while in insert mode, but ignore case in all other modes.
+" This causes / to honor the case and thus only complete matching
+" capitalization. But while searching (/) 'ignorecase' is used.
+" InsertEnter/InsertLeave doesn't exist in older Vims.
+ if exists('##InsertEnter') && exists('##InsertLeave')
+ autocmd InsertEnter * set noignorecase
+ autocmd InsertLeave * set ignorecase
+ endif
+
+" Display a warning when editing a file which contains "do not edit" (ignoring
+" the case) in the first lines of the file, for example template files which
+" were preprocessed or auto-generated files. Especially useful when the header
+" is not displayed on the first screen, e.g. when the old position is
+" restored.
+ function! s:SearchForDoNotEditHeader()
+ " Only search the first 20 lines to prevent false positives, e.g.
+ " in scripts which write files containing this warning and ignore
+ " the case (\c). (Can't use search()'s {stopline} as we might not
+ " start searching from the top.)
+ let l:match = search('\cdo not edit', 'n')
+ if l:match == 0 || l:match > 20
+ return
+ endif
+
+ echoerr 'Do not edit this file! (Maybe a template file.)'
+ endfunction
+ autocmd BufRead * call s:SearchForDoNotEditHeader()
" AFTER/FTPLUGIN AUTO COMMANDS
@@ -413,11 +1014,14 @@ if has('autocmd')
" the recommendation for git commit messages (http://tpope.net/node/106).
autocmd FileType gitcommit let g:secure_modelines_allowed_items = [] |
\ setlocal textwidth=72
-" Allow folding in perl.
- autocmd FileType perl let perl_fold = 1 |
- \ let perl_fold_blocks = 1
+" Fix 'include' setting for shell files to recognize '.' and 'source'
+" commands. Use &l:include instead of setlocal which requires excessive
+" escaping of \.
+ autocmd FileType sh let &l:include = '^\s*\(\.\|source\)\s\+'
" Use the same comment string as for Vim files in Vimperator files.
autocmd FileType vimperator setlocal commentstring=\"%s
+" Use TeX compiler for (La)TeX files.
+ autocmd FileType tex compiler tex
" FTDETECT AUTO COMMANDS
@@ -437,3 +1041,26 @@ if has('autocmd')
augroup END
endif
+
+
+" CUSTOM FUNCTIONS AND COMMANDS
+
+if has('eval')
+" Convenient command to see the difference between the current buffer and the
+" file it was loaded from, thus the changes you made. Thanks to the
+" vimrc_example.vim file in Vim's source. Modified to use the same filetype
+" for the diffed file as the filetype for the original file.
+ if !exists(':DiffOrig')
+ command DiffOrig
+ \ let s:diff_orig_filetype = &filetype
+ \ | vertical new
+ \ | let &filetype = s:diff_orig_filetype
+ \ | unlet s:diff_orig_filetype
+ \ | set buftype=nofile
+ \ | read ++edit #
+ \ | 0d_
+ \ | diffthis
+ \ | wincmd p
+ \ | diffthis
+ endif
+endif