]> ruderich.org/simon Gitweb - fcscs/fcscs.git/blobdiff - bin/fcscs
use helper function to reduce duplication in mappings
[fcscs/fcscs.git] / bin / fcscs
index 6741a91faff6cd2587c32bf4af6325110bc1da32..e0c8cb1a05d42eb6e38a678311972626c6b1c086 100755 (executable)
--- a/bin/fcscs
+++ b/bin/fcscs
@@ -64,6 +64,7 @@ Short overview of the general usage, details below:
         - f: file paths
         - i: IPs
         - u: URLs
+        - c: checksums (e.g. MD5, SHA1, ..)
         - ...
         - /: search mode
     - for `normal' modes:
@@ -366,6 +367,7 @@ package Screen {
                 $fh = undef; # a failed open still writes a value to $fh
                 return;
             }
+            $fh->autoflush(1);
         }
 
         foreach (@args) {
@@ -557,9 +559,6 @@ sub select_match {
             $number = int($number / 10);
         } elsif ($char eq "\n"
                 or $char eq $config->{setting}{alternative_return}) {
-            if ($number == 0) { # number without selection matches last entry
-                $number = 1;
-            }
             last;
 
         # Selecting a new mode requires falling through into the main input
@@ -569,7 +568,8 @@ sub select_match {
             return { key => $char };
         # All other mappings stay in the current mode.
         } elsif (defined (my $m = $config->{mapping}{simple}{$char})) {
-            $m->($char, $screen, $config, $input);
+            my $result = $m->($char, $screen, $config, $input);
+            last if defined $result->{select_match};
             next;
 
         } else {
@@ -584,6 +584,10 @@ sub select_match {
         $screen->draw_matches($config, $matches, \@remaining);
         $screen->refresh;
     }
+    # Number without selection matches last entry.
+    if ($number == 0) {
+        $number = 1;
+    }
 
     $screen->draw_matches($config, $matches, []); # remove matches
 
@@ -678,31 +682,43 @@ sub extend_match {
 }
 
 
-sub mapping_paste {
-    my ($key, $screen, $config, $input) = @_;
+sub mapping_state_helper {
+    my ($name, $flags, $key, $screen, $config, $input) = @_;
 
-    $screen->debug('mapping_paste', 'started');
+    $screen->debug("mapping_$name", 'started');
 
-    $config->{state}{handler} = $config->{handler}{paste};
+    $config->{state}{handler} = $config->{handler}{$name};
 
-    $screen->prompt(flags => 'P'); # paste
+    $screen->prompt(flags => $flags);
     $screen->draw_prompt($config);
     $screen->refresh;
 
     return {};
 }
-sub mapping_yank {
-    my ($key, $screen, $config, $input) = @_;
+sub mapping_state_now_helper {
+    my ($name, $key, $screen, $config, $input) = @_;
 
-    $screen->debug('mapping_yank', 'started');
+    $screen->debug("mapping_${name}_now", 'started');
 
-    $config->{state}{handler} = $config->{handler}{yank};
+    $config->{state}{handler} = $config->{handler}{$name};
 
-    $screen->prompt(flags => 'Y'); # yank
-    $screen->draw_prompt($config);
-    $screen->refresh;
+    return {
+        select_match => 1,
+    };
+}
 
-    return {};
+sub mapping_paste {
+    return mapping_state_helper('paste', 'P', @_);
+}
+sub mapping_paste_now {
+    return mapping_state_now_helper('paste', @_);
+}
+
+sub mapping_yank {
+    return mapping_state_helper('yank', 'Y', @_);
+}
+sub mapping_yank_now {
+    return mapping_state_now_helper('yank', @_);
 }
 
 
@@ -715,38 +731,34 @@ The following normal modes are available:
 
 =over 4
 
-=item B<path mode> select relative/absolute paths
+=item B<path mode>     select relative/absolute paths
+
+=item B<url mode>      select URLs
 
-=item B<url mode>  select URLs
+=item B<ip mode>       select IPv4 and IPv6 addresses
 
-=item B<ip mode>   select IPv4 and IPv6 addresses
+=item B<checksum mode> select checksums (MD5, SHA1, SHA256, SHA512)
 
 =back
 
 =cut
-sub mapping_mode_path {
-    my ($key, $screen, $config, $input) = @_;
+sub mapping_mode_helper {
+    my ($name, $select, $key, $screen, $config, $input) = @_;
 
-    $screen->debug('mapping_mode_path', 'started');
+    $screen->debug("mapping_mode_$name", 'started');
 
-    my @matches = get_regex_matches($input, $config->{regex}{path});
+    my @matches = get_regex_matches($input, $config->{regex}{$name});
     return {
-        select  => 'path select',
+        select  => $select,
         matches => \@matches,
-        handler => $config->{handler}{yank},
+        handler => $config->{handler}{$name},
     };
 }
+sub mapping_mode_path {
+    return mapping_mode_helper('path', 'path select', @_);
+}
 sub mapping_mode_url {
-    my ($key, $screen, $config, $input) = @_;
-
-    $screen->debug('mapping_mode_url', 'started');
-
-    my @matches = get_regex_matches($input, $config->{regex}{url});
-    return {
-        select  => 'url select',
-        matches => \@matches,
-        handler => $config->{handler}{url},
-    };
+    return mapping_mode_helper('url', 'url select', @_);
 }
 sub mapping_mode_ip {
     my ($key, $screen, $config, $input) = @_;
@@ -761,6 +773,9 @@ sub mapping_mode_ip {
         handler => $config->{handler}{ip},
     };
 }
+sub mapping_mode_checksum {
+    return mapping_mode_helper('checksum', 'checksum select', @_);
+}
 
 =head2 SEARCH MODE (AND EXTEND MODE)
 
@@ -1052,6 +1067,8 @@ them in parentheses):
 
 =item B<i> select IPv4 and IPv6 addresses (C<\&mapping_mode_ip>)
 
+=item B<c> select checksums (e.g. MD5, SHA) (C<\&mapping_mode_checksum>)
+
 =item B</> search for regex to get selection (C<\&mapping_mode_search>)
 
 =item B<q> quit fcscs (C<\&mapping_quit>)
@@ -1064,8 +1081,12 @@ The following simple mappings are available by default:
 
 =item B<p> enable pasting (C<\&mapping_paste>)
 
+=item B<P> paste current selection (like C<\n> but paste) (C<\&mapping_paste_now>)
+
 =item B<y> enable yanking (copying) (C<\&mapping_yank>)
 
+=item B<Y> yank current selection (like C<\n> but yank) (C<\&mapping_yank_now>)
+
 =back
 
 Note that yanking only uses the GNU screen or Tmux paste buffer by default. To
@@ -1101,12 +1122,15 @@ my %mapping_mode = (
     f   => \&mapping_mode_path,
     u   => \&mapping_mode_url,
     i   => \&mapping_mode_ip,
+    c   => \&mapping_mode_checksum,
     '/' => \&mapping_mode_search,
     q   => \&mapping_quit,
 );
 my %mapping_simple = (
     p => \&mapping_paste,
+    P => \&mapping_paste_now,
     y => \&mapping_yank,
+    Y => \&mapping_yank_now,
 );
 
 =head2 ATTRIBUTES
@@ -1156,7 +1180,7 @@ Defaults in parentheses.
 
 =item B<initial_mode>       start in this mode, must be a valid mode mapping (C<\&mapping_mode_url>)
 
-=item B<multiplexer>        set multiplexer ("screen" or "tmux") if not autodetected (C<undef>)
+=item B<multiplexer>        set multiplexer ("screen" or "tmux"), defaults to autodetection (C<undef>)
 
 =item B<ignorecase>         ignore case when searching (C<0>)
 
@@ -1224,6 +1248,8 @@ my %regex = (
     # enough.
     ipv4 => qr!\b(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}(?:/\d{1,2})?)\b!,
     ipv6 => qr!\b((?:[0-9a-fA-F]{1,4})?(?::+[0-9a-fA-F]{1,4})+(?:/\d{1,3})?)\b!,
+    # MD5, SHA1, SHA256, SHA512
+    checksum => qr!\b([0-9a-fA-F]{32}|[0-9a-fA-F]{40}|[0-9a-fA-F]{64}|[0-9a-fA-F]{128})\b!,
 );
 
 =head2 HANDLERS
@@ -1234,13 +1260,17 @@ The following handlers are available, defaults in parentheses.
 
 =over
 
-=item B<yank>  used to yank (copy) selection to paste buffer (C<\&handler_yank>)
+=item B<yank>     used to yank (copy) selection to paste buffer (C<\&handler_yank>)
+
+=item B<paste>    used to paste selection into window (C<\&handler_paste>)
+
+=item B<path>     used to handle paths (C<\&handler_yank>)
 
-=item B<paste> used to paste selection into window (C<\&handler_paste>)
+=item B<url>      used to open URLs (e.g. in a browser) (C<\&handler_url>)
 
-=item B<url>   used to open URLs (e.g. in a browser) (C<\&handler_url>)
+=item B<ip>       used to handle IPs (C<\&handler_yank>)
 
-=item B<ip>    used to handle IPs (C<\&handler_yank>)
+=item B<checksum> used to handle checksums (C<\&handler_yank>)
 
 =back
 
@@ -1261,10 +1291,12 @@ Example:
 
 =cut
 my %handler = (
-    yank  => \&handler_yank,
-    paste => \&handler_paste,
-    url   => \&handler_url,
-    ip    => \&handler_yank,
+    yank     => \&handler_yank,
+    paste    => \&handler_paste,
+    path     => \&handler_yank,
+    url      => \&handler_url,
+    ip       => \&handler_yank,
+    checksum => \&handler_yank,
 );
 
 my %state = (
@@ -1287,10 +1319,13 @@ Create a new Curses attribute with the given fore- and background color.
     mapping_mode_path()
     mapping_mode_url()
     mapping_mode_ip()
+    mapping_mode_checksum()
     mapping_mode_search()
 
     mapping_paste()
+    mapping_paste_now()
     mapping_yank()
+    mapping_yank_now()
     mapping_quit()
 
 Used as mappings, see L</MAPPINGS> above.
@@ -1306,7 +1341,8 @@ Used as handler to yank, paste selection or open URL in browser.
     run_command()
     run_in_background()
 
-Helper functions when writing custom mappings, see the source for details.
+Helper functions when writing custom mappings, see the source and example for
+details.
 
 Example:
 
@@ -1336,7 +1372,7 @@ Example:
         }
 
         return $result;
-    }
+    };
     # Also update initial mode to use our new "URL mode".
     $config{setting}{initial_mode} = $config{mapping}{mode}{u};
 
@@ -1350,8 +1386,6 @@ Example:
         });
     };
 
-
-
 =cut
 
 # All variables and functions which are usable by ~/.fcscsrc.
@@ -1364,18 +1398,19 @@ package Fcscs {
     sub mapping_mode_path { return main::mapping_mode_path(@_); }
     sub mapping_mode_url { return main::mapping_mode_url(@_); }
     sub mapping_mode_ip { return main::mapping_mode_ip(@_); }
+    sub mapping_mode_checksum { return main::mapping_mode_checksum(@_); }
     sub mapping_mode_search { return main::mapping_mode_search(@_); }
 
     sub mapping_paste { return main::mapping_paste(@_); }
+    sub mapping_paste_now { return main::mapping_paste_now(@_); }
     sub mapping_yank { return main::mapping_yank(@_); }
+    sub mapping_yank_now { return main::mapping_yank_now(@_); }
     sub mapping_quit { return main::mapping_quit(@_); }
 
     sub handler_yank { return main::handler_yank(@_); }
     sub handler_paste { return main::handler_paste(@_); }
     sub handler_url { return main::handler_url(@_); }
 
-    sub debug { return main::debug(@_); }
-
     sub get_regex_matches { return main::get_regex_matches(@_); }
     sub select_match { return main::select_match(@_); }
 
@@ -1415,10 +1450,10 @@ package Fcscs {
         }
         # Make sure the file is not writable by other users. Doesn't handle
         # ACLs and see comment above about race conditions.
-        my @stat = stat $path or die $!;
+        my @stat = stat $path or $screen->die("Config '$decoded': $!");
         my $mode = $stat[2];
         if (($mode & Fcntl::S_IWGRP) or ($mode & Fcntl::S_IWOTH)) {
-            die "Config '$decoded' must not be writable by other users.";
+            $screen->die("Config '$decoded' must not be writable by other users.");
         }
 
         my $result = do $path;