# Zsh configuration file.
-source_debug "sourcing ~/.zsh/rc"
+source_debug ". ~/.zsh/rc"
# MISCELLANEOUS SETTINGS
# called at the beginning it just recalls old commands (like cursor up), if
# called after typing something, only lines starting with the typed are
# returned. Very useful to get old commands quickly. Thanks to Mikachu in #zsh
-# on Freenode (2010-01-17 12:47) for the information how to a use function
+# on Freenode (2010-01-17 12:47 CET) for the information how to a use function
# with bindkey.
zle -N my-vi-history-beginning-search-backward
my-vi-history-beginning-search-backward() {
# Use colorized output, necessary for prompts and completions.
autoload -U colors && colors
+# Necessary for $EPOCHSECONDS, the UNIX time.
+zmodload zsh/datetime
+
# Some shortcuts for colors. The %{...%} tells zsh that the data in between
# doesn't need any space, necessary for correct prompt draw.
local red="%{${fg[red]}%}"
# changes are detected in the repository; check-for-changes must be set to
# true for this to work. Thanks to Bart Trojanowski
# (http://jukie.net/~bart/blog/pimping-out-zsh-prompt) for the idea
- # (2010-03-11 00:20).
+ # (2010-03-11 00:20 CET).
zstyle ':vcs_info:*' unstagedstr '¹'
zstyle ':vcs_info:*' stagedstr '²'
# Set the prompt. A two line prompt is used. On the top left the current
# working directory is displayed, on the right vcs_info (if available). On the
-# bottom left current username and host is shown, the exit code of the last
+# bottom left current user name and host is shown, the exit code of the last
# command if it wasn't 0, the number of running jobs if not 0.
#
# The prompt is in green and blue to make easily detectable, the error exit
# code in red and bold and the job count in yellow.
#
# Thanks to Adam's prompt for the basic idea of this prompt.
+#
+# The current time is display in hex in the right prompt.
prompt_precmd() {
# Regex to remove elements which take no space. Used to calculate the
# width of the top prompt. Thanks to Bart's and Adam's prompt code in
local width width_left width_right
local top_left top_right
- # Display vcs_info (if used) on the right in the top prompt.
- top_right="${vcs_info_msg_0_}"
+ # Display the current time in HEX in bright blue and vcs_info (if used) on
+ # the right in the top prompt.
+ top_right="$vcs_info_msg_0_($blue%B0x$(([##16] EPOCHSECONDS))%b$default)"
width_right=${#${(S%%)top_right//$~zero/}}
- # Remove vcs_info if it would get too long.
+ # Remove it if it would get too long.
if [[ $(( COLUMNS - 4 - 1 - width_right )) -lt 0 ]]; then
top_right=
width_right=0
$blue%B'%b$default\
$green%B%n%b$default@$green%B%m%b$default %(1j.$yellow%j$default.)%# \
%(?..($red%B%?%b$default%) )"
-
}
add-zsh-hook precmd prompt_precmd
# precmd() call.
window_reset=yes
# Is set to a non empty value when the shell is running as root.
- if [[ $(id -u) -eq 0 ]]; then
+ if [[ $UID -eq 0 ]]; then
window_root=yes
fi
# Ignore often used commands which are only running for a very short
# time. This prevents a "blinking" name when it's changed to "cd" for
# example and then some milliseconds later back to "zsh".
- [[ $program_name == (cd*|ls|la|ll|clear|c) ]] && return
+ [[ $program_name == (cd*|d|ls|l|la|ll|clear|c) ]] && return
# Change my shortcuts so the real name of the program is displayed.
case $program_name in
# If screen is running in SSH then display "@:hostname" as title
# in the term/outer screen.
if [[ $program_name == @screen ]]; then
- program_name="@:${$(hostname)//.*/}"
+ program_name="@:${HOST//.*/}"
# Use "@:!hostname" for root screens.
elif [[ $program_name == @!screen ]]; then
- program_name="@:!${$(hostname)//.*/}"
+ program_name="@:!${HOST//.*/}"
fi
fi
window_reset=
}
- # Sets the window title. Works with screen, xterm and rxvt.
+ # Sets the window title. Works with screen, xterm and rxvt. (V) escapes
+ # all non-printable characters. Thanks to Mikachu in #zsh on Freenode
+ # (2010-08-07 17:09 CEST).
if [[ $TERM == screen* ]]; then
window_title() {
- print -n "\ek$1\e\\"
+ print -n "\ek${(V)1}\e\\"
}
elif [[ $TERM == xterm* || $TERM == rxvt* ]]; then
window_title() {
- print -n "\e]2;$1\e\\"
+ print -n "\e]2;${(V)1}\e\\"
}
else
# Fallback if another TERM is used.
zmodload zsh/complist
# Use new completion system, store dumpfile in ~/.zsh/cache to prevent
# cluttering of ~/. $fpath must be set before calling this. Thanks to Adlai in
-# #zsh on Freenode (2009-08-07 21:05) for reminding me of the $fpath problem.
+# #zsh on Freenode (2009-08-07 21:05 CEST) for reminding me of the $fpath
+# problem.
autoload -U compinit && compinit -d ~/.zsh/cache/zcompdump
# Use cache to speed up completions.
# Display different types of matches separately.
zstyle ':completion:*' group-name ''
+# Don't draw trailing / in bold (new in zsh 4.3.11). Thanks to Mikachu in #zsh
+# on Freenode for the fix (2010-12-17 13:46 CET).
+zle_highlight=(suffix:none)
+
# Ignore completion functions.
zstyle ':completion:*:functions' ignored-patterns '_*'
# Ignore parent directory.
# Except for mv and cp, because I often want to use to similar names, so I
# complete to the same and change it.
zstyle ':completion:*:(mv|cp):*' ignore-line no
+# Don't complete ./config.* files, this makes running ./configure much
+# simpler. Thanks to Nomexous in #zsh on Freenode (2010-03-16 01:54 CET)
+zstyle ':completion:*:*:-command-:*' ignored-patterns './config.*'
+
+# Don't complete unwanted files with Vim. Thanks to Nomexous in #zsh on
+# Freenode (2010-06-06 04:54 CEST). See below to complete them.
+zstyle ':completion:*:*:vim:*:all-files' ignored-patterns '*.aux' '*.log' \
+ '*.pdf' '*.class'
+
+# Provide a fallback completer which always completes files. Useful when Zsh's
+# completion is too "smart". Thanks to Frank Terbeck <ft@bewatermyfriend.org>
+# (http://www.zsh.org/mla/users/2009/msg01038.html).
+zle -C complete-files complete-word _generic
+zstyle ':completion:complete-files:*' completer _files
+bindkey '^F' complete-files
# CUSTOM ALIASES AND FUNCTIONS
return $1
}
-# Colorize stderr. Very useful when looking for errors. Thanks to
-# http://gentoo-wiki.com/wiki/Zsh for the basic script and Mikachu in #zsh on
-# Freenode (2010-03-07 04:03) for some improvements (-r, printf). It's not yet
-# perfect and doesn't work with su and git for example, but it can handle most
-# interactive output quite well (even with no trailing new line) and in those
-# cases the E alias can be used as workaround.
-exec 2>>(while read -r -k -u 0 line; do
- printf '\e[91m%s\e[0m' "$line";
- print -n $'\0';
-done &)
-
# Load aliases and similar functions also used by other shells.
if [[ -f ~/.shell/aliases ]]; then
. ~/.shell/aliases
$@
}
+# Pipe output through less.
+tree() {
+ command tree -C "$@" | less
+}
-# OS SPECIFIC SETTINGS
+# Automatically disown.
+xpdf() {
+ command xpdf "$@" &
+ disown %command
+}
-local uname=$(uname)
-if [[ $uname == Linux ]]; then
+# OS SPECIFIC SETTINGS
+
+if [[ $OSTYPE == linux* ]]; then
# Settings when creating Debian packages.
DEBEMAIL=simon@ruderich.org
export DEBEMAIL
DEBFULLNAME='Simon Ruderich'
export DEBFULLNAME
-
-elif [[ $uname == Darwin ]]; then # Mac OS X
- # Store the current clipboard in CLIPBOARD before every command so it can
- # be used in commands.
- os_darwin_preexec() {
- export CLIPBOARD="$(pbpaste)"
- }
- # Add the function as preexec hook.
- add-zsh-hook preexec os_darwin_preexec
-
- # Initialize CLIPBOARD so it's available for completion directly after
- # startup.
- CLIPBOARD=""
- export CLIPBOARD
-
- # Fetch current URL in clipboard with wget.
- alias wnc='wget --no-proxy $CLIPBOARD'
fi
# LOAD ADDITIONAL CONFIGURATION FILES
-# Load rc file for current hostname (first part before a dot) or rc.local.
-source_config ~/.zsh host rc ${$(hostname)//.*/}
+source_config ~/.zsh/rc.local
# RUN COMMANDS
# If not already in screen reattach to a running session or create a new one.
-# This also starts screen one a remote server when connecting through ssh.
-if [[ $TERM != dumb && -z $STY ]]; then
+# This also starts screen on a remote server when connecting through ssh.
+if [[ $TERM != dumb && $TERM != linux && -z $STY ]]; then
# Get running detached sessions.
session=$(screen -list | grep 'Detached' | awk '{ print $1; exit }')
fi
fi
+# Colorize stderr in red. Very useful when looking for errors. Thanks to
+# http://gentoo-wiki.com/wiki/Zsh for the basic script and Mikachu in #zsh on
+# Freenode (2010-03-07 04:03 CET) for some improvements (-r, printf). It's not
+# yet perfect and doesn't work with su and git for example, but it can handle
+# most interactive output quite well (even with no trailing new line) and in
+# cases it doesn't work, the E alias can be used as workaround.
+#
+# Moved in the "run commands" section to prevent one unnecessary zsh process
+# when starting screen (see above).
+exec 2>>(while read -r -k -u 0 line; do
+ printf '\e[91m%s\e[0m' "$line";
+ print -n $'\0';
+done &)
+
+# Run reminder and redisplay it every four hours (if it's available).
+PERIOD=14400
+periodic() {
+ which rem > /dev/null && rem -h
+}
+
-source_debug "finished sourcing ~/.zsh/rc"
+source_debug ". ~/.zsh/rc (done)"
# vim: ft=zsh
ruderich.org/simon / config / dotfiles.git / blobdiff