# arrays.
function precmd() {
for function in $precmd_functions; do
- $function $@
+ $function "$@"
done
}
function preexec() {
for function in $preexec_functions; do
- $function $@
+ $function "$@"
done
}
function chpwd() {
for function in $chpwd_functions; do
- $function $@
+ $function "$@"
done
}
fi
setopt incappendhistory
# If the same command is run multiple times store it only once in the history.
setopt histignoredups
+# Don't add lines starting with a space to the history.
+setopt histignorespace
# Vim like completions of previous executed commands (also enter Vi-mode). If
# called at the beginning it just recalls old commands (like cursor up), if
# called after typing something, only lines starting with the typed text are
zstyle ':vcs_info:*' enable git hg
# Check the repository for changes so they can be used in %u/%c (see
# below). This comes with a speed penalty for bigger repositories.
- zstyle ':vcs_info:*' check-for-changes true
+ zstyle ':vcs_info:*' check-for-changes yes
# Set style of vcs_info display. The current branch (green) and VCS (blue)
# is displayed. If there is an special action going on (merge, rebase)
# currently running program.
#
# When a program is started preexec() sets the window's name to it; when it
-# stops precmd() resets the window's name to 'zsh'.
+# stops precmd() resets the window's name to 'zsh'. 'fg' is supported and sets
+# the window's name to the resumed job.
#
# It works with screen, xterm and rxvt.
#
program_name=${program_name#sudo }
program_sudo=yes
fi
+
+ # Replace fg with the resumed job name.
+ if [[ $program_name == fg ]]; then
+ program_name=${jobtexts[%+]}
+ elif [[ $program_name == fg* ]]; then
+ program_name=${jobtexts[${program_name#fg }]}
+ fi
+
# Remove all arguments from the program name.
program_name=${program_name%% *}
autoload -Uz compinit && compinit -d ~/.zsh/cache/zcompdump
# Use cache to speed up some slow completions (dpkg, perl modules, etc.).
-zstyle ':completion:*' use-cache on
+zstyle ':completion:*' use-cache yes
zstyle ':completion:*' cache-path ~/.zsh/cache
-# Complete arguments and fix spelling mistakes when possible.
-zstyle ':completion:*' completer _complete _match _correct _approximate
-
+# Let the completion system handle all completions, including expanding of
+# shell wildcards (which is handled by other shell mechanisms if the default
+# expand-or-complete is used).
+bindkey '^I' complete-word
# If there are multiple matches after pressing <Tab> always display them
-# immediately without requiring another <Tab>. a<Tab> lists aaa, aab, aac as
-# possible completions if the directory contains aaa, aab, aac, bbb.
+# immediately without requiring another <Tab>. a<Tab> completes to aa and
+# lists aaa, aab, aac as possible completions if the directory contains aaa,
+# aab, aac, bbb instead of only completing to aa.
setopt nolistambiguous
-# Allow completions in the middle of a text, i.e. "/usr/bin/<TAB>whatever"
-# completes like "/usr/bin/<TAB>". Useful when adding new options to commands.
-bindkey '^I' expand-or-complete-prefix
+# Support completions in the middle of a word, without this option zsh jumps
+# to the end of the word before the completion process begins. Is required for
+# the _prefix completer.
+setopt completeinword
+
+zstyle ':completion:::::' completer \
+ _expand _complete _prefix _ignored _approximate
+
# Try uppercase if the currently typed string doesn't match. This allows
-# typing in lowercase most of the time and completion fixes the case.
-zstyle ':completion:*' matcher-list '' 'm:{a-z}={A-Z}'
+# typing in lowercase most of the time and completion fixes the case. Don't
+# perform these fixes in _approximate to prevent it from changing the input
+# too much. Thanks to the book "From Bash to Z Shell" page 249.
+zstyle ':completion:*:(^approximate):*' matcher-list 'm:{a-z}={A-Z}'
+
+# Allow one mistake per three characters. Thanks to the book "From Bash to Z
+# Shell" page 248.
+zstyle -e ':completion:*:approximate:*' max-errors \
+ 'reply=( $(( ($#PREFIX + $#SUFFIX) / 3 )) )'
+
+# Expand shell wildcards to all matching files after <Tab>. echo *<Tab>
+# results in a b c if the directory contains the files a, b, c. Thanks to the
+# book "From Bash to Z Shell" page 246.
+zstyle ':completion:*:expand:*' tag-order all-expansions
+# Keep prefixes unexpanded if possible: $HOME/<Tab> doesn't expand $HOME,
+# while $HOME<Tab> does.
+zstyle ':completion:*:expand:*' keep-prefix yes
+
+# When completing multiple path components display all matching ambiguous
+# components. For example /u/s/d/r/README<Tab> lists all matching READMEs
+# instead of just the matching paths up to the r/ component. Can be slow if
+# there are many matching files.
+zstyle ':completion:*' list-suffixes yes
# Use ls-like colors for completions.
zstyle ':completion:*' list-colors ${(s.:.)LS_COLORS}
# Make completion lists scrollable so "do you wish to see all n possibilities"
# is no longer displayed. Display current position in percent (%p).
-zstyle ':completion:*' list-prompt '%p'
+zstyle ':completion:*:default' list-prompt '%p'
# Display group name (%d) (like 'external command', 'alias', etc.), in bold.
-zstyle ':completion:*' format ' %B%d%b:'
+# Also display a message if _approximate found errors and if no matches were
+# found.
+zstyle ':completion:*' format ' %B%d%b:'
+zstyle ':completion:*:corrections' format ' %B%d%b (errors: %e)'
+zstyle ':completion:*:warnings' format ' %Bno matches for %d%b'
# Display different types of matches separately.
zstyle ':completion:*' group-name ''
+# Separate man pages by section.
+zstyle ':completion:*' separate-sections yes
+
# Don't draw trailing / in bold (new in zsh 4.3.11). Thanks to Mikachu in #zsh
# on Freenode for the fix (2010-12-17 13:46 CET).
zle_highlight=(suffix:none)
zstyle ':completion:*:functions' ignored-patterns '_*'
# Ignore parent directory.
zstyle ':completion:*:(cd|mv|cp):*' ignore-parents parent pwd
-# Always complete one value (file name) only once in the current line. This
-# makes it easy to complete multiple values because I can just press tab to
-# get all possible values. Otherwise I would have to skip the first value
-# again and again.
-zstyle ':completion:*' ignore-line yes
+# Always complete file names only once in the current line. This makes it easy
+# to complete multiple file names because I can just press tab to get all
+# possible values. Otherwise I would have to skip the first value again and
+# again. Thanks to Mikachu in #zsh on Freenode (2011-08-11 14:42 CEST) for the
+# hint to use other. other is necessary so prefix<Tab> lists both prefix and
+# prefixrest if the directory contains prefix and prefixrest.
+zstyle ':completion:*:all-files' ignore-line other
# Except for mv and cp, because I often want to use to similar names, so I
# complete to the same and change it.
-zstyle ':completion:*:(mv|cp):*' ignore-line no
+zstyle ':completion:*:(mv|cp):all-files' ignore-line no
+
# Don't complete ./config.* files, this makes running ./configure much
# simpler. Thanks to Nomexous in #zsh on Freenode (2010-03-16 01:54 CET)
zstyle ':completion:*:*:-command-:*' ignored-patterns './config.*'
-
# Don't complete unwanted files with Vim. Thanks to Nomexous in #zsh on
# Freenode (2010-06-06 04:54 CEST). See below for a way to complete them.
zstyle ':completion:*:*:vim:*:all-files' ignored-patterns \
alias clear='clear; window_reset=yes; window_precmd reset'
fi
+
+# CUSTOM COMMANDS
+
# Display all branches (except stash) in gitk but only 200 commits as this is
-# much faster. Also put in the background and disown. Thanks to sitaram in
-# #git on Freenode (2009-04-20 15:51).
+# much faster. Also put in the background and disown. Thanks to drizzd in #git
+# on Freenode (2010-04-03 17:55 CEST).
gitk() {
- command gitk \
- --max-count=200 \
- $(git rev-parse --symbolic-full-name --remotes --branches) \
- $@ &
+ command gitk --max-count=200 --branches --remotes --tags "$@" &
disown %command
}
# Same for tig (except the disown part as it's no GUI program).
tig() {
- command tig \
- --max-count=200 \
- $(git rev-parse --symbolic-full-name --remotes --branches) \
- $@
+ command tig --max-count=200 --branches --remotes --tags "$@"
}
# Pipe output through less.
disown %command
}
+# GHCI doesn't use readline, force it if rlwrap is available.
+(( $+commands[rlwrap] )) && ghci() {
+ command rlwrap \
+ --always-readline --complete-filenames -t dumb \
+ --histsize 5000 \
+ --file ~/.shell/rlwrap/ghci \
+ ghci "$@" 2>&1
+}
+
# OS SPECIFIC SETTINGS
ruderich.org/simon / config / dotfiles.git / blobdiff