1 " Vim main configuration file.
3 " Copyright (C) 2008-2012 Simon Ruderich
5 " This file is free software: you can redistribute it and/or modify
6 " it under the terms of the GNU General Public License as published by
7 " the Free Software Foundation, either version 3 of the License, or
8 " (at your option) any later version.
10 " This file is distributed in the hope that it will be useful,
11 " but WITHOUT ANY WARRANTY; without even the implied warranty of
12 " MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 " GNU General Public License for more details.
15 " You should have received a copy of the GNU General Public License
16 " along with this file. If not, see <http://www.gnu.org/licenses/>.
21 " Save 'runtimepath' in case it was changed by the system's configuration
22 " files. Also save 'diff' as set all& resets it; but somehow later (after
23 " sourcing the vimrc - for example in a VimEnter autocmd) it gets
24 " automagically restored to the correct value.
26 let s:save_runtimepath = &runtimepath
27 let s:save_diff = &diff
29 " Reset all options (except 'term', 'lines' and 'columns'). This makes sure a
30 " system wide configuration file doesn't change default values.
32 " And restore it after all other options were reset.
34 let &runtimepath = s:save_runtimepath
35 let &diff = s:save_diff
36 unlet s:save_runtimepath
40 " Make sure Vim (and not Vi) settings are used.
43 " Use UTF-8 for all internal data (buffers, registers, etc.). This doesn't
44 " affect reading files in different encodings, see 'fileencodings' for that.
47 " Load my scripts from ~/.vim (my scripts) and ~/.vim/runtime (checkout of Vim
48 " runtime files) if available.
49 set runtimepath-=~/.vim
50 set runtimepath^=~/.vim,~/.vim/runtime
52 " Don't store swap files in the same directory as the edited file. But only if
53 " we have a "safe" writable directory available.
54 if filewritable('~/.tmp') == 2 || filewritable('~/tmp') == 2
57 " But store them in ~/.tmp or ~/tmp (already set by default) if available.
60 " Disable modelines as they may cause security problems. Instead use
61 " securemodelines (Vim script #1876).
64 " Complete to longest common string (list:longest) and then complete all full
65 " matches after another (full). Thanks to pbrisbin
66 " (http://pbrisbin.com:8080/dotfiles/vimrc).
67 set wildmode=list:longest,full
68 " Ignore case when completing files/directories.
69 if exists('+wildignorecase')
73 " Increase history of executed commands (:).
76 " Increase number of possible undos.
79 " Remember marks (including the last cursor position) for more files.
84 " Use strong encryption if possible, also used for swap/undo files.
85 if exists('+cryptmethod')
86 set cryptmethod=blowfish
89 " Clear all vimrc-related autocmds. Has to be done here as the vimrc augroup
90 " is used multiple times.
101 " Check if the given syntax group is available. Thanks to bairui in #vim on
102 " Freenode (2012-02-19 01:15 CET) for the try/catch silent highlight idea.
103 function! s:HasSyntaxGroup(group)
105 execute 'silent highlight ' . a:group
107 catch /^Vim\%((\a\+)\)\=:E411/ " 'highlight group not found'
113 " Check if the given Vim version and patch is available.
114 function! s:HasVersionAndPatch(version, patch)
115 return v:version > a:version
116 \ || (v:version == a:version && has('patch' . a:patch))
123 " Enable automatic file detection, plugin and indention support.
125 filetype off " necessary for pathogen to force a reload of ftplugins
126 filetype plugin indent on
129 " Use UTF-8 file encoding for all files. Automatically recognize latin1 in
131 set fileencodings=utf-8,latin1
133 " Always use unix line-endings for new files.
134 set fileformats=unix,dos
136 " Wrap text after 78 characters.
139 " Set tabs to 4 spaces, use softtabs.
143 " When < and > is used indent/deindent to the next 'shiftwidth' boundary.
145 " Use the default value for real tabs.
148 " Enable auto indention.
151 " When joining lines only add one space after a sentence.
154 " Allow backspacing over autoindent and line breaks.
155 set backspace=indent,eol
157 " Start a comment when hitting enter after a commented line (r) and when using
158 " o or O around a commented line (o).
159 set formatoptions+=ro
160 " Don't break a line if was already longer then 'textwidth' when insert mode
163 " Remove comment leader when joining lines where it makes sense.
164 if <SID>HasVersionAndPatch(703, 541)
168 " Allow virtual editing (cursor can be positioned anywhere, even when there is
169 " no character) in visual block mode.
170 set virtualedit=block
172 " Already display matches while typing the search command. This makes spotting
176 " Activate syntax folding.
178 set foldmethod=syntax
179 " Only use fold column if we have enough space (for example not in a
180 " (virtual) terminal which has only 80 columns).
184 set foldlevel=99 " no closed folds at default, 'foldenable' would disable
185 " folding which is not what I want
188 " Only check case if the searched word contains a capital character.
192 " Activate spell checking, use English as default.
193 if exists('+spell') && has('syntax')
194 " But not when diffing because spell checking is distracting in this case.
201 " Allow buffers with changes to be hidden. Very important for effective
202 " editing with multiple buffers. Prevents the "E37: No write since last change
203 " (add ! to override)" warning.
209 " Use a dark background. Doesn't change the background color, only sets text
210 " colors for a dark terminal.
213 " Use my color scheme if 256 colors are available.
214 if &t_Co == 256 || has('gui_running')
218 " Display line numbers.
220 " But use as little space as possible for the numbers column. Thanks to James
221 " Vega (http://git.jamessan.com/?p=etc/vim.git;a=summary).
222 if exists('+numberwidth')
225 " Display the ruler with current line/file position. If 'statusline' is used
226 " then this only affects <C-G>.
228 " Display partial commands in the status line.
231 " Don't redraw screen when executing macros; increases speed. Thanks to James
232 " Vega (http://git.jamessan.com/?p=etc/vim.git;a=summary).
235 " Visualize the line the cursor is currently in.
236 if exists('+cursorline')
240 " Highlight all matches on the screen when searching. Use <C-L> (see below) to
241 " remove the highlighting until the next search.
244 " Display some special characters.
247 " Display tabs as ">--------".
248 set listchars+=tab:>-
249 " Display trailing whitespace as "-".
250 set listchars+=trail:-
251 " Display markers for long lines when wrapping is disabled.
252 set listchars+=extends:>,precedes:<
253 " Display non-breakable space as "!".
255 set listchars+=nbsp:!
258 " Don't draw the vertical split separator by using space as character. Thanks
259 " to scp1 in #vim on Freenode (2012-06-16 16:12 CEST) for the idea to use a
260 " non-breakable space. But a simple space works as well, as long as the
261 " current color scheme is not reset.
262 if has('windows') && has('folding')
263 set fillchars+=vert:\ " comment to prevent trailing whitespace
267 " Always display the status line even if there is only one window.
270 " If there's more than one buffer return "/<nr>" (e.g. "/05") where <nr>
271 " is the highest buffer number, otherwise return nothing. Used in
272 " 'statusline' to get an overview of available buffer numbers.
273 function! StatuslineBufferCount()
274 let l:bufnr = bufnr('$')
278 let l:result .= printf('%02d', l:bufnr)
280 " Older Vims don't have printf() (and no .= either). Emulate
283 let l:result = l:result . '0'
285 let l:result = l:result . l:bufnr
293 " Like %f but use relative filename if it's shorter than the absolute path
294 " (e.g. '../../file' vs. '~/long/path/to/file'). fnamemodify()'s ':.' is
295 " not enough because it doesn't create '../'s.
296 function! StatuslineRelativeFilename()
297 " Display only filename for help files.
298 if &buftype == 'help'
301 " Special case for scratch files.
302 if &buftype == 'nofile'
306 let l:path = expand('%')
311 " Path is already relative, nothing to do.
312 if stridx(l:path, '/') != 0
316 " Absolute path to this file.
317 let l:path = expand('%:p')
318 " Shortened path to this file, thanks to bairui in #vim on Freenode
319 " (2012-06-23 00:54) for the tip to use fnamemodify(). This is what
320 " Vim normally uses as %f (minus some exceptions).
321 let l:original_path = fnamemodify(l:path, ':~')
322 " Absolute path to the current working directory.
325 " Working directory completely contained in path, replace it with a
326 " relative path. Happens for example when opening a file with netrw.
327 " %f displays this as absolute path, but we want a relative path of
329 if stridx(l:path, l:cwd) == 0
330 return strpart(l:path, strlen(l:cwd) + 1)
333 let l:path_list = split(l:path, '/')
334 let l:cwd_list = split(l:cwd, '/')
336 " Remove the common path.
337 while l:path_list[0] == l:cwd_list[0]
338 call remove(l:path_list, 0)
339 call remove(l:cwd_list, 0)
342 " Add as many '..' as necessary for the relative path and join the
343 " path. Thanks to Raimondi in #vim on Freenode (2012-06-23 01:13) for
344 " the hint to use repeat() instead of a loop.
345 let l:path = repeat('../', len(l:cwd_list)) . join(l:path_list, '/')
347 " Use the shorter path, either relative or absolute.
348 if strlen(l:path) < strlen(l:original_path)
351 return l:original_path
357 set statusline+=%02n " buffer number
358 set statusline+=%{StatuslineBufferCount()} " highest buffer number
360 if has('modify_fname') && v:version >= 700 " some functions need 7.0
361 set statusline+=%{StatuslineRelativeFilename()} " path to current file
362 set statusline+=\ " space after path
364 set statusline+=%f\ " path to current file in buffer
366 set statusline+=%h " [help] if buffer is help file
367 set statusline+=%w " [Preview] if buffer is preview buffer
368 set statusline+=%m " [+] if buffer was modified,
369 " [-] if 'modifiable' is off
370 set statusline+=%r " [RO] if buffer is read only
373 set statusline+=%= " right align
374 set statusline+=0x%-8B\ " current character under cursor as hex
375 set statusline+=%-12.(%l,%c%V%)\ " line number (%l),
376 " column number (%c),
377 " virtual column number if different
379 set statusline+=%P " position in file in percent
383 " MAPPINGS (except for plugins, see PLUGIN SETTINGS below)
385 " noremap is used to make sure the right side is executed as is and can't be
386 " modified by a plugin or other settings. Except for <Nop> which isn't
387 " affected by mappings.
389 " Easy way to exit insert mode. jk is preferred because it's faster.
392 " Also for command mode, thanks to http://github.com/mitechie/pyvim
397 " Disable arrow keys for all modes except command modes. Thanks to James Vega
398 " (http://git.jamessan.com/?p=etc/vim.git;a=summary).
407 " Also disable arrow keys in command mode, use <C-P>/<C-N> as replacement (see
414 " Use <C-P>/<C-N> as replacement for <Up>/<Down> in command mode. Thanks to
415 " abstrakt and grayw in #vim on Freenode (2010-04-12 21:20 CEST).
417 cnoremap <C-N> <Down>
420 " Don't move the cursor to the first column for certain scroll commands (<C-F,
421 " <C-B>, <C-D>, <C-U>). Thanks to jamessan in #vim on Freenode (2011-08-31
422 " 02:27 CEST) for the 'nostartofline' tip. But I can't use 'nostartofline'
423 " directly because it also enables that feature for other commands which I
426 " Set 'nostartofline' for a single movement.
427 function! s:TemporaryNostartofline(movement)
428 let l:startofline = &startofline
430 execute 'normal! ' . a:movement
431 let &startofline = l:startofline
434 " Thanks to fow in #vim on Freenode (2012-02-16 15:38 CET) for the idea to
435 " use "<Bslash><Lt>"; Vim documentation reference: :help <>.
436 nnoremap <silent> <C-F>
437 \ :call <SID>TemporaryNostartofline("<Bslash><Lt>C-F>")<CR>
438 nnoremap <silent> <C-B>
439 \ :call <SID>TemporaryNostartofline("<Bslash><Lt>C-B>")<CR>
440 nnoremap <silent> <C-D>
441 \ :call <SID>TemporaryNostartofline("<Bslash><Lt>C-D>")<CR>
442 nnoremap <silent> <C-U>
443 \ :call <SID>TemporaryNostartofline("<Bslash><Lt>C-U>")<CR>
446 " Write before suspending, thanks to deryni in #vim on Freenode (2011-05-09
447 " 20:02 CEST). To suspend without saving either unmap this or use :stop<CR>.
448 " Only the current buffer is written, thus switching to another buffer works
450 nnoremap <silent> <C-Z> :update<CR>:stop<CR>
452 " 2<C-G> gives more verbose information, use it by default. Thanks to NCS_One
453 " in #vim on Freenode (2011-08-15 00:17 CEST).
454 nnoremap <C-G> 2<C-G>
456 " Use <Space> to move down a page and - to move up one like in mutt. Don't use
457 " nnoremap so the <C-F>/<C-B> 'nostartofline' fix (see above) works.
461 " Go to next and previous buffer. Thanks to elik in #vim on Freenode
462 " (2010-05-16 18:38 CEST) for this idea.
463 nnoremap <silent> gb :bnext<CR>
464 nnoremap <silent> gB :bprevious<CR>
466 " But when starting again at the first buffer, print a warning which
467 " reminds me that I've already seen that buffer.
468 function! s:NextBuffer()
469 " Are we currently on the last buffer and moving to the first?
470 let l:last_buffer = 0
471 if bufnr('%') == bufnr('$') && bufnr('$') > 1
472 let l:last_buffer = 1
475 " Go to the next buffer.
479 " Go to the first buffer, silent is necessary or the following message
480 " won't be displayed because it's overwritten by the status message
481 " displayed when entering a buffer.
486 echo 'Starting again at first buffer.'
490 nnoremap <silent> gb :call <SID>NextBuffer()<CR>
493 " Fast access to buffers.
494 nnoremap <silent> <Leader>1 :1buffer<CR>
495 nnoremap <silent> <Leader>2 :2buffer<CR>
496 nnoremap <silent> <Leader>3 :3buffer<CR>
497 nnoremap <silent> <Leader>4 :4buffer<CR>
498 nnoremap <silent> <Leader>5 :5buffer<CR>
499 nnoremap <silent> <Leader>6 :6buffer<CR>
500 nnoremap <silent> <Leader>7 :7buffer<CR>
501 nnoremap <silent> <Leader>8 :8buffer<CR>
502 nnoremap <silent> <Leader>9 :9buffer<CR>
503 nnoremap <silent> <Leader>0 :10buffer<CR>
505 " Make last active window the only window. Similar to <C-W> o.
506 nnoremap <C-W>O <C-W>p<C-W>o
508 " Maps to change spell language between English and German and disable spell
511 nnoremap <silent> <Leader>sn :set nospell<CR>
512 nnoremap <silent> <Leader>se :set spell spelllang=en_us<CR>
513 nnoremap <silent> <Leader>sd :set spell spelllang=de_de<CR>
516 " Add semicolon to the end of the line. Thanks to
517 " http://www.van-laarhoven.org/vim/.vimrc for this idea and godlygeek in #vim
518 " on Freenode for an improved version which doesn't clobber any marks.
519 nnoremap <silent> <Leader>; :call setline(line('.'), getline('.') . ';')<CR>
521 " * and # for selections in visual mode. Thanks to
522 " http://got-ravings.blogspot.com/2008/07/vim-pr0n-visual-search-mappings.html
523 " and all nerds involved (godlygeek, strull in #vim on Freenode).
525 function! s:VSetSearch()
528 " Added \C to force 'noignorecase' while searching the current visual
529 " selection. I want to search for the exact string in this case.
530 let @/ = '\C' . '\V' . substitute(escape(@@, '\'), '\n', '\\n', 'g')
533 vnoremap * :<C-U>call <SID>VSetSearch()<CR>//<CR>
534 vnoremap # :<C-U>call <SID>VSetSearch()<CR>??<CR>
537 " I often type "W" instead of "w" when trying to save a file. Fix my mistake.
538 " Thanks to Tony Mechelynck <antoine.mechelynck@gmail.com> from the Vim
539 " mailing list for the commands.
547 \ ((getcmdtype() == ':' && getcmdpos() <= 2) ? 'w' : 'W')
548 cnoreabbrev <expr> Wa
549 \ ((getcmdtype() == ':' && getcmdpos() <= 3) ? 'wa' : 'Wa')
550 cnoreabbrev <expr> Wq
551 \ ((getcmdtype() == ':' && getcmdpos() <= 3) ? 'wq' : 'Wq')
552 cnoreabbrev <expr> Wqa
553 \ ((getcmdtype() == ':' && getcmdpos() <= 4) ? 'wqa' : 'Wqa')
555 " Also fix my typo with "Q".
561 \ ((getcmdtype() == ':' && getcmdpos() <= 2) ? 'q' : 'Q')
562 cnoreabbrev <expr> Qa
563 \ ((getcmdtype() == ':' && getcmdpos() <= 3) ? 'qa' : 'Qa')
566 " In case 'hlsearch' is used disable it with <C-L>. Thanks to frogonwheels and
567 " vimgor (bot) in #vim on Freenode (2010-03-30 05:58 CEST).
568 noremap <silent> <C-L> :nohlsearch<CR><C-L>
570 " <C-U> in insert mode deletes a lot, break undo sequence before deleting the
571 " line so the change can be undone. Thanks to the vimrc_example.vim file in
573 inoremap <C-U> <C-G>u<C-U>
574 " Same for <C-@> (insert previously inserted text and leave insert mode).
575 inoremap <C-@> <C-G>u<C-@>
576 " And for <C-A> (insert previously inserted text).
577 inoremap <C-A> <C-G>u<C-A>
578 " And for <C-W> (delete word before cursor).
579 inoremap <C-W> <C-G>u<C-W>
582 " New text-objects ii and ai to work on text with the same indentation. Thanks
583 " to http://vim.wikia.com/index.php?title=Indent_text_object&oldid=27126
584 " (visited on 2011-11-19).
585 onoremap <silent> ai :<C-U>call <SID>IndTxtObj(0)<CR>
586 onoremap <silent> ii :<C-U>call <SID>IndTxtObj(1)<CR>
587 vnoremap <silent> ai :<C-U>call <SID>IndTxtObj(0)<CR><Esc>gv
588 vnoremap <silent> ii :<C-U>call <SID>IndTxtObj(1)<CR><Esc>gv
590 function! s:IndTxtObj(inner)
591 let curline = line(".")
592 let lastline = line("$")
593 let i = indent(line(".")) - &shiftwidth * (v:count1 - 1)
594 let i = i < 0 ? 0 : i
595 if getline(".") !~ "^\\s*$"
596 let p = line(".") - 1
597 let nextblank = getline(p) =~ "^\\s*$"
599 \ && ((i == 0 && !nextblank)
600 \ || (i > 0 && ((indent(p) >= i
601 \ && !(nextblank && a:inner))
602 \ || (nextblank && !a:inner))))
604 let p = line(".") - 1
605 let nextblank = getline(p) =~ "^\\s*$"
608 call cursor(curline, 0)
609 let p = line(".") + 1
610 let nextblank = getline(p) =~ "^\\s*$"
612 \ && ((i == 0 && !nextblank)
613 \ || (i > 0 && ((indent(p) >= i
614 \ && !(nextblank && a:inner))
615 \ || (nextblank && !a:inner))))
617 let p = line(".") + 1
618 let nextblank = getline(p) =~ "^\\s*$"
628 " Fix some of my spelling mistakes (German).
629 inoreabbrev relle reelle
630 inoreabbrev reele reelle
631 " Fix some of my spelling mistakes (English).
632 inoreabbrev completly completely
637 " Activate syntax coloring.
641 " Don't highlight more than 500 columns as I normally don't have that long
642 " lines and they slow down syntax coloring. Thanks to Derek Wyatt
643 " (http://www.derekwyatt.org/vim/the-vimrc-file/).
644 if exists('+synmaxcol')
648 " Use (limited) syntax based omni completion if no other omni completion is
649 " available. Taken from :help ft-syntax-omni.
650 if has('autocmd') && exists('+omnifunc')
653 \ if &omnifunc == '' |
654 \ setlocal omnifunc=syntaxcomplete#Complete |
659 " Function to enable all custom highlights. Necessary as highlights are
660 " window-local and thus must be set for each new window.
661 function! s:CustomSyntaxHighlights()
662 " Not the first time called, nothing to do.
663 if exists('w:vimrc_syntax_run')
666 let w:vimrc_syntax_run = 1
668 " Highlight lines longer than 78 characters. Thanks to Tony Mechelynck
669 " <antoine.mechelynck@gmail.com> from the Vim mailing list. It can easily be
670 " disabled when necessary with :2match (in Vim >= 700).
671 if !&diff && exists(':2match')
672 " Use ColorColumn for overlong lines if available and my color
674 if &t_Co == 256 && <SID>HasSyntaxGroup('ColorColumn')
675 2match ColorColumn /\%>78v./
677 2match Todo /\%>78v./
683 if exists('*matchadd')
684 " Highlight some important keywords in all documents.
685 let l:todos = ['TODO', 'XXX', 'FIXME',
686 \ 'CHANGED', 'REMOVED', 'DELETED']
687 " Compatibility fix for Vim 6.4 which can't handle for in function
688 " (without function it's ignored).
689 execute ' for l:x in l:todos'
690 \ '| call matchadd("Todo", l:x)'
693 " Highlight Unicode whitespace which is no normal whitespace (0x20).
694 let l:spaces = ['00a0', '1680', '180e', '2000', '2001', '2002',
695 \ '2003', '2004', '2005', '2006', '2007', '2008',
696 \ '2009', '200a', '200b', '200c', '200d', '202f',
697 \ '205f', '2060', '3000', 'feff']
698 " Compatibility fix for Vim 6.4. Escape \ inside the " string or
700 execute ' for l:x in l:spaces'
701 \ '| call matchadd("Error", "\\%u" . l:x)'
704 " Special highlight for tabs to reduce their visibility in contrast to other
705 " SpecialKey characters (e.g. ^L).
706 if &t_Co == 256 && <SID>HasSyntaxGroup('specialKeyTab')
707 call matchadd('specialKeyTab', '\t')
711 " Enable highlights for the current and all new windows. Thanks to bairui in
712 " #vim on Freenode (2012-04-01 00:22 CEST) for the WinEnter suggestion.
713 call <SID>CustomSyntaxHighlights()
716 autocmd WinEnter * call <SID>CustomSyntaxHighlights()
720 " Settings for specific filetypes.
723 let g:c_no_if0_fold = 1 " fix weird double fold in #if0 in recent versions
725 let g:hs_highlight_delimiters = 1
726 let g:hs_highlight_boolean = 1
727 let g:hs_highlight_types = 1
728 let g:hs_highlight_more_types = 1
731 let g:perl_fold_blocks = 1
732 let g:perl_nofold_packages = 1
733 let g:perl_include_pod = 1 " syntax coloring for PODs
735 let g:python_highlight_all = 1
737 let g:sh_noisk = 1 " don't add . to 'iskeyword'
738 let g:sh_is_posix = 1 " POSIX shell (e.g. dash) is compatible enough
739 let g:sh_fold_enabled = 7 " functions (1), heredoc (2) and if/do/for (4)
741 let g:vimsyn_embed = 0 " don't highlight embedded languages
742 let g:vimsyn_folding = 'af' " folding for autogroups (a) and functions (f)
744 let g:xml_syntax_folding = 1
751 " Use pathogen which allows one 'runtimepath' entry per plugin. This makes
752 " installing/removing/updating plugins simple. (Used for plugins with more
753 " than one file.) Ignore errors in case pathogen is not installed.
755 silent! execute 'call pathogen#infect()'
758 " Settings for securemodelines.
759 " Only allow items I need (also includes spl which is not enabled by
761 if v:version >= 700 " need lists
762 let g:secure_modelines_allowed_items = ['ft', 'spl', 'fdm',
763 \ 'sw', 'sts', 'noet']
766 " Settings for the NERD commenter.
767 " Don't create any mappings I don't want to use.
768 let g:NERDCreateDefaultMappings = 0
769 " Map toggle comment.
770 nmap <Leader><Leader> <Plug>NERDCommenterToggle
772 " XPTemplate settings.
773 " Try to maintain snippet rendering even after editing outside of a
775 let g:xptemplate_strict = 0
776 " Don't complete any braces automatically.
777 let g:xptemplate_brace_complete = 0
778 " Only highlight the current placeholder.
779 let g:xptemplate_highlight = 'current'
785 " Use a custom auto group to prevent problems when the vimrc files is sourced
790 " Go to last position of opened files. Taken from :help last-position-jump.
791 autocmd BufReadPost *
792 \ if line("'\"") > 1 && line("'\"") <= line('$') |
793 \ execute "normal! g'\"" |
795 " But not for Git commits, go to beginning of the file.
796 autocmd BufReadPost COMMIT_EDITMSG normal! gg
798 " Make sure 'list' and 'number' is disabled in help files. This is necessary
799 " when switching to a help buffer which is in the background with :buffer as
800 " these options are local to windows (and not only to buffers). This happens
801 " because I often want to use only one window and thus the help buffer is in
803 autocmd BufWinEnter *.txt
804 \ if &filetype == 'help' |
806 \ setlocal nonumber |
809 " Automatically disable 'paste' mode when leaving insert mode. Thanks to
810 " Raimondi in #vim on Freenode (2010-08-14 23:01 CEST). Very useful as I only
811 " want to paste once and then 'paste' gets automatically unset. InsertLeave
812 " doesn't exist in older Vims.
813 if exists('##InsertLeave')
814 autocmd InsertLeave * set nopaste
817 " Write file when running :mak[e] before 'makeprg' is called. QuickFixCmdPre
818 " doesn't exist in older Vims.
819 if exists('##QuickFixCmdPre')
820 autocmd QuickFixCmdPre * write
823 " Don't ignore case while in insert mode, but ignore case in all other modes.
824 " This causes <C-N>/<C-P> to honor the case and thus only complete matching
825 " capitalization. But while searching (/) 'ignorecase' is used.
826 " InsertEnter/InsertLeave doesn't exist in older Vims.
827 if exists('##InsertEnter') && exists('##InsertLeave')
828 autocmd InsertEnter * set noignorecase
829 autocmd InsertLeave * set ignorecase
832 " AFTER/FTPLUGIN AUTO COMMANDS
834 " Disable spell checking for files which don't need it.
835 autocmd FileType deb setlocal nospell
836 autocmd FileType diff setlocal nospell
837 autocmd FileType tar setlocal nospell
838 " Fix to allow Vim edit crontab files as crontab doesn't work with
840 autocmd FileType crontab setlocal backupcopy=yes
841 " Don't use the modeline in git commits as the diff created by `git commit -v`
842 " may contain one which could change the filetype or other settings of the
843 " commit buffer. Also make sure we use only 72 characters per line which is
844 " the recommendation for git commit messages (http://tpope.net/node/106).
845 autocmd FileType gitcommit let g:secure_modelines_allowed_items = [] |
846 \ setlocal textwidth=72
847 " Use the same comment string as for Vim files in Vimperator files.
848 autocmd FileType vimperator setlocal commentstring=\"%s
849 " Use TeX compiler for (La)TeX files.
850 autocmd FileType tex compiler tex
852 " FTDETECT AUTO COMMANDS
854 " Recognize .md as markdown files (Vim default is .mkd).
855 autocmd BufRead,BufNewFile *.md set filetype=mkd
856 " Recognize .test as Tcl files.
857 autocmd BufRead,BufNewFile *.test set filetype=tcl
859 " OTHER AUTO COMMANDS
861 " Disable spell checking, displaying of list characters and long lines when
862 " viewing documentation.
863 autocmd BufReadPost /usr/share/doc/* setlocal nospell nolist | 2match
865 " Use diff filetype for mercurial patches in patch queue.
866 autocmd BufReadPost */.hg/patches/* set filetype=diff
872 " CUSTOM FUNCTIONS AND COMMANDS
875 " Convenient command to see the difference between the current buffer and the
876 " file it was loaded from, thus the changes you made. Thanks to the
877 " vimrc_example.vim file in Vim's source. Modified to use the same filetype
878 " for the diffed file than the filetype for the original file.
879 if !exists(':DiffOrig')
881 \ let s:diff_orig_filetype = &filetype
883 \ | let &filetype = s:diff_orig_filetype
884 \ | unlet s:diff_orig_filetype
885 \ | set buftype=nofile