# Zsh configuration file.
+# Copyright (C) 2011-2012 Simon Ruderich
+#
+# This file is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This file is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this file. If not, see <http://www.gnu.org/licenses/>.
+
source_debug ". ~/.zsh/rc"
# Simulate hooks using _functions arrays for Zsh versions older than 4.3.4. At
# the moment only precmd(), preexec() and chpwd() are simulated.
-#
-# At least 4.3.4 (not sure about later versions) has an error in add-zsh-hook
-# so the compatibility version is used there too.
-if [[ $ZSH_VERSION != (4.3.<5->|4.<4->*|<5->*) ]]; then
- # Provide add-zsh-hook which was added in 4.3.4.
- fpath=(~/.zsh/functions/compatibility $fpath)
-
+if [[ $ZSH_VERSION != (4.3.<4->*|4.<4->*|<5->*) ]]; then
# Run all functions defined in the ${precmd,preexec,chpwd}_functions
# arrays.
function precmd() {
}
fi
-# Autoload add-zsh-hook to add/remove zsh hook functions easily.
-autoload -Uz add-zsh-hook
-
# Load zmv (zsh move) which is a powerful file renamer.
autoload -Uz zmv
# vcs_info was added in 4.3.9 but it works in earlier versions too. So load it
# if the necessary files are available in ~/.zsh/functions/vcs_info (often a
# symbolic link to current checkout of Zsh's sources).
-if [[ $ZSH_VERSION == (4.3.<9->|4.<4->*|<5->*) ||
+if [[ $ZSH_VERSION == (4.3.<9->*|4.<4->*|<5->*) ||
-d ~/.zsh/functions/vcs_info ]]; then
# Update fpath to allow loading the vcs_info functions.
if [[ -d ~/.zsh/functions/vcs_info ]]; then
# is displayed. If there is an special action going on (merge, rebase)
# it's also displayed (red). Also display if there are unstaged or staged
# (%u/%c) changes.
- if [[ $ZSH_VERSION == (4.3.<11->|4.<4->*|<5->*) ||
+ if [[ $ZSH_VERSION == (4.3.<11->*|4.<4->*|<5->*) ||
-d ~/.zsh/functions/vcs_info ]]; then
zstyle ':vcs_info:*' formats \
"($green%b%u%c$default:$blue%s$default)"
prompt_chpwd() {
FORCE_RUN_VCS_INFO=1
}
- add-zsh-hook chpwd prompt_chpwd
+ chpwd_functions+=(prompt_chpwd)
# Used by prompt code below to determine if vcs_info should be run.
RUN_VCS_INFO=1
$green%B%n%b$default@$green%B%m%b$default %(1j.$yellow%j$default.)%# \
%(?..($red%B%?%b$default%) )"
}
-add-zsh-hook precmd prompt_precmd
+precmd_functions+=(prompt_precmd)
-# When screen, xterm or rxvt is used set the name of the window to the
+# When screen, tmux, xterm or rxvt is used set the name of the window to the
# currently running program.
#
# When a program is started preexec() sets the window's name to it; when it
# stops precmd() resets the window's name to 'zsh'. 'fg' is supported and sets
# the window's name to the resumed job.
#
-# It works with screen, xterm and rxvt.
+# It works with screen, tmux, xterm and rxvt.
#
# If a command is run with sudo or if the shell is running as root then a ! is
# added at the beginning of the command to make this clear. If a command is
# running on a different computer with ssh a @ is added at the beginning. If
-# screen is running on the remote machine instead of @screen @:hostname
-# (hostname replaced by the machine's hostname) is displayed. This only works
-# if the .zshrc on the server also uses this command.
+# screen/tmux is running on the remote machine instead of @screen @:hostname
+# (or @tmux ..; hostname replaced by the machine's hostname) is displayed.
+# This only works if the .zshrc on the server also uses this command.
#
# screen* is necessary as `screen` uses screen.linux for example for a linux
# console.
# Replace fg with the resumed job name.
if [[ $program_name == fg ]]; then
program_name=${jobtexts[%+]}
- elif [[ $program_name == fg* ]]; then
+ elif [[ $program_name == fg\ * ]]; then
program_name=${jobtexts[${program_name#fg }]}
fi
# If screen is running in SSH then display "@:hostname" as title
# in the term/outer screen.
- if [[ $program_name == @screen ]]; then
+ if [[ $program_name == @screen || $program_name == @tmux ]]; then
program_name="@:${HOST//.*/}"
# Use "@:!hostname" for root screens.
- elif [[ $program_name == @!screen ]]; then
+ elif [[ $program_name == @!screen || $program_name == @!tmux ]]; then
program_name="@:!${HOST//.*/}"
fi
fi
window_reset=
}
- # Sets the window title. Works with screen, xterm and rxvt. (V) escapes
- # all non-printable characters. Thanks to Mikachu in #zsh on Freenode
- # (2010-08-07 17:09 CEST).
+ # Sets the window title. Works with screen, tmux (which uses screen as
+ # TERM), xterm and rxvt. (V) escapes all non-printable characters. Thanks
+ # to Mikachu in #zsh on Freenode (2010-08-07 17:09 CEST).
if [[ $TERM == screen* ]]; then
window_title() {
print -n "\ek${(V)1}\e\\"
fi
# Add the preexec() and precmd() hooks.
- add-zsh-hook preexec window_preexec
- add-zsh-hook precmd window_precmd
+ preexec_functions+=(window_preexec)
+ precmd_functions+=(window_precmd)
else
# Fallback if another TERM is used, necessary to run screen (see below in
# "RUN COMMANDS").
zstyle ':completion:::::' completer \
_expand _complete _prefix _ignored _approximate
-# Try uppercase if the currently typed string doesn't match. This allows
-# typing in lowercase most of the time and completion fixes the case. Don't
-# perform these fixes in _approximate to prevent it from changing the input
-# too much. Thanks to the book "From Bash to Z Shell" page 249.
+# Match specification to be tried when completing items. Each group ('...') is
+# tried after another if no matches were found, once matches are found no
+# other groups are tried. Thanks to Mikachu in #zsh on Freenode (2012-08-28
+# 18:48 CEST) for explanations.
+#
+# When matching also include the uppercase variant of typed characters
+# ('m:{a-z}={A-Z}'); using '' before this group would try the unmodified match
+# first, but I prefer to get all matches immediately (e.g. if Makefile and
+# makefile exist in the current directory echo m<tab> matches both, with '' it
+# would only match makefile because it found one match). This allows typing in
+# lowercase most of the time and completion fixes the case, which is faster.
+#
+# Don't perform these fixes in _approximate to prevent it from changing the
+# input too much. Thanks to the book "From Bash to Z Shell" page 249.
zstyle ':completion:*:(^approximate):*' matcher-list 'm:{a-z}={A-Z}'
# Allow one mistake per three characters. Thanks to the book "From Bash to Z
# is no longer displayed. Display current position in percent (%p).
zstyle ':completion:*:default' list-prompt '%p'
# Display group name (%d) (like 'external command', 'alias', etc.), in bold.
-# Also display a message if _approximate found errors and if no matches were
+# Also display a message if _approximate found errors and no matches were
# found.
zstyle ':completion:*' format ' %B%d%b:'
zstyle ':completion:*:corrections' format ' %B%d%b (errors: %e)'
# <nyh@math.technion.ac.il> for a fix (-r) to handle whitespace/quotes
# correctly, both on the Zsh mailing list.
TRAPINT() {
+ # Don't store this line in history if histignorespace is enabled and the
+ # line starts with a space.
+ if [[ -o histignorespace && ${BUFFER[1]} = " " ]]; then
+ return $1
+ fi
+
# Store the current buffer in the history.
zle && print -s -r -- $BUFFER
# Make sure aliases are expanded when using sudo.
alias sudo='sudo '
-# Global aliases for often used commands in the command line.
+# Global aliases for often used redirections.
alias -g E='2>&1'
-alias -g L='E | less'
-alias -g D='E | colordiff L'
+alias -g N='>/dev/null'
+alias -g EN='2>/dev/null'
+alias -g L='2>&1 | less'
+alias -g LS='2>&1 | less -S' # -S prevents wrapping of long lines
+alias -g D='2>&1 | colordiff | less'
+# Global aliases for often used commands in the command line.
+alias -g A='| awk'
alias -g G='| grep'
-alias -g S='| sort'
-alias -g U='| uniq'
alias -g H='| head'
+alias -g P='| perl'
+alias -g S='| sort'
alias -g T='| tail'
+alias -g U='| uniq'
# Make going up directories simple.
alias -g ...='../..'
# Display all branches (except stash) in gitk but only 200 commits as this is
# much faster. Also put in the background and disown. Thanks to drizzd in #git
# on Freenode (2010-04-03 17:55 CEST).
-gitk() {
+(( $+commands[gitk] )) && gitk() {
command gitk --max-count=200 --branches --remotes --tags "$@" &
disown %command
}
# Same for tig (except the disown part as it's no GUI program).
-tig() {
+(( $+commands[tig] )) && tig() {
command tig --max-count=200 --branches --remotes --tags "$@"
}
# Pipe output through less.
-tree() {
+(( $+commands[tree] )) && tree() {
command tree -C "$@" | less
}
-# Automatically disown.
-xpdf() {
- command xpdf "$@" &
- disown %command
-}
+# Choose the "best" PDF viewer available: xpdf, then zathura (in the past
+# zathura was preferred, but recent versions are completely broken: still no
+# working search and no page-wise scrolling anymore). Also setup completion
+# for `pdf`.
+if (( $+commands[xpdf] )); then
+ pdf() {
+ command xpdf "$@" 2>/dev/null &
+ disown %command
+ }
+ compdef _xpdf pdf
+elif (( $+commands[zathura] )); then
+ pdf() {
+ command zathura "$@" 2>/dev/null &
+ disown %command
+ }
+ # No completion for zathura yet.
+ compdef _xpdf pdf
+fi
# GHCI doesn't use readline, force it if rlwrap is available.
(( $+commands[rlwrap] )) && ghci() {
# LOAD ADDITIONAL CONFIGURATION FILES
+# Configuration option for rc.local to use GNU screen/tmux. By default GNU
+# screen is used. Possible values: screen, tmux.
+use_multiplexer=screen
+
source_config ~/.zsh/rc.local
# RUN COMMANDS
-# If not already in screen reattach to a running session or create a new one.
-# This also starts screen on a remote server when connecting through ssh.
-if [[ $TERM != dumb && $TERM != linux && -z $STY ]]; then
+# If not already in screen or tmux, reattach to a running session or create a
+# new one. This also starts screen/tmux on a remote server when connecting
+# through ssh.
+if [[ $TERM != dumb && $TERM != linux && -z $STY && -z $TMUX ]]; then
# Get running detached sessions.
- session=$(screen -list | grep 'Detached' | awk '{ print $1; exit }')
+ if [[ $use_multiplexer = screen ]]; then
+ session=$(screen -list | grep 'Detached' | awk '{ print $1; exit }')
+ elif [[ $use_multiplexer = tmux ]]; then
+ session=$(tmux list-sessions 2>/dev/null \
+ | sed '/(attached)$/ d; s/^\([0-9]\{1,\}\).*$/\1/; q')
+ fi
# As we exec later we have to set the title here.
- window_preexec "screen"
+ if [[ $use_multiplexer = screen ]]; then
+ window_preexec "screen"
+ elif [[ $use_multiplexer = tmux ]]; then
+ window_preexec "tmux"
+ fi
# Create a new session if none is running.
if [[ -z $session ]]; then
- exec screen
+ if [[ $use_multiplexer = screen ]]; then
+ exec screen
+ elif [[ $use_multiplexer = tmux ]]; then
+ exec tmux
+ fi
# Reattach to a running session.
else
- exec screen -r $session
+ if [[ $use_multiplexer = screen ]]; then
+ exec screen -r $session
+ elif [[ $use_multiplexer = tmux ]]; then
+ exec tmux attach-session -t $session
+ fi
fi
fi
# cases it doesn't work, the E alias can be used as workaround.
#
# Moved in the "run commands" section to prevent one unnecessary zsh process
-# when starting screen (see above).
+# when starting screen/tmux (see above).
exec 2>>(while read -r -k -u 0 line; do
printf '\e[91m%s\e[0m' "$line";
print -n $'\0';
done &)
-# Run reminder and redisplay it every four hours (if it's available).
+# Run the following programs every 4 hours.
PERIOD=14400
periodic() {
- which rem > /dev/null && [ -f ~/.reminders ] && rem -h
+ # Display fortunes.
+ (( $+commands[fortune] )) && fortune -ac
+ # Display reminders.
+ (( $+commands[rem] )) && [ -f ~/.reminders ] && rem -h
}
ruderich.org/simon / config / dotfiles.git / blobdiff